[Qemu-devel] [PATCH COLO-Frame v16 11/35] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily

[zhanghailiang]

We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.

We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached 
ram
to SVM after we receive all PVM's state.

Signed-off-by: zhanghailiang <address@hidden>
Signed-off-by: Li Zhijian <address@hidden>
Signed-off-by: Gonglei <address@hidden>
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
---
v12:
- Fix minor error in error_report (Dave's comment)
- Add Reviewed-by tag
v11:
- Rename 'host_cache' to 'colo_cache' (Dave's suggestion)
v10:
- Split the process of dirty pages recording into a new patch
---
 include/exec/ram_addr.h       |  1 +
 include/migration/migration.h |  4 +++
 migration/colo.c              | 11 +++++++
 migration/ram.c               | 73 ++++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 88 insertions(+), 1 deletion(-)

diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 5adf7a4..6295562 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -26,6 +26,7 @@ struct RAMBlock {
     struct rcu_head rcu;
     struct MemoryRegion *mr;
     uint8_t *host;
+    uint8_t *colo_cache; /* For colo, VM's ram cache */
     ram_addr_t offset;
     ram_addr_t used_length;
     ram_addr_t max_length;
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 0dcb2bd..d7e6e81 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -337,4 +337,8 @@ int ram_save_queue_pages(MigrationState *ms, const char 
*rbname,
 PostcopyState postcopy_state_get(void);
 /* Set the state and return the old state */
 PostcopyState postcopy_state_set(PostcopyState new_state);
+
+/* ram cache */
+int colo_init_ram_cache(void);
+void colo_release_ram_cache(void);
 #endif
diff --git a/migration/colo.c b/migration/colo.c
index 19bffea..fb2b705 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -299,6 +299,7 @@ void *colo_process_incoming_thread(void *opaque)
 {
     MigrationIncomingState *mis = opaque;
     Error *local_err = NULL;
+    int ret;
 
     migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
                       MIGRATION_STATUS_COLO);
@@ -314,6 +315,12 @@ void *colo_process_incoming_thread(void *opaque)
     */
     qemu_file_set_blocking(mis->from_src_file, true);
 
+    ret = colo_init_ram_cache();
+    if (ret < 0) {
+        error_report("Failed to initialize ram cache");
+        goto out;
+    }
+
     colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
                       &local_err);
     if (local_err) {
@@ -364,6 +371,10 @@ out:
         error_report_err(local_err);
     }
 
+    qemu_mutex_lock_iothread();
+    colo_release_ram_cache();
+    qemu_mutex_unlock_iothread();
+
     if (mis->to_src_file) {
         qemu_fclose(mis->to_src_file);
     }
diff --git a/migration/ram.c b/migration/ram.c
index cbe8421..85e2378 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -225,6 +225,7 @@ static RAMBlock *last_sent_block;
 static ram_addr_t last_offset;
 static QemuMutex migration_bitmap_mutex;
 static uint64_t migration_dirty_pages;
+static bool ram_cache_enable;
 static uint32_t last_version;
 static bool ram_bulk_stage;
 
@@ -2192,6 +2193,20 @@ static inline void *host_from_ram_block_offset(RAMBlock 
*block,
     return block->host + offset;
 }
 
+static inline void *colo_cache_from_block_offset(RAMBlock *block,
+                                                 ram_addr_t offset)
+{
+    if (!offset_in_ramblock(block, offset)) {
+        return NULL;
+    }
+    if (!block->colo_cache) {
+        error_report("%s: colo_cache is NULL in block :%s",
+                     __func__, block->idstr);
+        return NULL;
+    }
+    return block->colo_cache + offset;
+}
+
 /*
  * If a page (or a whole RDMA chunk) has been
  * determined to be zero, then zap it.
@@ -2468,7 +2483,12 @@ static int ram_load(QEMUFile *f, void *opaque, int 
version_id)
                      RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
             RAMBlock *block = ram_block_from_stream(f, flags);
 
-            host = host_from_ram_block_offset(block, addr);
+            /* After going into COLO, we should load the Page into colo_cache 
*/
+            if (ram_cache_enable) {
+                host = colo_cache_from_block_offset(block, addr);
+            } else {
+                host = host_from_ram_block_offset(block, addr);
+            }
             if (!host) {
                 error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
                 ret = -EINVAL;
@@ -2563,6 +2583,57 @@ static int ram_load(QEMUFile *f, void *opaque, int 
version_id)
     return ret;
 }
 
+/*
+ * colo cache: this is for secondary VM, we cache the whole
+ * memory of the secondary VM, it will be called after first migration.
+ */
+int colo_init_ram_cache(void)
+{
+    RAMBlock *block;
+
+    rcu_read_lock();
+    QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+        block->colo_cache = qemu_anon_ram_alloc(block->used_length, NULL);
+        if (!block->colo_cache) {
+            error_report("%s: Can't alloc memory for COLO cache of block %s,"
+                         "size 0x" RAM_ADDR_FMT, __func__, block->idstr,
+                         block->used_length);
+            goto out_locked;
+        }
+        memcpy(block->colo_cache, block->host, block->used_length);
+    }
+    rcu_read_unlock();
+    ram_cache_enable = true;
+    return 0;
+
+out_locked:
+    QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+        if (block->colo_cache) {
+            qemu_anon_ram_free(block->colo_cache, block->used_length);
+            block->colo_cache = NULL;
+        }
+    }
+
+    rcu_read_unlock();
+    return -errno;
+}
+
+void colo_release_ram_cache(void)
+{
+    RAMBlock *block;
+
+    ram_cache_enable = false;
+
+    rcu_read_lock();
+    QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+        if (block->colo_cache) {
+            qemu_anon_ram_free(block->colo_cache, block->used_length);
+            block->colo_cache = NULL;
+        }
+    }
+    rcu_read_unlock();
+}
+
 static SaveVMHandlers savevm_ram_handlers = {
     .save_live_setup = ram_save_setup,
     .save_live_iterate = ram_save_iterate,
-- 
1.8.3.1