qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v8 04/11] i.MX: Split the i.MX EPIT emulator int


From: Peter Crosthwaite
Subject: Re: [Qemu-devel] [PATCH v8 04/11] i.MX: Split the i.MX EPIT emulator into a header file and a source file.
Date: Tue, 30 Jun 2015 00:12:20 -0700

On Mon, Jun 29, 2015 at 1:11 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> This is to prepare to accomodate the SOC requirements.
>
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
>
> Changes since v1:
>     * not present on v1
>
> Changes since v2:
>     * not present on v2
>
> Changes since v3:
>     * not present on v3
>
> Changes since v4:
>     * not present on v4
>
> Changes since v5:
>     * not present on v5
>
> Changes since v6:
>     * not present on v6
>
> Changes since v7:
>     * Splited the i.MX EPIT emulator into a header file and a source file
>
>  hw/timer/imx_epit.c         | 65 +++++------------------------------
>  include/hw/timer/imx_epit.h | 83 
> +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 92 insertions(+), 56 deletions(-)
>  create mode 100644 include/hw/timer/imx_epit.h
>
> diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c
> index ffefc22..39fc3f1 100644
> --- a/hw/timer/imx_epit.c
> +++ b/hw/timer/imx_epit.c
> @@ -5,23 +5,17 @@
>   * Copyright (c) 2011 NICTA Pty Ltd
>   * Originally written by Hans Jiang
>   * Updated by Peter Chubb
> - * Updated by Jean-Christophe Dubois
> + * Updated by Jean-Christophe Dubois <address@hidden>
>   *
>   * This code is licensed under GPL version 2 or later.  See
>   * the COPYING file in the top-level directory.
>   *
>   */
>
> -#include "hw/hw.h"
> -#include "qemu/bitops.h"
> -#include "qemu/timer.h"
> -#include "hw/ptimer.h"
> -#include "hw/sysbus.h"
> -#include "hw/arm/imx.h"
> +#include "hw/timer/imx_epit.h"
> +#include "hw/misc/imx_ccm.h"
>  #include "qemu/main-loop.h"
>
> -#define TYPE_IMX_EPIT "imx.epit"
> -
>  #define DEBUG_TIMER 0
>  #if DEBUG_TIMER
>
> @@ -61,30 +55,6 @@ static char const *imx_epit_reg_name(uint32_t reg)
>  #  define IPRINTF(fmt, args...) do {} while (0)
>  #endif
>
> -#define IMX_EPIT(obj) \
> -        OBJECT_CHECK(IMXEPITState, (obj), TYPE_IMX_EPIT)
> -
> -/*
> - * EPIT: Enhanced periodic interrupt timer
> - */
> -
> -#define CR_EN       (1 << 0)
> -#define CR_ENMOD    (1 << 1)
> -#define CR_OCIEN    (1 << 2)
> -#define CR_RLD      (1 << 3)
> -#define CR_PRESCALE_SHIFT (4)
> -#define CR_PRESCALE_MASK  (0xfff)
> -#define CR_SWR      (1 << 16)
> -#define CR_IOVW     (1 << 17)
> -#define CR_DBGEN    (1 << 18)
> -#define CR_WAITEN   (1 << 19)
> -#define CR_DOZEN    (1 << 20)
> -#define CR_STOPEN   (1 << 21)
> -#define CR_CLKSRC_SHIFT (24)
> -#define CR_CLKSRC_MASK  (0x3 << CR_CLKSRC_SHIFT)
> -
> -#define EPIT_TIMER_MAX  0XFFFFFFFFUL
> -
>  /*
>   * Exact clock frequencies vary from board to board.
>   * These are typical.
> @@ -96,23 +66,6 @@ static const IMXClk imx_epit_clocks[] =  {
>      CLK_32k,  /* 11 ipg_clk_32k -- ~32kHz */
>  };
>
> -typedef struct {
> -    SysBusDevice busdev;
> -    ptimer_state *timer_reload;
> -    ptimer_state *timer_cmp;
> -    MemoryRegion iomem;
> -    DeviceState *ccm;
> -
> -    uint32_t cr;
> -    uint32_t sr;
> -    uint32_t lr;
> -    uint32_t cmp;
> -    uint32_t cnt;
> -
> -    uint32_t freq;
> -    qemu_irq irq;
> -} IMXEPITState;
> -
>  /*
>   * Update interrupt status
>   */
> @@ -174,9 +127,9 @@ static void imx_epit_reset(DeviceState *dev)
>
>  static uint32_t imx_epit_update_count(IMXEPITState *s)
>  {
> -     s->cnt = ptimer_get_count(s->timer_reload);
> +    s->cnt = ptimer_get_count(s->timer_reload);
>
> -     return s->cnt;
> +    return s->cnt;
>  }
>
>  static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
> @@ -344,13 +297,13 @@ void imx_timerp_create(const hwaddr addr, qemu_irq irq, 
> DeviceState *ccm)
>  }
>
>  static const MemoryRegionOps imx_epit_ops = {
> -  .read = imx_epit_read,
> -  .write = imx_epit_write,
> -  .endianness = DEVICE_NATIVE_ENDIAN,
> +    .read = imx_epit_read,
> +    .write = imx_epit_write,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
>  };
>
>  static const VMStateDescription vmstate_imx_timer_epit = {
> -    .name = "imx.epit",
> +    .name = TYPE_IMX_EPIT,
>      .version_id = 2,
>      .minimum_version_id = 2,
>      .fields = (VMStateField[]) {
> diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h
> new file mode 100644
> index 0000000..dbc99ca
> --- /dev/null
> +++ b/include/hw/timer/imx_epit.h
> @@ -0,0 +1,83 @@
> +/*
> + * i.MX EPIT Timer
> + *
> + * Copyright (c) 2008 OK Labs
> + * Copyright (c) 2011 NICTA Pty Ltd
> + * Originally written by Hans Jiang
> + * Updated by Peter Chubb
> + * Updated by Jean-Christophe Dubois <address@hidden>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#ifndef IMX_EPIT_H
> +#define IMX_EPIT_H
> +
> +#include "hw/sysbus.h"
> +#include "hw/ptimer.h"
> +
> +/*
> + * EPIT: Enhanced periodic interrupt timer
> + */
> +
> +#define CR_EN       (1 << 0)
> +#define CR_ENMOD    (1 << 1)
> +#define CR_OCIEN    (1 << 2)
> +#define CR_RLD      (1 << 3)
> +#define CR_PRESCALE_SHIFT (4)
> +#define CR_PRESCALE_MASK  (0xfff)
> +#define CR_SWR      (1 << 16)
> +#define CR_IOVW     (1 << 17)
> +#define CR_DBGEN    (1 << 18)
> +#define CR_WAITEN   (1 << 19)
> +#define CR_DOZEN    (1 << 20)
> +#define CR_STOPEN   (1 << 21)
> +#define CR_CLKSRC_SHIFT (24)
> +#define CR_CLKSRC_MASK  (0x3 << CR_CLKSRC_SHIFT)
> +
> +#define EPIT_TIMER_MAX  0XFFFFFFFFUL
> +
> +#define TYPE_IMX_EPIT "imx.epit"
> +#define IMX_EPIT(obj) OBJECT_CHECK(IMXEPITState, (obj), TYPE_IMX_EPIT)
> +
> +typedef struct {
> +    /* <private> */
> +    SysBusDevice parent_obj;
> +
> +    /* <public> */
> +    ptimer_state *timer_reload;
> +    ptimer_state *timer_cmp;
> +    MemoryRegion iomem;
> +    DeviceState *ccm;
> +
> +    uint32_t cr;
> +    uint32_t sr;
> +    uint32_t lr;
> +    uint32_t cmp;
> +    uint32_t cnt;
> +
> +    uint32_t freq;
> +    qemu_irq irq;
> +} IMXEPITState;
> +
> +void imx_timerp_create(const hwaddr addr,
> +                       qemu_irq irq,
> +                       DeviceState *ccm);
> +

Qdev construction helpers are depracated in favor of just inlining the
qdev_creation process in the machine model. Since this is pre-existing
though, I would just leave it in imx.h.

Regards,
Peter

> +#endif /* IMX_EPIT_H */
> --
> 2.1.4
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]