[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm
From: |
Gabriel L. Somlo |
Subject: |
[Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm |
Date: |
Fri, 13 Nov 2015 21:57:13 -0500 |
New since v4:
- rebased on top of Marc's DMA series
- drop machine compat dependency for insertion into x86/ssdt
(patch 3/5), following agreement between Igor and Eduardo
- [mm]io register range now covers DMA register as well, if
available.
- s/bios/firmware in doc file updates
Thanks,
--Gabriel
>New since v3:
>
> - rebased to work on top of 87e896ab (introducing pc-*-25 classes),
> inserting fw_cfg acpi node only for machines >= 2.5.
>
> - reintroduce _STA with value 0x0B (bit 2 for u/i visibility turned
> off to avoid Windows complaining -- thanks Igor for catching that!)
>
>If there's any other feedback besides questions regarding the
>appropriateness of "QEMU0002" as the value of _HID, please don't hesitate!
>
>>New since v2:
>>
>> - pc/i386 node in ssdt only on machine types *newer* than 2.4
>> (as suggested by Eduardo)
>>
>>I appreciate any further comments and reviews. Hopefully we can make
>>this palatable for upstream, modulo the lingering concerns about whether
>>"QEMU0002" is ok to use as the value of _HID, which I'll hopefully get
>>sorted out with the kernel crew...
>>
>>>New since v1:
>>>
>>> - expose control register size (suggested by Marc MarĂ)
>>>
>>> - leaving out _UID and _STA fields (thanks Shannon & Igor)
>>>
>>> - using "QEMU0002" as the value of _HID (thanks Michael)
>>>
>>> - added documentation blurb to docs/specs/fw_cfg.txt
>>> (mainly to record usage of the "QEMU0002" string with fw_cfg).
>>>
>>>> This series adds a fw_cfg device node to the SSDT (on pc), or to the
>>>> DSDT (on arm).
>>>>
>>>> - Patch 1/3 moves (and renames) the BIOS_CFG_IOPORT (0x510)
>>>> define from pc.c to pc.h, so that it could be used from
>>>> acpi-build.c in patch 2/3.
>>>>
>>>> - Patch 2/3 adds a fw_cfg node to the pc SSDT.
>>>>
>>>> - Patch 3/3 adds a fw_cfg node to the arm DSDT.
>>>>
>>>> I made up some names - "FWCF" for the node name, and "FWCF0001"
>>>> for _HID; no idea whether that's appropriate, or how else I should
>>>> figure out what to use instead...
>>>>
>>>> Also, using scope "\\_SB", based on where fw_cfg shows up in the
>>>> output of "info qtree". Again, if that's wrong, please point me in
>>>> the right direction.
>>>>
>>>> Re. 3/3 (also mentioned after the commit blurb in the patch itself),
>>>> I noticed none of the other DSDT entries contain a _STA field, wondering
>>>> why it would (not) make sense to include that, same as on the PC.
Gabriel L. Somlo (5):
fw_cfg: expose control register size in fw_cfg.h
pc: fw_cfg: move ioport base constant to pc.h
acpi: pc: add fw_cfg device node to ssdt
acpi: arm: add fw_cfg device node to dsdt
fw_cfg: document ACPI device node information
docs/specs/fw_cfg.txt | 9 +++++++++
hw/arm/virt-acpi-build.c | 15 +++++++++++++++
hw/i386/acpi-build.c | 29 +++++++++++++++++++++++++++++
hw/i386/pc.c | 5 ++---
hw/nvram/fw_cfg.c | 4 +++-
include/hw/i386/pc.h | 2 ++
include/hw/nvram/fw_cfg.h | 3 +++
7 files changed, 63 insertions(+), 4 deletions(-)
--
2.4.3
- [Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm,
Gabriel L. Somlo <=
- [Qemu-devel] [PATCH v5 1/5] fw_cfg: expose control register size in fw_cfg.h, Gabriel L. Somlo, 2015/11/13
- [Qemu-devel] [PATCH v5 4/5] acpi: arm: add fw_cfg device node to dsdt, Gabriel L. Somlo, 2015/11/13
- [Qemu-devel] [PATCH v5 5/5] fw_cfg: document ACPI device node information, Gabriel L. Somlo, 2015/11/13
- [Qemu-devel] [PATCH v5 2/5] pc: fw_cfg: move ioport base constant to pc.h, Gabriel L. Somlo, 2015/11/13
- [Qemu-devel] [PATCH v5 3/5] acpi: pc: add fw_cfg device node to ssdt, Gabriel L. Somlo, 2015/11/13
- Re: [Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm, Marc MarĂ, 2015/11/14
- Re: [Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm, Gabriel L. Somlo, 2015/11/23