[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2] qemu-options.hx: Improve documentation of ch
From: |
Kashyap Chamarthy |
Subject: |
Re: [Qemu-devel] [PATCH v2] qemu-options.hx: Improve documentation of chardev multiplexing mode |
Date: |
Tue, 16 Feb 2016 20:44:21 +0100 |
User-agent: |
Mutt/1.5.23.1 (2014-03-12) |
On Tue, Feb 16, 2016 at 05:28:58PM +0000, Peter Maydell wrote:
> The current documentation of chardev mux=on is rather brief and opaque;
> expand it to hopefully be a bit more helpful.
>
> Signed-off-by: Peter Maydell <address@hidden>
> ---
> There was some discussion on #qemu yesterday evening about multiplexing,
> and "make the docs a bit less confusing" was one suggestion...
>
> v1->v2 changes:
> * include examples of the multiplexer use
> * mention that some other command options implicitly create a mux
> * link to the documentation of the mux's escape keys
> * fix up the documentation of mux escape keys so it can actually
> be linked to
> * drop the not-implemented "Ctrl-a ?" from the docs
> * improve the documentation of the mux keys a bit (in particular
> mentioning -echr, and being more generic than just "console/monitor")
>
> Our doc structure overall is pretty busted (why is all the documentation
> of generic stuff like -chardev lurking in "PC system emulation", for
> instance), so this is about as far as I want to go in cleaning up
> for now...
>
> qemu-doc.texi | 30 ++++++++++++++++++++----------
> qemu-options.hx | 45 +++++++++++++++++++++++++++++++++++++++++++--
> 2 files changed, 63 insertions(+), 12 deletions(-)
>
> diff --git a/qemu-doc.texi b/qemu-doc.texi
> index c324da8..bc9dd13 100644
> --- a/qemu-doc.texi
> +++ b/qemu-doc.texi
> @@ -158,7 +158,8 @@ TODO (no longer available)
> * pcsys_introduction:: Introduction
> * pcsys_quickstart:: Quick Start
> * sec_invocation:: Invocation
> -* pcsys_keys:: Keys
> +* pcsys_keys:: Keys in the graphical frontends
> +* mux_keys:: Keys in the character backend multiplexer
> * pcsys_monitor:: QEMU Monitor
> * disk_images:: Disk Images
> * pcsys_network:: Network emulation
> @@ -272,7 +273,7 @@ targets do not need a disk image.
> @c man end
>
> @node pcsys_keys
> address@hidden Keys
> address@hidden Keys in the graphical frontends
>
> @c man begin OPTIONS
>
> @@ -322,15 +323,23 @@ Toggle mouse and keyboard grab.
> In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
> @key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
>
> address@hidden Ctrl-a h
> -During emulation, if you are using the @option{-nographic} option, use
> address@hidden h} to get terminal commands:
> address@hidden man end
> +
> address@hidden mux_keys
> address@hidden Keys in the character backend multiplexer
> +
> address@hidden man begin OPTIONS
> +
> +During emulation, if you are using a character backend multiplexer
> +(which is the default if you are using @option{-nographic}) then
> +several commands are available via an escape sequence. These
> +key sequences all start with an escape character, which is @key{Ctrl-a}
> +by default, but can be changed with @option{-echr}. The list below assumes
> +you're using the default.
>
> @table @key
> @item Ctrl-a h
> @kindex Ctrl-a h
> address@hidden Ctrl-a ?
> address@hidden Ctrl-a ?
> Print this help
> @item Ctrl-a x
> @kindex Ctrl-a x
> @@ -346,10 +355,11 @@ Toggle console timestamps
> Send break (magic sysrq in Linux)
> @item Ctrl-a c
> @kindex Ctrl-a c
> -Switch between console and monitor
> +Rotate between the frontends connected to the multiplexer (usually
> +this switches between the monitor and the console)
> @item Ctrl-a Ctrl-a
> address@hidden Ctrl-a a
> -Send Ctrl-a
> address@hidden Ctrl-a Ctrl-a
> +Send the escape character to the frontend
> @end table
> @c man end
>
> diff --git a/qemu-options.hx b/qemu-options.hx
> index 2f0465e..7e6762e 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -2162,8 +2162,49 @@ All devices must have an id, which can be any string
> up to 127 characters long.
> It is used to uniquely identify this device in other command line directives.
>
> A character device may be used in multiplexing mode by multiple front-ends.
> -The key sequence of @key{Control-a} and @key{c} will rotate the input focus
> -between attached front-ends. Specify @option{mux=on} to enable this mode.
> +Specify @option{mux=on} to enable this mode.
> +A multiplexer is a "1:N" device, and here the "1" end is your specified
> chardev
> +backend, and the "N" end is the various parts of QEMU that can talk to a
> chardev.
> +If you create a chardev with @option{id=myid} and @option{mux=on}, QEMU will
> +create a multiplexer with your specified ID, and you can then configure
> multiple
> +front ends to use that chardev ID for their input/output. Up to four
> different
> +front ends can be connected to a single multiplexed chardev. (Without
> +multiplexing enabled, a chardev can only be used by a single front end.)
> +For instance you could use this to allow a single stdio chardev to be used by
> +two serial ports and the QEMU monitor:
> +
> address@hidden
> +-chardev stdio,mux=on,id=char0 \
> +-mon chardev=char0,mode=readline,default \
> +-serial chardev:char0 \
> +-serial chardev:char0
> address@hidden example
> +
> +You can have more than one multiplexer in a system configuration; for
> instance
> +you could have a TCP port multiplexed between UART 0 and UART 1, and stdio
> +multiplexed between the QEMU monitor and a parallel port:
> +
> address@hidden
> +-chardev stdio,mux=on,id=char0 \
> +-mon chardev=char0,mode=readline,default \
> +-parallel chardev:char0 \
> +-chardev tcp,...,mux=on,id=char1 \
> +-serial chardev:char1 \
> +-serial chardev:char1
> address@hidden example
> +
> +When you're using a multiplexed character device, some escape sequences are
> +interpreted in the input. @xref{mux_keys, Keys in the character backend
> +multiplexer}.
> +
> +Note that some other command line options may implicitly create multiplexed
> +character backends; for instance @option{-serial mon:stdio} creates a
> +multiplexed stdio backend connected to the serial port and the QEMU monitor,
> +and @option{-nographic} also multiplexes the console and the monitor to
> +stdio.
> +
> +There is currently no support for multiplexing in the other direction
> +(where a single QEMU front end takes input and output from multiple
> chardevs).
>
> Every backend supports the @option{logfile} option, which supplies the path
> to a file to record all data transmitted via the backend. The
> @option{logappend}
Nice. Reads a whole lot clearer (contextual description, followed by a
practical example and related additional information) than before. And
as a user of QEMU, I could follow if I pay attention carefully. :-)
Thanks!
FWIW:
Reviewed-by: Kashyap Chamarthy <address@hidden>
--
/kashyap