[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is sup
From: |
Alex Williamson |
Subject: |
Re: [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is support or not |
Date: |
Wed, 11 Nov 2015 13:53:52 -0700 |
On Wed, 2015-11-11 at 18:34 +0800, Cao jin wrote:
> From: Chen Fan <address@hidden>
>
> when init vfio devices done, we should test all the devices supported
> aer whether conflict with others. For each one, get the hot reset
> info for the affected device list. For each affected device, all
> should attach to the VM and on/below the same bus. also, we should test
> all of the non-AER supporting vfio-pci devices on or below the target
> bus to verify they have a reset mechanism.
>
> Signed-off-by: Chen Fan <address@hidden>
> ---
> hw/vfio/pci.c | 210
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> hw/vfio/pci.h | 1 +
> 2 files changed, 204 insertions(+), 7 deletions(-)
>
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 2d34edf..31ffd44 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -1806,6 +1806,190 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev,
> uint8_t pos)
> return 0;
> }
>
> +static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
> + PCIHostDeviceAddress *host2)
> +{
> + return (host1->domain == host2->domain && host1->bus == host2->bus &&
> + host1->slot == host2->slot && host1->function ==
> host2->function);
> +}
> +
> +struct VFIODeviceFind {
> + PCIDevice *pdev;
> + bool found;
> +};
> +
> +static void vfio_check_device_noreset(PCIBus *bus, PCIDevice *pdev,
> + void *opaque)
> +{
> + DeviceState *dev = DEVICE(pdev);
> + DeviceClass *dc = DEVICE_GET_CLASS(dev);
> + VFIOPCIDevice *vdev;
> + struct VFIODeviceFind *find = opaque;
> +
> + if (find->found) {
> + return;
> + }
> +
> + if (!object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
> + if (!dc->reset) {
> + goto found;
> + }
> + return;
> + }
> + vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> + if (!(vdev->features & VFIO_FEATURE_ENABLE_AER) &&
> + !vdev->vbasedev.reset_works) {
> + goto found;
> + }
> +
> + return;
> +found:
> + find->pdev = pdev;
> + find->found = true;
> +}
> +
> +static void device_find(PCIBus *bus, PCIDevice *pdev, void *opaque)
> +{
> + struct VFIODeviceFind *find = opaque;
> +
> + if (find->found) {
> + return;
> + }
> +
> + if (pdev == find->pdev) {
> + find->found = true;
> + }
> +}
> +
> +static int vfio_check_host_bus_reset(VFIOPCIDevice *vdev)
> +{
> + PCIBus *bus = vdev->pdev.bus;
> + struct vfio_pci_hot_reset_info *info = NULL;
> + struct vfio_pci_dependent_device *devices;
> + VFIOGroup *group;
> + struct VFIODeviceFind find;
> + int ret, i;
> +
> + ret = vfio_get_hot_reset_info(vdev, &info);
> + if (ret) {
> + error_report("vfio: Cannot get hot reset info");
This needs a more useful error message:
- error_report("vfio: Cannot get hot reset info");
+ error_report("vfio: Cannot enable AER for device %s, "
+ "device does not support hot reset." vdev->vbasedev.name);
> + goto out;
> + }
> +
> + /* List all affected devices by bus reset */
> + devices = &info->devices[0];
> +
> + /* Verify that we have all the groups required */
> + for (i = 0; i < info->count; i++) {
> + PCIHostDeviceAddress host;
> + VFIOPCIDevice *tmp;
> + VFIODevice *vbasedev_iter;
> + bool found = false;
> +
> + host.domain = devices[i].segment;
> + host.bus = devices[i].bus;
> + host.slot = PCI_SLOT(devices[i].devfn);
> + host.function = PCI_FUNC(devices[i].devfn);
> +
> + /* Skip the current device */
> + if (vfio_pci_host_match(&host, &vdev->host)) {
> + continue;
> + }
> +
> + /* Ensure we own the group of the affected device */
> + QLIST_FOREACH(group, &vfio_group_list, next) {
> + if (group->groupid == devices[i].group_id) {
> + break;
> + }
> + }
> +
> + if (!group) {
> + error_report("vfio: Cannot enable AER for device %s, "
> + "depends on group %d which is not owned.",
> + vdev->vbasedev.name, devices[i].group_id);
> + ret = -1;
> + goto out;
> + }
> +
> + /* Ensure affected devices for reset on/blow the bus */
> + QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
> + if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
> + continue;
> + }
> + tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
> + if (vfio_pci_host_match(&host, &tmp->host)) {
> + PCIDevice *pci = PCI_DEVICE(tmp);
> +
> + find.pdev = pci;
> + find.found = false;
> + pci_for_each_device(bus, pci_bus_num(bus),
> + device_find, &find);
> + if (!find.found) {
> + error_report("vfio: Cannot enable AER for device %s, "
> + "the dependent device %s is not under the
> same bus",
> + vdev->vbasedev.name, tmp->vbasedev.name);
> + ret = -1;
> + goto out;
> + }
> + found = true;
> + break;
> + }
> + }
> +
> + /* Ensure all affected devices assigned to VM */
> + if (!found) {
> + error_report("vfio: Cannot enable AER for device %s, "
> + "the dependent device %04x:%02x:%02x.%x "
> + "is not assigned to VM.",
> + vdev->vbasedev.name, host.domain, host.bus,
> + host.slot, host.function);
> + ret = -1;
> + goto out;
> + }
> + }
> +
> + /*
> + * Check the all pci devices on or below the target bus
> + * have a reset mechanism at least.
> + */
> + find.pdev = NULL;
> + find.found = false;
> + pci_for_each_device(bus, pci_bus_num(bus),
> + vfio_check_device_noreset, &find);
> + if (find.found) {
> + error_report("vfio: Cannot enable AER for device %s, "
> + "the affected device %s have not a reset mechanism.",
s/have not/does not have/
> + vdev->vbasedev.name, find.pdev->name);
> + ret = -1;
> + goto out;
> + }
> +
> + ret = 0;
> +out:
> + g_free(info);
> + return ret;
> +}
> +
> +static int vfio_check_devices_host_bus_reset(void)
> +{
> + VFIOGroup *group;
> + VFIODevice *vbasedev;
> + VFIOPCIDevice *vdev;
> +
> + /* Check All vfio-pci devices if have bus reset capability */
> + QLIST_FOREACH(group, &vfio_group_list, next) {
> + QLIST_FOREACH(vbasedev, &group->device_list, next) {
Missing a test for vfio-pci device:
+ if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
+ continue;
+ }
> + vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> + if ((vdev->features & VFIO_FEATURE_ENABLE_AER) &&
> + vfio_check_host_bus_reset(vdev)) {
> + return -1;
> + }
> + }
> + }
> +
Thanks,
Alex
- Re: [Qemu-devel] [PATCH v13 07/13] vfio: add aer support for vfio device, (continued)
- [Qemu-devel] [PATCH v13 05/13] vfio: add pcie extanded capability support, Cao jin, 2015/11/11
- [Qemu-devel] [PATCH v13 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Cao jin, 2015/11/11
- [Qemu-devel] [PATCH v13 09/13] add check reset mechanism when hotplug vfio device, Cao jin, 2015/11/11
- [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is support or not, Cao jin, 2015/11/11
- Re: [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is support or not,
Alex Williamson <=
- [Qemu-devel] [PATCH v13 12/13] vfio-pci: pass the aer error to guest, Cao jin, 2015/11/11
- [Qemu-devel] [PATCH v13 13/13] vfio: add 'aer' property to expose aercap, Cao jin, 2015/11/11
- [Qemu-devel] [PATCH v13 11/13] pcie_aer: expose pcie_aer_msg() interface, Cao jin, 2015/11/11