[Qemu-devel] [PATCH v2 13/40] trace: split out trace events for hw/misc/ directory

[Daniel P. Berrange]

Move all trace-events for files in the hw/misc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <address@hidden>
---
 Makefile.objs        |  1 +
 hw/misc/trace-events | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 trace-events         | 51 ---------------------------------------------------
 3 files changed, 53 insertions(+), 51 deletions(-)
 create mode 100644 hw/misc/trace-events

diff --git a/Makefile.objs b/Makefile.objs
index 9d5f64d..4f0ccbe 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -130,3 +130,4 @@ trace-events-y += hw/intc/trace-events
 trace-events-y += hw/net/trace-events
 trace-events-y += hw/virtio/trace-events
 trace-events-y += hw/audio/trace-events
+trace-events-y += hw/misc/trace-events
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
new file mode 100644
index 0000000..16b6701
--- /dev/null
+++ b/hw/misc/trace-events
@@ -0,0 +1,52 @@
+# See docs/trace-events.txt for syntax documentation.
+
+# hw/misc/eccmemctl.c
+ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
+ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
+ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
+ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
+ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
+ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
+ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
+ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
+ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
+ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
+ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
+ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
+ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
+ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
+ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
+ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
+ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = 
%02x"
+ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= 
%02x"
+
+# hw/misc/slavio_misc.c
+slavio_misc_update_irq_raise(void) "Raise IRQ"
+slavio_misc_update_irq_lower(void) "Lower IRQ"
+slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, 
config: %d"
+slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
+slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
+slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
+slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
+slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
+slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
+slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
+slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
+slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
+slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
+apc_mem_writeb(uint32_t val) "Write power management %02x"
+apc_mem_readb(uint32_t ret) "Read power management %02x"
+slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
+slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
+slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
+slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
+
+# hw/misc/milkymist-hpdmc.c
+milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x 
value=%08x"
+milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x 
value=%08x"
+
+# hw/misc/milkymist-pfpu.c
+milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
+milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
+milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b 
%08x dma_ptr %08x"
+milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
diff --git a/trace-events b/trace-events
index b8cfcd8..605bd40 100644
--- a/trace-events
+++ b/trace-events
@@ -46,26 +46,6 @@ virtio_balloon_to_target(uint64_t target, uint32_t 
num_pages) "balloon target: %
 nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x"
 nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x 
-> 0x%02x"
 
-# hw/misc/eccmemctl.c
-ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
-ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
-ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
-ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
-ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
-ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
-ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
-ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
-ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
-ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
-ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
-ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
-ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
-ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
-ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
-ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
-ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = 
%02x"
-ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= 
%02x"
-
 # hw/nvram/fw_cfg.c
 fw_cfg_select(void *s, uint16_t key, int ret) "%p key %d = %d"
 fw_cfg_read(void *s, uint64_t ret) "%p = %"PRIx64
@@ -96,27 +76,6 @@ ps2_mouse_reset(void *opaque) "%p"
 ps2_kbd_init(void *s) "%p"
 ps2_mouse_init(void *s) "%p"
 
-# hw/misc/slavio_misc.c
-slavio_misc_update_irq_raise(void) "Raise IRQ"
-slavio_misc_update_irq_lower(void) "Lower IRQ"
-slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, 
config: %d"
-slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
-slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
-slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
-slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
-slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
-slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
-slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
-slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
-slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
-slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
-apc_mem_writeb(uint32_t val) "Write power management %02x"
-apc_mem_readb(uint32_t ret) "Read power management %02x"
-slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
-slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
-slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
-slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
-
 # hw/timer/slavio_timer.c
 slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) 
"limit %"PRIx64" count %x%08x"
 slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x"
@@ -589,20 +548,10 @@ megasas_mmio_invalid_readl(unsigned long addr) "addr 
0x%lx"
 megasas_mmio_writel(const char *reg, uint32_t val) "reg %s: 0x%x"
 megasas_mmio_invalid_writel(uint32_t addr, uint32_t val) "addr 0x%x: 0x%x"
 
-# hw/misc/milkymist-hpdmc.c
-milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x 
value=%08x"
-milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x 
value=%08x"
-
 # hw/sd/milkymist-memcard.c
 milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
 milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
 
-# hw/misc/milkymist-pfpu.c
-milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
-milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
-milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b 
%08x dma_ptr %08x"
-milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
-
 # hw/input/milkymist-softusb.c
 milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
 milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value 
%08x"
-- 
2.5.5