[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v7 2/6] Implement GIC-500 base class
|
From: |
Pavel Fedin |
|
Subject: |
[Qemu-devel] [PATCH v7 2/6] Implement GIC-500 base class |
|
Date: |
Fri, 24 Jul 2015 12:55:44 +0300 |
From: Shlomo Pongratz <address@hidden>
This class is to be used by both software and KVM implementations of GICv3
Signed-off-by: Shlomo Pongratz <address@hidden>
Signed-off-by: Pavel Fedin <address@hidden>
---
hw/intc/Makefile.objs | 1 +
hw/intc/arm_gicv3_common.c | 249 +++++++++++++++++++++++++++++++++++++
hw/intc/gicv3_internal.h | 156 +++++++++++++++++++++++
include/hw/intc/arm_gicv3_common.h | 112 +++++++++++++++++
4 files changed, 518 insertions(+)
create mode 100644 hw/intc/arm_gicv3_common.c
create mode 100644 hw/intc/gicv3_internal.h
create mode 100644 include/hw/intc/arm_gicv3_common.h
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 092d8a8..1317e5a 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -12,6 +12,7 @@ common-obj-$(CONFIG_IOAPIC) += ioapic_common.o
common-obj-$(CONFIG_ARM_GIC) += arm_gic_common.o
common-obj-$(CONFIG_ARM_GIC) += arm_gic.o
common-obj-$(CONFIG_ARM_GIC) += arm_gicv2m.o
+common-obj-$(CONFIG_ARM_GIC) += arm_gicv3_common.o
common-obj-$(CONFIG_OPENPIC) += openpic.o
obj-$(CONFIG_APIC) += apic.o apic_common.o
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
new file mode 100644
index 0000000..5a10784
--- /dev/null
+++ b/hw/intc/arm_gicv3_common.c
@@ -0,0 +1,249 @@
+/*
+ * ARM GICv3 support - common bits of emulated and KVM kernel model
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Copyright (c) 2015 Huawei.
+ * Written by Peter Maydell
+ * Extended to 64 cores by Shlomo Pongratz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "gicv3_internal.h"
+
+static void gicv3_pre_save(void *opaque)
+{
+ GICv3State *s = (GICv3State *)opaque;
+ ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
+
+ if (c->pre_save) {
+ c->pre_save(s);
+ }
+}
+
+static int gicv3_post_load(void *opaque, int version_id)
+{
+ GICv3State *s = (GICv3State *)opaque;
+ ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
+
+ if (c->post_load) {
+ c->post_load(s);
+ }
+ return 0;
+}
+
+static const VMStateDescription vmstate_gicv3_irq_state = {
+ .name = "arm_gicv3_irq_state",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(pending, gicv3_irq_state),
+ VMSTATE_UINT64(active, gicv3_irq_state),
+ VMSTATE_UINT64(level, gicv3_irq_state),
+ VMSTATE_UINT64(group, gicv3_irq_state),
+ VMSTATE_BOOL(edge_trigger, gicv3_irq_state),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_gicv3_sgi_state = {
+ .name = "arm_gicv3_sgi_state",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64_ARRAY(pending, gicv3_sgi_state, GICV3_NCPU),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_gicv3 = {
+ .name = "arm_gicv3",
+ .version_id = 7,
+ .minimum_version_id = 7,
+ .pre_save = gicv3_pre_save,
+ .post_load = gicv3_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(ctlr, GICv3State),
+ VMSTATE_UINT32_ARRAY(cpu_ctlr, GICv3State, GICV3_NCPU),
+ VMSTATE_STRUCT_ARRAY(irq_state, GICv3State, GICV3_MAXIRQ, 1,
+ vmstate_gicv3_irq_state, gicv3_irq_state),
+ VMSTATE_UINT64_ARRAY(irq_target, GICv3State, GICV3_MAXIRQ),
+ VMSTATE_UINT8_2DARRAY(priority1, GICv3State, GIC_INTERNAL,
+ GICV3_NCPU),
+ VMSTATE_UINT8_ARRAY(priority2, GICv3State,
+ GICV3_MAXIRQ - GIC_INTERNAL),
+ VMSTATE_UINT16_2DARRAY(last_active, GICv3State, GICV3_MAXIRQ,
+ GICV3_NCPU),
+ VMSTATE_STRUCT_ARRAY(sgi_state, GICv3State, GIC_NR_SGIS, 1,
+ vmstate_gicv3_sgi_state, gicv3_sgi_state),
+ VMSTATE_UINT16_ARRAY(priority_mask, GICv3State, GICV3_NCPU),
+ VMSTATE_UINT16_ARRAY(running_irq, GICv3State, GICV3_NCPU),
+ VMSTATE_UINT16_ARRAY(running_priority, GICv3State, GICV3_NCPU),
+ VMSTATE_UINT16_ARRAY(current_pending, GICv3State, GICV3_NCPU),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(s);
+ int i;
+
+ /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
+ * GPIO array layout is thus:
+ * [0..N-1] spi
+ * [N..N+31] PPIs for CPU 0
+ * [N+32..N+63] PPIs for CPU 1
+ * ...
+ */
+ i = s->num_irq - GIC_INTERNAL + GIC_INTERNAL * s->num_cpu;
+ qdev_init_gpio_in(DEVICE(s), handler, i);
+
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_irq[i]);
+ }
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_fiq[i]);
+ }
+
+ memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s,
+ "gicv3_dist", 0x10000);
+ memory_region_init_io(&s->iomem_lpi, OBJECT(s), ops ? &ops[1] : NULL, s,
+ "gicv3_redist", 0x800000);
+
+ sysbus_init_mmio(sbd, &s->iomem_dist);
+ sysbus_init_mmio(sbd, &s->iomem_lpi);
+}
+
+static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
+{
+ GICv3State *s = ARM_GICV3_COMMON(dev);
+ int num_irq = s->num_irq;
+
+ if (s->num_cpu > GICV3_NCPU) {
+ error_setg(errp, "requested %u CPUs exceeds GIC maximum %d",
+ s->num_cpu, GICV3_NCPU);
+ return;
+ }
+ s->num_irq += GICV3_BASE_IRQ;
+ if (s->num_irq > GICV3_MAXIRQ) {
+ error_setg(errp,
+ "requested %u interrupt lines exceeds GIC maximum %d",
+ num_irq, GICV3_MAXIRQ);
+ return;
+ }
+ /* ITLinesNumber is represented as (N / 32) - 1 (see
+ * gic_dist_readb) so this is an implementation imposed
+ * restriction, not an architectural one:
+ */
+ if (s->num_irq < 32 || (s->num_irq % 32)) {
+ error_setg(errp,
+ "%d interrupt lines unsupported: not divisible by 32",
+ num_irq);
+ return;
+ }
+}
+
+static void arm_gicv3_common_reset(DeviceState *dev)
+{
+ GICv3State *s = ARM_GICV3_COMMON(dev);
+ int i;
+
+ /* Note num_cpu and num_irq are properties */
+
+ /* Don't reset anything assigned in arm_gic_realize or any property */
+
+ /* No GICv2 backwards computability support */
+ for (i = 0; i < s->num_cpu; i++) {
+ s->priority_mask[i] = 0;
+ s->current_pending[i] = 1023;
+ s->running_irq[i] = 1023;
+ s->running_priority[i] = 0x100;
+ s->cpu_ctlr[i] = 0;
+ }
+
+ memset(s->irq_state, 0, sizeof(s->irq_state));
+ /* GIC-500 comment 'j' SGI are always enabled */
+ for (i = 0; i < GIC_NR_SGIS; i++) {
+ GIC_SET_ENABLED(i, ALL_CPU_MASK);
+ GIC_SET_EDGE_TRIGGER(i);
+ }
+ memset(s->sgi_state, 0, sizeof(s->sgi_state));
+ memset(s->irq_target, 0, sizeof(s->irq_target));
+ if (s->num_cpu == 1) {
+ /* For uniprocessor GICs all interrupts always target the sole CPU */
+ for (i = 0; i < GICV3_MAXIRQ; i++) {
+ s->irq_target[i] = 1;
+ }
+ }
+ memset(s->priority1, 0, sizeof(s->priority1));
+ memset(s->priority2, 0, sizeof(s->priority2));
+ memset(s->last_active, 0, sizeof(s->last_active));
+
+ /* With all configuration we don't support GICv2 backwards computability */
+ if (s->security_levels > 1) {
+ /* GICv3 5.3.20 With two security So DS is RAZ/WI ARE_NS is RAO/WI
+ * and ARE_S is RAO/WI
+ */
+ s->ctlr = GICD_CTLR_ARE_S | GICD_CTLR_ARE_NS;
+ } else {
+ /* GICv3 5.3.20 With one security So DS is RAO/WI ARE is RAO/WI
+ */
+ s->ctlr = GICD_CTLR_DS | GICD_CTLR_ARE;
+ }
+ /* Workaround!
+ * Linux (drivers/irqchip/irq-gic-v3.c) is enabling only group one,
+ * in gic_cpu_sys_reg_init it calls gic_write_grpen1(1);
+ * but it doesn't conigure any interrupt to be in group one
+ */
+ for (i = 0; i < s->num_irq; i++) {
+ GIC_SET_GROUP(i, ALL_CPU_MASK);
+ }
+}
+
+static Property arm_gicv3_common_properties[] = {
+ DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
+ DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
+ DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
+ /* How many security levels are supported */
+ DEFINE_PROP_BOOL("security-levels", GICv3State, security_levels, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void arm_gicv3_common_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = arm_gicv3_common_reset;
+ dc->realize = arm_gicv3_common_realize;
+ dc->props = arm_gicv3_common_properties;
+ dc->vmsd = &vmstate_gicv3;
+}
+
+static const TypeInfo arm_gicv3_common_type = {
+ .name = TYPE_ARM_GICV3_COMMON,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(GICv3State),
+ .class_size = sizeof(ARMGICv3CommonClass),
+ .class_init = arm_gicv3_common_class_init,
+ .abstract = true,
+};
+
+static void register_types(void)
+{
+ type_register_static(&arm_gicv3_common_type);
+}
+
+type_init(register_types)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
new file mode 100644
index 0000000..589baca
--- /dev/null
+++ b/hw/intc/gicv3_internal.h
@@ -0,0 +1,156 @@
+/*
+ * ARM GIC support - internal interfaces
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Copyright (c) 2015 Huawei.
+ * Written by Peter Maydell
+ * Extended to 64 cores by Shlomo Pongratz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QEMU_ARM_GICV3_INTERNAL_H
+#define QEMU_ARM_GICV3_INTERNAL_H
+
+#include "hw/intc/arm_gicv3_common.h"
+
+#define ALL_CPU_MASK ((uint64_t) (0xffffffffffffffff))
+
+/* Keep this macro so it will be easy to compare the code to GICv2 code.
+ * The compiler will optimize any +/- operation involving this macro
+ */
+#define GICV3_BASE_IRQ (0)
+
+#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
+#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
+#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
+#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
+#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
+#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
+#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
+#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
+#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
+#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level |= (cm)
+#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
+#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
+#define GIC_SET_EDGE_TRIGGER(irq) s->irq_state[irq].edge_trigger = true
+#define GIC_CLEAR_EDGE_TRIGGER(irq) s->irq_state[irq].edge_trigger = false
+#define GIC_TEST_EDGE_TRIGGER(irq) (s->irq_state[irq].edge_trigger)
+#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
+ s->priority1[irq][cpu] : \
+ s->priority2[(irq) - GIC_INTERNAL])
+#define GIC_TARGET(irq) s->irq_target[irq]
+#define GIC_CLEAR_GROUP(irq, cm) (s->irq_state[irq].group &= ~(cm))
+#define GIC_SET_GROUP(irq, cm) (s->irq_state[irq].group |= (cm))
+#define GIC_TEST_GROUP(irq, cm) ((s->irq_state[irq].group & (cm)) != 0)
+
+static inline bool gic_test_pending(GICv3State *s, int irq, uint64_t cm)
+{
+ /* Edge-triggered interrupts are marked pending on a rising edge, but
+ * level-triggered interrupts are either considered pending when the
+ * level is active or if software has explicitly written to
+ * GICD_ISPENDR to set the state pending.
+ */
+ return (s->irq_state[irq].pending & cm) ||
+ (!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_LEVEL(irq, cm));
+}
+
+#define GICD_CTLR 0x0000
+#define GICD_TYPER 0x0004
+#define GICD_IIDR 0x0008
+#define GICD_STATUSR 0x0010
+#define GICD_SETSPI_NSR 0x0040
+#define GICD_CLRSPI_NSR 0x0048
+#define GICD_SETSPI_SR 0x0050
+#define GICD_CLRSPI_SR 0x0058
+#define GICD_SEIR 0x0068
+#define GICD_ISENABLER 0x0100
+#define GICD_ICENABLER 0x0180
+#define GICD_ISPENDR 0x0200
+#define GICD_ICPENDR 0x0280
+#define GICD_ISACTIVER 0x0300
+#define GICD_ICACTIVER 0x0380
+#define GICD_IPRIORITYR 0x0400
+#define GICD_ICFGR 0x0C00
+#define GICD_IROUTER 0x6000
+#define GICD_PIDR2 0xFFE8
+
+/* GICD_CTLR fields */
+#define GICD_CTLR_EN_GRP0 (1U << 0)
+#define GICD_CTLR_EN_GRP1NS (1U << 1) /* GICv3 5.3.20 */
+#define GICD_CTLR_EN_GRP1S (1U << 2)
+#define GICD_CTLR_EN_GRP1_ALL (GICD_CTLR_EN_GRP1NS | GICD_CTLR_EN_GRP1S)
+#define GICD_CTLR_ARE (1U << 4)
+#define GICD_CTLR_ARE_S (1U << 4)
+#define GICD_CTLR_ARE_NS (1U << 5)
+#define GICD_CTLR_DS (1U << 6)
+#define GICD_CTLR_RWP (1U << 31)
+
+#define GICD_IROUTER_SPI_MODE_ONE (0U << 31)
+#define GICD_IROUTER_SPI_MODE_ANY (1U << 31)
+
+#define GIC_PIDR2_ARCH_MASK 0xf0
+#define GIC_PIDR2_ARCH_GICv3 0x30
+#define GIC_PIDR2_ARCH_GICv4 0x40
+
+/*
+ * Re-Distributor registers, offsets from RD_base
+ */
+#define GICR_CTLR GICD_CTLR
+#define GICR_IIDR 0x0004
+#define GICR_TYPER 0x0008
+#define GICR_STATUSR GICD_STATUSR
+#define GICR_WAKER 0x0014
+#define GICR_SETLPIR 0x0040
+#define GICR_CLRLPIR 0x0048
+#define GICR_SEIR GICD_SEIR
+#define GICR_PROPBASER 0x0070
+#define GICR_PENDBASER 0x0078
+#define GICR_INVLPIR 0x00A0
+#define GICR_INVALLR 0x00B0
+#define GICR_SYNCR 0x00C0
+#define GICR_MOVLPIR 0x0100
+#define GICR_MOVALLR 0x0110
+#define GICR_PIDR2 GICD_PIDR2
+
+#define GICR_WAKER_ProcessorSleep (1U << 1)
+#define GICR_WAKER_ChildrenAsleep (1U << 2)
+
+/*
+ * Re-Distributor registers, offsets from SGI_base
+ */
+#define GICR_ISENABLER0 GICD_ISENABLER
+#define GICR_ICENABLER0 GICD_ICENABLER
+#define GICR_ISPENDR0 GICD_ISPENDR
+#define GICR_ICPENDR0 GICD_ICPENDR
+#define GICR_ISACTIVER0 GICD_ISACTIVER
+#define GICR_ICACTIVER0 GICD_ICACTIVER
+#define GICR_IPRIORITYR0 GICD_IPRIORITYR
+#define GICR_ICFGR0 GICD_ICFGR
+
+#define GICR_TYPER_VLPIS (1U << 1)
+#define GICR_TYPER_LAST (1U << 4)
+
+/*
+ * Simulated used system registers
+ */
+#define GICC_CTLR_EN_GRP0 (1U << 0)
+#define GICC_CTLR_EN_GRP1 (1U << 1)
+#define GICC_CTLR_ACK_CTL (1U << 2)
+#define GICC_CTLR_FIQ_EN (1U << 3)
+#define GICC_CTLR_CBPR (1U << 4) /* GICv1: SBPR */
+#define GICC_CTLR_EOIMODE (1U << 9)
+#define GICC_CTLR_EOIMODE_NS (1U << 10)
+
+#endif /* !QEMU_ARM_GIC_INTERNAL_H */
diff --git a/include/hw/intc/arm_gicv3_common.h
b/include/hw/intc/arm_gicv3_common.h
new file mode 100644
index 0000000..c8cc24e
--- /dev/null
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -0,0 +1,112 @@
+/*
+ * ARM GIC support
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Copyright (c) 2015 Huawei.
+ * Written by Peter Maydell
+ * Extended to 64 cores by Shlomo Pongratz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_ARM_GICV3_COMMON_H
+#define HW_ARM_GICV3_COMMON_H
+
+#include "hw/sysbus.h"
+#include "hw/intc/arm_gic_common.h"
+
+/* Maximum number of possible interrupts, determined by the GIC architecture */
+#define GICV3_MAXIRQ 1020
+#define GICV3_NCPU 64
+
+typedef struct gicv3_irq_state {
+ /* The enable bits are only banked for per-cpu interrupts. */
+ uint64_t enabled;
+ uint64_t pending;
+ uint64_t active;
+ uint64_t level;
+ uint64_t group;
+ bool edge_trigger; /* true: edge-triggered, false: level-triggered */
+} gicv3_irq_state;
+
+typedef struct gicv3_sgi_state {
+ uint64_t pending[GICV3_NCPU];
+} gicv3_sgi_state;
+
+typedef struct GICv3State {
+ /*< private >*/
+ SysBusDevice parent_obj;
+ /*< public >*/
+
+ qemu_irq parent_irq[GICV3_NCPU];
+ qemu_irq parent_fiq[GICV3_NCPU];
+ /* GICD_CTLR; for a GIC with the security extensions the NS banked version
+ * of this register is just an alias of bit 1 of the S banked version.
+ */
+ uint32_t ctlr;
+ /* Sim GICC_CTLR; again, the NS banked version is just aliases of bits of
+ * the S banked register, so our state only needs to store the S version.
+ */
+ uint32_t cpu_ctlr[GICV3_NCPU];
+ bool cpu_enabled[GICV3_NCPU];
+
+ gicv3_irq_state irq_state[GICV3_MAXIRQ];
+ uint64_t irq_target[GICV3_MAXIRQ];
+ uint8_t priority1[GIC_INTERNAL][GICV3_NCPU];
+ uint8_t priority2[GICV3_MAXIRQ - GIC_INTERNAL];
+ uint16_t last_active[GICV3_MAXIRQ][GICV3_NCPU];
+ /* For each SGI on the target CPU, we store 64 bits
+ * indicating which source CPUs have made this SGI
+ * pending on the target CPU. These correspond to
+ * the bytes in the GIC_SPENDSGIR* registers as
+ * read by the target CPU.
+ */
+ gicv3_sgi_state sgi_state[GIC_NR_SGIS];
+
+ uint16_t priority_mask[GICV3_NCPU];
+ uint16_t running_irq[GICV3_NCPU];
+ uint16_t running_priority[GICV3_NCPU];
+ uint16_t current_pending[GICV3_NCPU];
+
+ uint32_t cpu_mask; /* For redistributor */
+ uint32_t num_cpu;
+ MemoryRegion iomem_dist; /* Distributor */
+ MemoryRegion iomem_lpi; /* Redistributor */
+ uint32_t num_irq;
+ uint32_t revision;
+ bool security_levels;
+ int dev_fd; /* kvm device fd if backed by kvm vgic support */
+} GICv3State;
+
+#define TYPE_ARM_GICV3_COMMON "arm_gicv3_common"
+#define ARM_GICV3_COMMON(obj) \
+ OBJECT_CHECK(GICv3State, (obj), TYPE_ARM_GICV3_COMMON)
+#define ARM_GICV3_COMMON_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMGICv3CommonClass, (klass), TYPE_ARM_GICV3_COMMON)
+#define ARM_GICV3_COMMON_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMGICv3CommonClass, (obj), TYPE_ARM_GICV3_COMMON)
+
+typedef struct ARMGICv3CommonClass {
+ /*< private >*/
+ SysBusDeviceClass parent_class;
+ /*< public >*/
+
+ void (*pre_save)(GICv3State *s);
+ void (*post_load)(GICv3State *s);
+} ARMGICv3CommonClass;
+
+void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops);
+
+#endif
--
1.9.5.msysgit.0
- Re: [Qemu-devel] [PATCH v7 5/6] Initial implementation of vGICv3, (continued)
[Qemu-devel] [PATCH v7 1/6] Merge memory_region_init_reservation() into memory_region_init_io(), Pavel Fedin, 2015/07/24
[Qemu-devel] [PATCH v7 6/6] Add gicversion option to virt machine, Pavel Fedin, 2015/07/24
[Qemu-devel] [PATCH v7 4/6] Introduce irqchip type specification for KVM, Pavel Fedin, 2015/07/24
[Qemu-devel] [PATCH v7 2/6] Implement GIC-500 base class,
Pavel Fedin <=
[Qemu-devel] [PATCH v7 3/6] Extract some reusable vGIC code, Pavel Fedin, 2015/07/24