[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 0/9] e1000: Various fixes and registers' impl
From: |
Leonid Bloch |
Subject: |
Re: [Qemu-devel] [PATCH v6 0/9] e1000: Various fixes and registers' implementation |
Date: |
Thu, 12 Nov 2015 11:45:39 +0200 |
On Thu, Nov 12, 2015 at 10:16 AM, Jason Wang <address@hidden> wrote:
>
>
> On 11/11/2015 09:52 PM, Leonid Bloch wrote:
>> This series fixes issues with packet/octet counting in e1000's Statistic
>> registers, fixes a bug in the packet address filtering procedure, and
>> implements many MAC registers that were absent before, some Statistic
>> counters among them.
>>
>> Besides this, the series introduces a parameter which, if set to "on"
>> (default), will cause the entire MAC registers' array to migrate during
>> live migration (please see patches #2 and #9 for details). The rational
>> behind this is the ability to implement additional MAC registers in the
>> future, without worrying about migration compatibility between future
>> versions. For compatibility with previous versions, the above mentioned
>> parameter can be set to "off".
>>
>> Also, a new array is introduced to control the access to the various MAC
>> registers. This takes care of situations when a MAC register requires a
>> certain parameter to be accessed, or is partially implemented, and
>> requires a debug warning to be printed on access attempts.
>>
>> Additionally, several cosmetic changes are made.
>>
>> Differences v1-2:
>> --------------------
>> * Wording of several commit messages corrected.
>> * For trivially implemented Diagnostic registers, a debug message is
>> added on read/write attempts, alerting of incomplete implementation.
>> * Following testing on a physical device, only the lower 16 bits can now
>> be read from AIT, and only the lower 4 - from FFMT*.
>> * The grow_8reg_if_not_full function is rewritten.
>> * inc_tx_bcast_or_mcast_count and increase_size_stats are now called
>> from within e1000_send_packet, to avoid code duplication.
>>
>> Differences v2-3:
>> --------------------
>> * Minor rewordings of some commit messages (0002, 0003).
>> * Live migration capability is added to the newly implemented registers.
>>
>> Differences v3-4:
>> --------------------
>> * Introduction of the "full_mac_registers" parameter (see above).
>> * Reversion of the live migration handling introduced in v3.
>> * Small alignment changes in patch #1 to correspond with the following
>> patches.
>>
>> Differences v4-v5:
>> --------------------
>> * Introduction of an array to control the access to the MAC registers.
>> * Removal of the specific functions that warned of partial
>> implementation on read/write from patch 4.
>> * Adequate changes to patches 4 and 8: mainly adding the registers
>> introduced there to the new array.
>>
>> Differences v5-v6:
>> --------------------
>> * The access control array now does not contain an "always accessible"
>> bit. The assumption that a register is always accessible is based now
>> solely on the facts that it has a read or write handler, and it does
>> not require a flag to be set. That also makes place for 6 possible
>> flag bits in the access control array, instead of 5 in v5.
>> * The support for backward compatibility, nor the new registers
>> introduced in this series, can not be turned on now until the last
>> patch in this series is applied. This is done to preserve
>> compatibility if bisection in-between the patches of this series will
>> be needed.
>>
>> The majority of these changes result from Jason Wang's review - thank
>> you, Jason!
>
> Applied in https://github.com/jasowang/qemu/commits/net with a minor
> modification:
>
> - Move the compat property from patch 3 to patch 9
>
> Thanks
Jason, thanks for your review! It was very helpful!
>
>>
>> Leonid Bloch (9):
>> e1000: Cosmetic and alignment fixes
>> e1000: Add support for migrating the entire MAC registers' array
>> e1000: Introduced an array to control the access to the MAC registers
>> e1000: Trivial implementation of various MAC registers
>> e1000: Fixing the received/transmitted packets' counters
>> e1000: Fixing the received/transmitted octets' counters
>> e1000: Fixing the packet address filtering procedure
>> e1000: Implementing various counters
>> e1000: Introducing backward compatibility command line parameter
>>
>> hw/net/e1000.c | 476
>> ++++++++++++++++++++++++++++++++++++++++------------
>> hw/net/e1000_regs.h | 8 +-
>> include/hw/compat.h | 4 +
>> 3 files changed, 379 insertions(+), 109 deletions(-)
>>
>
- [Qemu-devel] [PATCH v6 3/9] e1000: Introduced an array to control the access to the MAC registers, (continued)
- [Qemu-devel] [PATCH v6 3/9] e1000: Introduced an array to control the access to the MAC registers, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 1/9] e1000: Cosmetic and alignment fixes, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 5/9] e1000: Fixing the received/transmitted packets' counters, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 6/9] e1000: Fixing the received/transmitted octets' counters, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 4/9] e1000: Trivial implementation of various MAC registers, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 7/9] e1000: Fixing the packet address filtering procedure, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 9/9] e1000: Introducing backward compatibility command line parameter, Leonid Bloch, 2015/11/11
- [Qemu-devel] [PATCH v6 8/9] e1000: Implementing various counters, Leonid Bloch, 2015/11/11
- Re: [Qemu-devel] [PATCH v6 0/9] e1000: Various fixes and registers' implementation, Jason Wang, 2015/11/12