qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 1/1] blk: do not select PFLASH device for intern


From: Laszlo Ersek
Subject: Re: [Qemu-devel] [PATCH 1/1] blk: do not select PFLASH device for internal snapshot
Date: Wed, 13 Jan 2016 11:41:30 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.5.1

On 01/12/16 18:40, Markus Armbruster wrote:
> Kevin Wolf <address@hidden> writes:
> 
>> Am 12.01.2016 um 17:35 hat Denis V. Lunev geschrieben:
>>> On 01/12/2016 06:47 PM, Denis V. Lunev wrote:
>>>> On 01/12/2016 06:20 PM, Kevin Wolf wrote:
>>>>> Am 12.01.2016 um 15:59 hat Paolo Bonzini geschrieben:
>>>>>>
>>>>>> On 12/01/2016 15:16, Kevin Wolf wrote:
>>>>>>>> Thus we should avoid selection of "pflash" drives for VM
>>>>>>>> state saving.
>>>>>>>>
>>>>>>>> For now "pflash" is read-write raw image as it configured by libvirt.
>>>>>>>> Thus there are no such images in the field and we could
>>>>>>>> safely disable
>>>>>>>> ability to save state to those images inside QEMU.
>>>>>>> This is obviously broken. If you write to the pflash, then it needs to
>>>>>>> be snapshotted in order to keep a consistent state.
>>>>>>>
>>>>>>> If you want to avoid snapshotting the image, make it read-only and it
>>>>>>> will be skipped even today.
>>>>>> Sort of.  The point of having flash is to _not_ make it read-only, so
>>>>>> that is not a solution.
>>>>>>
>>>>>> Flash is already being snapshotted as part of saving RAM state.  In
>>>>>> fact, for this reason the device (at least the one used with OVMF; I
>>>>>> haven't checked other pflash devices) can simply save it back to disk
>>>>>> on the migration destination, without the need to use "migrate -b" or
>>>>>> shared storage.
>>>>>> [...]
>>>>>> I don't like very much using IF_PFLASH this way, which is why I hadn't
>>>>>> replied to the patch so far---I hadn't made up my mind about *what* to
>>>>>> suggest instead, or whether to just accept it.  However, it does work.
>>>>>>
>>>>>> Perhaps a separate "I know what I am doing" skip-snapshot option?  Or
>>>>>> a device callback saying "not snapshotting this is fine"?
>>>>> Boy, is this ugly...
>>>>>
>>>>> What do you do with disk-only snapshots? The recovery only works as long
>>>>> as you have VM state.
>>>>>
>>>>> Kevin
>>>> actually I am in a bit of trouble :(
>>>>
>>>> I understand that this is ugly, but I would like to make working
>>>> 'virsh snapshot' for OVFM VMs. This is necessary for us to make
>>>> a release.
>>>>
>>>> Currently libvirt guys generate XML in the following way:
>>>>
>>>>  <os>
>>>>    <type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type>
>>>>    <loader readonly='yes'
>>>> type='pflash'>/usr/share/OVMF/OVMF_CODE_new.fd</loader>
>>>> <nvram>/var/lib/libvirt/qemu/nvram/f20efi_VARS.fd</nvram>
>>>>  </os>
>>>>
>>>> This results in:
>>>>
>>>> qemu -drive 
>>>> file=/usr/share/OVMF/OVMF_CODE_new.fd,if=pflash,format=raw,unit=0,readonly=on
>>>> \
>>>>     -drive 
>>>> file=/var/lib/libvirt/qemu/nvram/f20efi_VARS.fd,if=pflash,format=raw,unit=1
>>>>
>>>> This obviously can not pass check in bdrv_all_can_snapshot()
>>>> as 'pflash' is RW and raw, i.e. can not be snapshoted.
>>>>
>>>> They have discussed the switch to the following command line:
>>>>
>>>> qemu -drive 
>>>> file=/usr/share/OVMF/OVMF_CODE_new.fd,if=pflash,format=raw,unit=0,readonly=on
>>>> \
>>>>     -drive 
>>>> file=/var/lib/libvirt/qemu/nvram/f20efi_VARS.fd.qcow2,if=pflash,format=qcow2,unit=1
>>>>
>>>> and say that in this case VM state could fall into PFLASH
>>>> drive which is should not be big as the location of the
>>>> file is different. This means that I am doomed here.
>>>>
>>>> Either we should force libvirt people to forget about their
>>>> opinion that pflash should be small which I am unable to
>>>> do or I should invent a way to ban VM state saving into
>>>> pflash.
>>>>
>>>> OK. There are 2 options.
>>>>
>>>> 1) Ban pflash as it was done.
>>>> 2) Add 'no-vmstate' flag to -drive (invented just now).
>>>>
>>> something like this:
>>>
>>> diff --git a/block.c b/block.c
>>> index 3e1877d..8900589 100644
>>> --- a/block.c
>>> +++ b/block.c
>>> @@ -881,6 +881,11 @@ static QemuOptsList bdrv_runtime_opts = {
>>>              .help = "Block driver to use for the node",
>>>          },
>>>          {
>>> +            .name = "novmstate",
>>> +            .type = QEMU_OPT_BOOL,
>>> +            .help = "Ignore for selecting to save VM state",
>>> +        },
>>> +        {
>>>              .name = BDRV_OPT_CACHE_WB,
>>>              .type = QEMU_OPT_BOOL,
>>>              .help = "Enable writeback mode",
>>> @@ -957,6 +962,7 @@ static int bdrv_open_common(BlockDriverState
>>> *bs, BdrvChild *file,
>>>      bs->request_alignment = 512;
>>>      bs->zero_beyond_eof = true;
>>>      bs->read_only = !(bs->open_flags & BDRV_O_RDWR);
>>> +    bs->disable_vmstate_save = qemu_opt_get_bool(opts, "novmstate", false);
>>>
>>>      if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
>>>          error_setg(errp,
>>> diff --git a/block/snapshot.c b/block/snapshot.c
>>> index 2d86b88..33cdd86 100644
>>> --- a/block/snapshot.c
>>> +++ b/block/snapshot.c
>>> @@ -483,6 +483,10 @@ BlockDriverState *bdrv_all_find_vmstate_bs(void)
>>>      while (not_found && (bs = bdrv_next(bs))) {
>>>          AioContext *ctx = bdrv_get_aio_context(bs);
>>>
>>> +        if (bs->disable_vmstate_save) {
>>> +            continue;
>>> +        }
>>> +
>>>          aio_context_acquire(ctx);
>>>          not_found = !bdrv_can_snapshot(bs);
>>>          aio_context_release(ctx);
>>> diff --git a/include/block/block_int.h b/include/block/block_int.h
>>> index 256609d..855a209 100644
>>> --- a/include/block/block_int.h
>>> +++ b/include/block/block_int.h
>>> @@ -438,6 +438,9 @@ struct BlockDriverState {
>>>      /* do we need to tell the quest if we have a volatile write cache? */
>>>      int enable_write_cache;
>>>
>>> +    /* skip this BDS searching for one to save VM state */
>>> +    bool disable_vmstate_save;
>>> +
>>>      /* the following member gives a name to every node on the bs graph. */
>>>      char node_name[32];
>>>      /* element of the list of named nodes building the graph */
>>
>> That sounds like an option. (No pun intended.)
>>
>> We can discuss the option name (perhaps "vmstate" defaulting to "on" is
>> better?) and variable names (I'd prefer them to match the option name);
>> also you'll need to extend the QAPI schema for blockdev-add. But all of
>> these are minor points and the idea seems sane.
> 
> I've always thought that QEMU picking the image to take the VM state is
> backwards.  Adding means to guide that pick like "don't pick this one,
> please" may help ease the pain, but it's still backwards.

I agree. This is the gist of the argument that you made last time too,
and I agreed then as well.

One piece of good illustration for why this is brittle is your
observation that just changing the order of drives (without any pflash
being present) breaks this as well. (Libvirt only gets away with that
because it also stashes the domain XML when a snapshot is made, and the
domain XML dictates the order of drive options.)

> The *user* should pick it.

I guess so.

Thanks!
Laszlo




reply via email to

[Prev in Thread] Current Thread [Next in Thread]