Re: [Qemu-devel] [PATCH v7 5/6] acpi: Add IPMI table entries

[Michael S. Tsirkin]

On Tue, May 24, 2016 at 12:37:21PM -0500, address@hidden wrote:
> From: Corey Minyard <address@hidden>
> 
> Use the new ACPI table construction tools to create an ACPI
> entry for IPMI.  This adds a function called from build_dsdt

I think you renamed it since.

> to add an DSDT entry for IPMI if IPMI is compiled in and has
> registered firmware.  It also adds a dummy function if IPMI
> is not compiled in.
> 
> This conforms to section "C3-2 Locating IPMI System Interfaces in
> ACPI Name Space" in the IPMI 2.0 specification.
> 
> Signed-off-by: Corey Minyard <address@hidden>
> ---
>  hw/acpi/Makefile.objs  |   2 +
>  hw/acpi/ipmi.c         | 105 
> +++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/acpi/noipmi.c       |  14 +++++++
>  hw/i386/acpi-build.c   |  12 ++++++
>  include/hw/acpi/ipmi.h |  22 +++++++++++
>  5 files changed, 155 insertions(+)
>  create mode 100644 hw/acpi/ipmi.c
>  create mode 100644 hw/acpi/noipmi.c
>  create mode 100644 include/hw/acpi/ipmi.h
> 
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index faee86c..c7c6db6 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -6,3 +6,5 @@ obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>  common-obj-$(CONFIG_ACPI) += acpi_interface.o
>  common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
>  common-obj-$(CONFIG_ACPI) += aml-build.o
> +common-obj-$(call land,$(CONFIG_ACPI),$(CONFIG_IPMI)) += ipmi.o
> +common-obj-$(call land,$(CONFIG_SMBIOS),$(call lnot,$(CONFIG_IPMI))) += 
> noipmi.o
> diff --git a/hw/acpi/ipmi.c b/hw/acpi/ipmi.c
> new file mode 100644
> index 0000000..7e74ce4
> --- /dev/null
> +++ b/hw/acpi/ipmi.c
> @@ -0,0 +1,105 @@
> +/*
> + * IPMI ACPI firmware handling
> + *
> + * Copyright (c) 2015,2016 Corey Minyard, MontaVista Software, LLC
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/ipmi/ipmi.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/ipmi.h"
> +
> +static Aml *aml_ipmi_crs(IPMIFwInfo *info)
> +{
> +    Aml *crs = aml_resource_template();
> +
> +    /*
> +     * The base address is fixed and cannot change.  That may be different
> +     * if someone does PCI, but we aren't there yet.
> +     */
> +    switch (info->memspace) {
> +    case IPMI_MEMSPACE_IO:
> +        aml_append(crs, aml_io(AML_DECODE16, info->base_address,
> +                               info->base_address + info->register_length - 
> 1,
> +                               info->register_spacing, 
> info->register_length));
> +        break;
> +    case IPMI_MEMSPACE_MEM32:
> +        aml_append(crs,
> +                   aml_dword_memory(AML_POS_DECODE,
> +                            AML_MIN_FIXED, AML_MAX_FIXED,
> +                            AML_NON_CACHEABLE, AML_READ_WRITE,
> +                            0xffffffff,
> +                            info->base_address,
> +                            info->base_address + info->register_length - 1,
> +                            info->register_spacing, info->register_length));
> +        break;
> +    case IPMI_MEMSPACE_MEM64:
> +        aml_append(crs,
> +                   aml_qword_memory(AML_POS_DECODE,
> +                            AML_MIN_FIXED, AML_MAX_FIXED,
> +                            AML_NON_CACHEABLE, AML_READ_WRITE,
> +                            0xffffffffffffffffULL,
> +                            info->base_address,
> +                            info->base_address + info->register_length - 1,
> +                            info->register_spacing, info->register_length));
> +        break;
> +    case IPMI_MEMSPACE_SMBUS:
> +        aml_append(crs, aml_return(aml_int(info->base_address)));
> +        break;
> +    default:
> +        abort();
> +    }
> +
> +    if (info->interrupt_number) {
> +        aml_append(crs, aml_irq_no_flags(info->interrupt_number));
> +    }
> +
> +    return crs;
> +}
> +
> +static Aml *aml_ipmi_device(IPMIFwInfo *info)
> +{
> +    Aml *dev;
> +    uint16_t version = ((info->ipmi_spec_major_revision << 8)
> +                        | (info->ipmi_spec_minor_revision << 4));
> +
> +    assert(info->ipmi_spec_minor_revision <= 15);
> +
> +    dev = aml_device("MI%d", info->uuid);
> +    aml_append(dev, aml_name_decl("_HID", aml_eisaid("IPI0001")));
> +    aml_append(dev, aml_name_decl("_STR", aml_string("ipmi_%s",
> +                                                     info->interface_name)));
> +    aml_append(dev, aml_name_decl("_UID", aml_int(info->uuid)));
> +    aml_append(dev, aml_name_decl("_CRS", aml_ipmi_crs(info)));
> +    aml_append(dev, aml_name_decl("_IFT", aml_int(info->interface_type)));
> +    aml_append(dev, aml_name_decl("_SRV", aml_int(version)));
> +
> +    return dev;
> +}
> +
> +void build_acpi_ipmi_devices(Aml *scope, BusState *bus)
> +{
> +
> +    BusChild *kid;
> +
> +    QTAILQ_FOREACH(kid, &bus->children,  sibling) {
> +        IPMIInterface *ii;
> +        IPMIInterfaceClass *iic;
> +        IPMIFwInfo info;
> +        Object *obj = object_dynamic_cast(OBJECT(kid->child),
> +                                          TYPE_IPMI_INTERFACE);
> +
> +        if (!obj) {
> +            continue;
> +        }
> +
> +        ii = IPMI_INTERFACE(obj);
> +        iic = IPMI_INTERFACE_GET_CLASS(obj);
> +        iic->get_fwinfo(ii, &info);
> +        aml_append(scope, aml_ipmi_device(&info));
> +    }
> +}
> diff --git a/hw/acpi/noipmi.c b/hw/acpi/noipmi.c
> new file mode 100644
> index 0000000..98b6dce
> --- /dev/null
> +++ b/hw/acpi/noipmi.c
> @@ -0,0 +1,14 @@
> +/*
> + * IPMI ACPI firmware handling
> + *
> + * Copyright (c) 2015,2016 Corey Minyard, MontaVista Software, LLC
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "hw/acpi/ipmi.h"
> +
> +void build_acpi_ipmi_devices(Aml *table, BusState *bus)
> +{
> +}
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 279f0d7..4b05bc2 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -59,6 +59,8 @@
>  #include "qapi/qmp/qint.h"
>  #include "qom/qom-qobject.h"
>  
> +#include "hw/acpi/ipmi.h"
> +
>  /* These are used to size the ACPI tables for -M pc-i440fx-1.7 and
>   * -M pc-i440fx-2.0.  Even if the actual amount of AML generated grows
>   * a little bit, there should be plenty of free space since the DSDT
> @@ -1448,8 +1450,10 @@ static Aml *build_com_device_aml(uint8_t uid)
>  static void build_isa_devices_aml(Aml *table)
>  {
>      ISADevice *fdc = pc_find_fdc0();
> +    bool ambiguous;
>  
>      Aml *scope = aml_scope("_SB.PCI0.ISA");
> +    Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
>  
>      aml_append(scope, build_rtc_device_aml());
>      aml_append(scope, build_kbd_device_aml());
> @@ -1461,6 +1465,14 @@ static void build_isa_devices_aml(Aml *table)
>      aml_append(scope, build_com_device_aml(1));
>      aml_append(scope, build_com_device_aml(2));
>  
> +    if (ambiguous) {
> +        error_report("Multiple ISA busses, unable to define IPMI ACPI data");
> +    } else if (!obj) {
> +        error_report("No ISA bus, unable to define IPMI ACPI data");
> +    } else {
> +        build_acpi_ipmi_devices(scope, BUS(obj));
> +    }
> +
>      aml_append(table, scope);
>  }
>  
> diff --git a/include/hw/acpi/ipmi.h b/include/hw/acpi/ipmi.h
> new file mode 100644
> index 0000000..ab2bb29
> --- /dev/null
> +++ b/include/hw/acpi/ipmi.h
> @@ -0,0 +1,22 @@
> +/*
> + * QEMU IPMI ACPI handling
> + *
> + * Copyright (c) 2015,2016 Corey Minyard <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +#ifndef HW_ACPI_IPMI_H
> +#define HW_ACPI_IPMI_H
> +
> +#include "qemu/osdep.h"
> +#include "hw/acpi/aml-build.h"
> +
> +/*
> + * Add ACPI IPMI entries for all registered IPMI devices whose parent
> + * bus matches the given bus.  The resource is the ACPI resource that
> + * contains the IPMI device, this is required for the I2C CRS.
> + */
> +void build_acpi_ipmi_devices(Aml *table, BusState *bus);
> +
> +#endif /* HW_ACPI_IPMI_H */
> -- 
> 2.7.4