[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v9 08/25] acpi: add DMAR scope definition for root I
From: |
Peter Xu |
Subject: |
[Qemu-devel] [PATCH v9 08/25] acpi: add DMAR scope definition for root IOAPIC |
Date: |
Mon, 13 Jun 2016 21:09:24 +0800 |
To enable interrupt remapping for intel IOMMU device, each IOAPIC device
in the system reported via ACPI MADT must be explicitly enumerated under
one specific remapping hardware unit. This patch adds the root-complex
IOAPIC into the default DMAR device.
Please refer to VT-d spec 8.3.1.1 for more information.
Signed-off-by: Peter Xu <address@hidden>
---
hw/i386/acpi-build.c | 19 ++++++++++++++++---
include/hw/acpi/acpi-defs.h | 15 +++++++++++++++
include/hw/pci-host/q35.h | 8 ++++++++
3 files changed, 39 insertions(+), 3 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 961ccd6a..eec022e 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -77,6 +77,9 @@
#define ACPI_BUILD_DPRINTF(fmt, ...)
#endif
+/* Default IOAPIC ID */
+#define ACPI_BUILD_IOAPIC_ID 0x0
+
typedef struct AcpiMcfgInfo {
uint64_t mcfg_base;
uint32_t mcfg_size;
@@ -370,7 +373,6 @@ build_madt(GArray *table_data, BIOSLinker *linker,
PCMachineState *pcms)
io_apic = acpi_data_push(table_data, sizeof *io_apic);
io_apic->type = ACPI_APIC_IO;
io_apic->length = sizeof(*io_apic);
-#define ACPI_BUILD_IOAPIC_ID 0x0
io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID;
io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS);
io_apic->interrupt = cpu_to_le32(0);
@@ -2425,6 +2427,9 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker)
AcpiDmarHardwareUnit *drhd;
uint8_t dmar_flags = 0;
X86IOMMUState *iommu = x86_iommu_get_default();
+ AcpiDmarDeviceScope *scope = NULL;
+ /* Root complex IOAPIC use one path[0] only */
+ uint8_t ioapic_scope_size = sizeof(*scope) + sizeof(scope->path[0]);
assert(iommu);
if (iommu->intr_supported) {
@@ -2437,13 +2442,21 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker)
dmar->flags = dmar_flags;
/* DMAR Remapping Hardware Unit Definition structure */
- drhd = acpi_data_push(table_data, sizeof(*drhd));
+ drhd = acpi_data_push(table_data, sizeof(*drhd) + ioapic_scope_size);
drhd->type = cpu_to_le16(ACPI_DMAR_TYPE_HARDWARE_UNIT);
- drhd->length = cpu_to_le16(sizeof(*drhd)); /* No device scope now */
+ drhd->length = cpu_to_le16(sizeof(*drhd) + ioapic_scope_size);
drhd->flags = ACPI_DMAR_INCLUDE_PCI_ALL;
drhd->pci_segment = cpu_to_le16(0);
drhd->address = cpu_to_le64(Q35_HOST_BRIDGE_IOMMU_ADDR);
+ /* Scope definition for the root-complex IOAPIC */
+ scope = &drhd->scope[0];
+ scope->entry_type = ACPI_DMAR_DEV_SCOPE_TYPE_IOAPIC;
+ scope->length = ioapic_scope_size;
+ scope->enumeration_id = ACPI_BUILD_IOAPIC_ID;
+ scope->bus = Q35_PSEUDO_BUS_PLATFORM;
+ scope->path[0] = cpu_to_le16(Q35_PSEUDO_DEVFN_IOAPIC);
+
build_header(linker, table_data, (void *)(table_data->data + dmar_start),
"DMAR", table_data->len - dmar_start, 1, NULL, NULL);
}
diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index 850a962..b46e472 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -569,6 +569,20 @@ enum {
/*
* Sub-structures for DMAR
*/
+
+#define ACPI_DMAR_DEV_SCOPE_TYPE_IOAPIC (0x03)
+
+/* Device scope structure for DRHD. */
+struct AcpiDmarDeviceScope {
+ uint8_t entry_type;
+ uint8_t length;
+ uint16_t reserved;
+ uint8_t enumeration_id;
+ uint8_t bus;
+ uint16_t path[0]; /* list of dev:func pairs */
+} QEMU_PACKED;
+typedef struct AcpiDmarDeviceScope AcpiDmarDeviceScope;
+
/* Type 0: Hardware Unit Definition */
struct AcpiDmarHardwareUnit {
uint16_t type;
@@ -577,6 +591,7 @@ struct AcpiDmarHardwareUnit {
uint8_t reserved;
uint16_t pci_segment; /* The PCI Segment associated with this unit */
uint64_t address; /* Base address of remapping hardware register-set */
+ AcpiDmarDeviceScope scope[0];
} QEMU_PACKED;
typedef struct AcpiDmarHardwareUnit AcpiDmarHardwareUnit;
diff --git a/include/hw/pci-host/q35.h b/include/hw/pci-host/q35.h
index c5c073d..312b47f 100644
--- a/include/hw/pci-host/q35.h
+++ b/include/hw/pci-host/q35.h
@@ -175,4 +175,12 @@ typedef struct Q35PCIHost {
uint64_t mch_mcfg_base(void);
+/*
+ * Arbitary but unique BNF number for IOAPIC device.
+ *
+ * TODO: make sure there would have no conflict with real PCI bus
+ */
+#define Q35_PSEUDO_BUS_PLATFORM (0xff)
+#define Q35_PSEUDO_DEVFN_IOAPIC (0x00)
+
#endif /* HW_Q35_H */
--
2.4.11
- [Qemu-devel] [PATCH v9 00/25] IOMMU: Enable interrupt remapping for Intel IOMMU, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 01/25] x86-iommu: introduce parent class, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 03/25] x86-iommu: q35: generalize find_add_as(), Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 02/25] x86-iommu: provide x86_iommu_get_default, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 04/25] x86-iommu: introduce "intremap" property, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 06/25] intel_iommu: allow queued invalidation for IR, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 05/25] acpi: enable INTR for DMAR report structure, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 07/25] intel_iommu: set IR bit for ECAP register, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 08/25] acpi: add DMAR scope definition for root IOAPIC,
Peter Xu <=
- [Qemu-devel] [PATCH v9 10/25] intel_iommu: handle interrupt remap enable, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 09/25] intel_iommu: define interrupt remap table addr register, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 12/25] intel_iommu: add IR translation faults defines, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 11/25] intel_iommu: define several structs for IOMMU IR, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 13/25] intel_iommu: Add support for PCI MSI remap, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 14/25] q35: ioapic: add support for emulated IOAPIC IR, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 15/25] ioapic: introduce ioapic_entry_parse() helper, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 16/25] intel_iommu: add support for split irqchip, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 17/25] x86-iommu: introduce IEC notifiers, Peter Xu, 2016/06/13
- [Qemu-devel] [PATCH v9 18/25] ioapic: register IOMMU IEC notifier for ioapic, Peter Xu, 2016/06/13