Re: [Qemu-devel] [PATCH v4 4/6] target-arm: Add the Hypervisor timer

[Peter Maydell]

On 5 June 2015 at 11:33, Edgar E. Iglesias <address@hidden> wrote:
> From: "Edgar E. Iglesias" <address@hidden>
>
> Signed-off-by: Edgar E. Iglesias <address@hidden>
> ---

>  static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
>      /* Note that CNTFRQ is purely reads-as-written for the benefit
>       * of software; writing it doesn't actually change the timer frequency.
> @@ -2648,6 +2683,18 @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
>      { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14,
>        .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
>        .resetvalue = 0 },
> +    { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1,
> +      .access = PL2_RW,
> +      .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore, },
> +    { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2,
> +      .access = PL2_RW,
> +      .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore, },
> +    { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0,
> +      .access = PL2_RW,
> +      .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore, },

raz/wi should be implemented as ARM_CP_CONST...

Consider ordering these three defs CVAL, TVAL, CTL, so they're
in the natural order by opc2? (Ditto below.)

Can we have the AArch32 bindings too, please?

>      REGINFO_SENTINEL
>  };
>
> @@ -2774,6 +2821,23 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
>        .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS | ARM_CP_IO,
>        .writefn = gt_cntvoff_write,
>        .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) },
> +    { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_AA64,
> +      .type = ARM_CP_IO,
> +      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1,
> +      .access = PL2_RW,
> +      .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].ctl),
> +      .resetvalue = 0,
> +      .writefn = gt_hyp_ctl_write, .raw_writefn = raw_write },
> +    { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2,
> +      .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval),
> +      .type = ARM_CP_IO, .access = PL2_RW,
> +      .writefn = gt_hyp_cval_write, .raw_writefn = raw_write },
> +    { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0,
> +      .type = ARM_CP_IO, .access = PL2_RW,
> +      .resetfn = gt_hyp_cnt_reset,
> +      .readfn = gt_hyp_tval_read, .writefn = gt_hyp_tval_write },
>  #endif
>      REGINFO_SENTINEL
>  };

-- PMM