[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] linux-user: add name_to_handle_at/open_by_handle_at
From: |
Laurent Vivier |
Subject: |
[Qemu-devel] [PATCH] linux-user: add name_to_handle_at/open_by_handle_at |
Date: |
Fri, 28 Aug 2015 00:27:34 +0200 |
This patch allows to run example given by open_by_handle_at(2):
The following shell session demonstrates the use of these two programs:
$ echo 'Can you please think about it?' > cecilia.txt
$ ./t_name_to_handle_at cecilia.txt > fh
$ ./t_open_by_handle_at < fh
open_by_handle_at: Operation not permitted
$ sudo ./t_open_by_handle_at < fh # Need CAP_SYS_ADMIN
Read 31 bytes
$ rm cecilia.txt
Now we delete and (quickly) re-create the file so that it has the same
content and (by chance) the same inode.[...]
$ stat --printf="%i\n" cecilia.txt # Display inode number
4072121
$ rm cecilia.txt
$ echo 'Can you please think about it?' > cecilia.txt
$ stat --printf="%i\n" cecilia.txt # Check inode number
4072121
$ sudo ./t_open_by_handle_at < fh
open_by_handle_at: Stale NFS file handle
See the man page for source code.
Signed-off-by: Laurent Vivier <address@hidden>
---
linux-user/syscall.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index f62c698..725ed66 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -5246,6 +5246,93 @@ static int do_futex(target_ulong uaddr, int op, int val,
target_ulong timeout,
return -TARGET_ENOSYS;
}
}
+#if defined(TARGET_NR_name_to_handle_at) && defined(CONFIG_OPEN_BY_HANDLE)
+static abi_long do_name_to_handle_at(abi_long arg1, abi_long arg2,
+ abi_long arg3, abi_long arg4,
+ abi_long arg5)
+{
+ struct file_handle *target_fh;
+ struct file_handle *fh;
+ int mount_id = 0;
+ abi_long ret;
+ char *name;
+ unsigned int size;
+
+ if (get_user_s32(size, arg3)) {
+ return -TARGET_EFAULT;
+ }
+
+ name = lock_user_string(arg2);
+ if (!name) {
+ return -TARGET_EFAULT;
+ }
+
+ target_fh = lock_user(VERIFY_WRITE, arg3,
+ sizeof(struct file_handle) + size, 0);
+ if (!target_fh) {
+ unlock_user(name, arg2, 0);
+ return -TARGET_EFAULT;
+ }
+
+ fh = g_malloc0(sizeof(struct file_handle) + size);
+ fh->handle_bytes = size;
+
+ ret = get_errno(name_to_handle_at(arg1, path(name), fh, &mount_id, arg5));
+ unlock_user(name, arg2, 0);
+
+ /* man name_to_handle_at(2):
+ * Other than the use of the handle_bytes field, the caller should treat
+ * the file_handle structure as an opaque data type
+ */
+
+ memcpy(target_fh, fh, fh->handle_bytes);
+ target_fh->handle_bytes = tswap32(fh->handle_bytes);
+ g_free(fh);
+ unlock_user(target_fh, arg3, size);
+
+ if (put_user_s32(mount_id, arg4)) {
+ return -TARGET_EFAULT;
+ }
+
+ return ret;
+
+}
+#endif
+
+#if defined(TARGET_NR_open_by_handle_at) && defined(CONFIG_OPEN_BY_HANDLE)
+static abi_long do_open_by_handle_at(abi_long arg1, abi_long arg2,
+ abi_long arg3)
+{
+ struct file_handle *target_fh;
+ struct file_handle *fh;
+ unsigned int size;
+ abi_long ret;
+
+ if (get_user_s32(size, arg2)) {
+ return -TARGET_EFAULT;
+ }
+
+ target_fh = lock_user(VERIFY_READ, arg2,
+ sizeof(struct file_handle) + size, 1);
+ if (!target_fh) {
+ return -TARGET_EFAULT;
+ }
+
+ fh = g_malloc0(sizeof(struct file_handle) + size);
+ memcpy(fh, target_fh, size);
+ fh->handle_bytes = size;
+ fh->handle_type = tswap32(target_fh->handle_type);
+
+ ret = get_errno(open_by_handle_at(arg1, fh,
+ target_to_host_bitmask(arg3, fcntl_flags_tbl)));
+
+ g_free(fh);
+
+ unlock_user(target_fh, arg2, sizeof(struct file_handle) + size);
+
+ return ret;
+}
+#endif
/* Map host to target signal numbers for the wait family of syscalls.
Assume all other status bits are the same. */
@@ -5655,6 +5742,16 @@ abi_long do_syscall(void *cpu_env, int num, abi_long
arg1,
arg4));
unlock_user(p, arg2, 0);
break;
+#if defined(TARGET_NR_name_to_handle_at) && defined(CONFIG_OPEN_BY_HANDLE)
+ case TARGET_NR_name_to_handle_at:
+ ret = do_name_to_handle_at(arg1, arg2, arg3, arg4, arg5);
+ break;
+#endif
+#if defined(TARGET_NR_open_by_handle_at) && defined(CONFIG_OPEN_BY_HANDLE)
+ case TARGET_NR_open_by_handle_at:
+ ret = do_open_by_handle_at(arg1, arg2, arg3);
+ break;
+#endif
case TARGET_NR_close:
ret = get_errno(close(arg1));
break;
--
2.4.3
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [PATCH] linux-user: add name_to_handle_at/open_by_handle_at,
Laurent Vivier <=