[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 17/17] iotests: Test that throttle values ranges
From: |
Kevin Wolf |
Subject: |
[Qemu-devel] [PULL 17/17] iotests: Test that throttle values ranges |
Date: |
Wed, 20 Jan 2016 17:25:06 +0100 |
From: Fam Zheng <address@hidden>
Signed-off-by: Fam Zheng <address@hidden>
Reviewed-by: Markus Armbruster <address@hidden>
Reviewed-by: Alberto Garcia <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
tests/qemu-iotests/051 | 18 ++++++++++++++++++
tests/qemu-iotests/051.out | 39 +++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/051.pc.out | 39 +++++++++++++++++++++++++++++++++++++++
3 files changed, 96 insertions(+)
diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
index d91f80b..7bfe9ff 100755
--- a/tests/qemu-iotests/051
+++ b/tests/qemu-iotests/051
@@ -263,6 +263,24 @@ run_qemu -drive
file="$TEST_IMG",iops_size=1234,throttling.iops-size=5678
run_qemu -drive file="$TEST_IMG",readonly=on,read-only=off
echo
+echo === Catching negative/large throttling values ===
+echo
+
+run_qemu -drive file="$TEST_IMG",iops=-1
+run_qemu -drive file="$TEST_IMG",bps=-2
+run_qemu -drive file="$TEST_IMG",bps_rd=-3
+run_qemu -drive file="$TEST_IMG",bps_rd_max=-3
+run_qemu -drive file="$TEST_IMG",throttling.iops-total=-4
+run_qemu -drive file="$TEST_IMG",throttling.bps-total=-5
+# These are accepted
+run_qemu -drive file="$TEST_IMG",bps=0
+run_qemu -drive file="$TEST_IMG",bps=1
+run_qemu -drive file="$TEST_IMG",bps=1000000000000000
+# While these are not
+run_qemu -drive file="$TEST_IMG",bps=1000000000000001
+run_qemu -drive file="$TEST_IMG",bps=9999999999999999
+
+echo
echo === Parsing protocol from file name ===
echo
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index bf886ce..0f8a8d3 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -285,6 +285,45 @@ Testing: -drive
file=TEST_DIR/t.qcow2,readonly=on,read-only=off
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only'
and its alias 'readonly' can't be used at the same time
+=== Catching negative/large throttling values ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be
within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be
within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be
within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values
must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max
values must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max
values must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=0
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max
values must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max
values must be within [0, 1000000000000000]
+
+
=== Parsing protocol from file name ===
Testing: -hda foo:bar
diff --git a/tests/qemu-iotests/051.pc.out b/tests/qemu-iotests/051.pc.out
index a5dfc33..85fc05d 100644
--- a/tests/qemu-iotests/051.pc.out
+++ b/tests/qemu-iotests/051.pc.out
@@ -379,6 +379,45 @@ Testing: -drive
file=TEST_DIR/t.qcow2,readonly=on,read-only=off
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only'
and its alias 'readonly' can't be used at the same time
+=== Catching negative/large throttling values ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be
within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be
within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be
within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values
must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max
values must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max
values must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=0
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max
values must be within [0, 1000000000000000]
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max
values must be within [0, 1000000000000000]
+
+
=== Parsing protocol from file name ===
Testing: -hda foo:bar
--
1.8.3.1
- [Qemu-devel] [PULL 08/17] block: Assert no write requests under BDRV_O_INCOMING, (continued)
- [Qemu-devel] [PULL 08/17] block: Assert no write requests under BDRV_O_INCOMING, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 04/17] qemu-iotests: Reduce racy output in 028, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 09/17] block: Fix error path in bdrv_invalidate_cache(), Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 06/17] qcow2: Write feature table only for v3 images, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 10/17] block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVE, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 13/17] qcow2: Fix BDRV_O_INACTIVE handling in qcow2_invalidate_cache(), Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 12/17] qcow2: Implement .bdrv_inactivate, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 15/17] vmdk: Create streamOptimized as version 3, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 14/17] qcow2: Make image inaccessible after failed qcow2_invalidate_cache(), Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 17/17] iotests: Test that throttle values ranges,
Kevin Wolf <=
- [Qemu-devel] [PULL 16/17] blockdev: Error out on negative throttling option values, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 05/17] block: Clean up includes, Kevin Wolf, 2016/01/20
- [Qemu-devel] [PULL 11/17] block: Inactivate BDS when migration completes, Kevin Wolf, 2016/01/20
- Re: [Qemu-devel] [PULL 00/17] Block patches, Peter Maydell, 2016/01/21