[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking wheth
From: |
David Gibson |
Subject: |
Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully |
Date: |
Wed, 15 Jun 2016 13:10:18 +1000 |
User-agent: |
Mutt/1.6.1 (2016-04-27) |
On Tue, Jun 14, 2016 at 03:57:56PM +0200, Thomas Huth wrote:
> Since the mac99 and g3beige PowerPC machines recently broke without
> being noticed, it would be good to have a tester for "make check"
> that detects such issues immediately. A simple way to test the firmware
> of these machines is to use the "-prom-env" parameter of QEMU. This
> parameter can be used to put some Forth code into the 'boot-command'
> firmware variable which then can signal success to the tester by
> writing a magic value to a known memory location. And since some of the
> Sparc machines are also using OpenBIOS, they are now tested with this
> prom-env-tester, too.
>
> Reviewed-by: Markus Armbruster <address@hidden>
> Signed-off-by: Thomas Huth <address@hidden>
> ---
> v2: Removed unnecessary include statements (as suggested by Markus)
Beautiful, I've applied this to ppc-for-2.7, assuming I don't get an
objection to taking this through my tree.
>
> tests/Makefile.include | 5 +++
> tests/prom-env-test.c | 90
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 95 insertions(+)
> create mode 100644 tests/prom-env-test.c
>
> diff --git a/tests/Makefile.include b/tests/Makefile.include
> index 7d63d16..f95a3ca 100644
> --- a/tests/Makefile.include
> +++ b/tests/Makefile.include
> @@ -258,6 +258,10 @@ check-qtest-ppc-y += tests/boot-order-test$(EXESUF)
> check-qtest-ppc64-y += tests/boot-order-test$(EXESUF)
> check-qtest-ppc64-y += tests/spapr-phb-test$(EXESUF)
> gcov-files-ppc64-y += ppc64-softmmu/hw/ppc/spapr_pci.c
> +check-qtest-ppc-y = tests/prom-env-test$(EXESUF)
> +check-qtest-ppc64-y = tests/prom-env-test$(EXESUF)
> +check-qtest-sparc-y = tests/prom-env-test$(EXESUF)
> +check-qtest-sparc64-y = tests/prom-env-test$(EXESUF)
> check-qtest-microblazeel-y = $(check-qtest-microblaze-y)
> check-qtest-xtensaeb-y = $(check-qtest-xtensa-y)
>
> @@ -549,6 +553,7 @@ tests/rtc-test$(EXESUF): tests/rtc-test.o
> tests/m48t59-test$(EXESUF): tests/m48t59-test.o
> tests/endianness-test$(EXESUF): tests/endianness-test.o
> tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y)
> +tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y)
> tests/fdc-test$(EXESUF): tests/fdc-test.o
> tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
> tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y)
> diff --git a/tests/prom-env-test.c b/tests/prom-env-test.c
> new file mode 100644
> index 0000000..6df57d2
> --- /dev/null
> +++ b/tests/prom-env-test.c
> @@ -0,0 +1,90 @@
> +/*
> + * Test OpenBIOS-based machines.
> + *
> + * Copyright (c) 2016 Red Hat Inc.
> + *
> + * Author:
> + * Thomas Huth <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2
> + * or later. See the COPYING file in the top-level directory.
> + *
> + * This test is used to check that some OpenBIOS machines can be started
> + * successfully in TCG mode. To do this, we first put some Forth code into
> + * the "boot-command" Open Firmware environment variable. This Forth code
> + * writes a well-known magic value to a known location in memory. Then we
> + * start the guest so that OpenBIOS can boot and finally run the Forth code.
> + * The testing code here then can finally check whether the value has been
> + * successfully written into the guest memory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "libqtest.h"
> +
> +#define MAGIC 0xcafec0de
> +#define ADDRESS 0x4000
> +
> +static void check_guest_memory(void)
> +{
> + uint32_t signature;
> + int i;
> +
> + /* Poll until code has run and modified memory. Wait at most 30 seconds
> */
> + for (i = 0; i < 3000; ++i) {
> + signature = readl(ADDRESS);
> + if (signature == MAGIC) {
> + break;
> + }
> + g_usleep(10000);
> + }
> +
> + g_assert_cmphex(signature, ==, MAGIC);
> +}
> +
> +static void test_machine(const void *machine)
> +{
> + char *args;
> +
> + args = g_strdup_printf("-M %s,accel=tcg -prom-env 'boot-command=%x %x
> l!'",
> + (const char *)machine, MAGIC, ADDRESS);
> +
> + qtest_start(args);
> + check_guest_memory();
> + qtest_quit(global_qtest);
> +
> + g_free(args);
> +}
> +
> +static void add_tests(const char *machines[])
> +{
> + int i;
> + char *name;
> +
> + for (i = 0; machines[i] != NULL; i++) {
> + name = g_strdup_printf("prom-env/%s", machines[i]);
> + qtest_add_data_func(name, machines[i], test_machine);
> + g_free(name);
> + }
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + const char *sparc_machines[] = { "SPARCbook", "Voyager", "SS-20", NULL };
> + const char *sparc64_machines[] = { "sun4u", "sun4v", NULL };
> + const char *mac_machines[] = { "mac99", "g3beige", NULL };
> + const char *arch = qtest_get_arch();
> +
> + g_test_init(&argc, &argv, NULL);
> +
> + if (!strcmp(arch, "ppc") || !strcmp(arch, "ppc64")) {
> + add_tests(mac_machines);
> + } else if (!strcmp(arch, "sparc")) {
> + add_tests(sparc_machines);
> + } else if (!strcmp(arch, "sparc64")) {
> + add_tests(sparc64_machines);
> + } else {
> + g_assert_not_reached();
> + }
> +
> + return g_test_run();
> +}
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
- [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Thomas Huth, 2016/06/14
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully,
David Gibson <=
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, David Gibson, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Thomas Huth, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Mark Cave-Ayland, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Artyom Tarasenko, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Mark Cave-Ayland, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Artyom Tarasenko, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Mark Cave-Ayland, 2016/06/17
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Artyom Tarasenko, 2016/06/19
- Re: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully, Richard Henderson, 2016/06/19