[Qemu-devel] [PATCH v9 2/8] register: Add Register API

[Alistair Francis]

This API provides some encapsulation of registers and factors out some
common functionality to common code. Bits of device state (usually MMIO
registers) often have all sorts of access restrictions and semantics
associated with them. This API allows you to define what those
restrictions are on a bit-by-bit basis.

Helper functions are then used to access the register which observe the
semantics defined by the RegisterAccessInfo struct.

Some features:
Bits can be marked as read_only (ro field)
Bits can be marked as write-1-clear (w1c field)
Bits can be marked as reserved (rsvd field)
Reset values can be defined (reset)
Bits can be marked clear on read (cor)
Pre and post action callbacks can be added to read and write ops
Verbose debugging info can be enabled/disabled

Useful for defining device register spaces in a data driven way. Cuts
down on a lot of the verbosity and repetition in the switch-case blocks
in the standard foo_mmio_read/write functions.

Also useful for automated generation of device models from hardware
design sources.

Signed-off-by: Peter Crosthwaite <address@hidden>
Signed-off-by: Alistair Francis <address@hidden>
Reviewed-by: Alex Bennée <address@hidden>
Reviewed-by: Peter Maydell <address@hidden>
---
V9:
 - Fixup read enable mask logic
V8:
 - Add read enable mask
V5:
 - Convert to using only one memory region
V4:
 - Rebase
 - Remove the guest error masking
 - Simplify the unimplemented masking
 - Use the reserved value in the write calculations
 - Remove read_lite and write_lite
 - General fixes to asserts and log printing
V3:
 - Address some comments from Fred

 hw/core/Makefile.objs |   1 +
 hw/core/register.c    | 160 ++++++++++++++++++++++++++++++++++++++++++++++++++
 include/hw/register.h | 112 +++++++++++++++++++++++++++++++++++
 3 files changed, 273 insertions(+)
 create mode 100644 hw/core/register.c
 create mode 100644 include/hw/register.h

diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index 82a9ef8..cfd4840 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -15,4 +15,5 @@ common-obj-$(CONFIG_SOFTMMU) += machine.o
 common-obj-$(CONFIG_SOFTMMU) += null-machine.o
 common-obj-$(CONFIG_SOFTMMU) += loader.o
 common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
+common-obj-$(CONFIG_SOFTMMU) += register.o
 common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
diff --git a/hw/core/register.c b/hw/core/register.c
new file mode 100644
index 0000000..033b03c
--- /dev/null
+++ b/hw/core/register.c
@@ -0,0 +1,160 @@
+/*
+ * Register Definition API
+ *
+ * Copyright (c) 2016 Xilinx Inc.
+ * Copyright (c) 2013 Peter Crosthwaite <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/register.h"
+#include "hw/qdev.h"
+#include "qemu/log.h"
+
+static inline void register_write_val(RegisterInfo *reg, uint64_t val)
+{
+    g_assert(reg->data);
+
+    switch (reg->data_size) {
+    case 1:
+        *(uint8_t *)reg->data = val;
+        break;
+    case 2:
+        *(uint16_t *)reg->data = val;
+        break;
+    case 4:
+        *(uint32_t *)reg->data = val;
+        break;
+    case 8:
+        *(uint64_t *)reg->data = val;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static inline uint64_t register_read_val(RegisterInfo *reg)
+{
+    switch (reg->data_size) {
+    case 1:
+        return *(uint8_t *)reg->data;
+    case 2:
+        return *(uint16_t *)reg->data;
+    case 4:
+        return *(uint32_t *)reg->data;
+    case 8:
+        return *(uint64_t *)reg->data;
+    default:
+        g_assert_not_reached();
+    }
+    return 0; /* unreachable */
+}
+
+void register_write(RegisterInfo *reg, uint64_t val, uint64_t we,
+                    const char *prefix, bool debug)
+{
+    uint64_t old_val, new_val, test, no_w_mask;
+    const RegisterAccessInfo *ac;
+
+    assert(reg);
+
+    ac = reg->access;
+
+    if (!ac || !ac->name) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: write to undefined device state "
+                      "(written value: %#" PRIx64 ")\n", prefix, val);
+        return;
+    }
+
+    old_val = reg->data ? register_read_val(reg) : ac->reset;
+
+    test = (old_val ^ val) & ac->rsvd;
+    if (test) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: change of value in reserved bit"
+                      "fields: %#" PRIx64 ")\n", prefix, test);
+    }
+
+    test = val & ac->unimp;
+    if (test) {
+        qemu_log_mask(LOG_UNIMP,
+                      "%s:%s writing %#" PRIx64 " to unimplemented bits:" \
+                      " %#" PRIx64 "",
+                      prefix, reg->access->name, val, ac->unimp);
+    }
+
+    /* Create the no write mask based on the read only, write to clear and
+     * reserved bit masks.
+     */
+    no_w_mask = ac->ro | ac->w1c | ac->rsvd | ~we;
+    new_val = (val & ~no_w_mask) | (old_val & no_w_mask);
+    new_val &= ~(val & ac->w1c);
+
+    if (ac->pre_write) {
+        new_val = ac->pre_write(reg, new_val);
+    }
+
+    if (debug) {
+        qemu_log("%s:%s: write of value %#" PRIx64 "\n", prefix, ac->name,
+                 new_val);
+    }
+
+    register_write_val(reg, new_val);
+
+    if (ac->post_write) {
+        ac->post_write(reg, new_val);
+    }
+}
+
+uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix,
+                       bool debug)
+{
+    uint64_t ret;
+    const RegisterAccessInfo *ac;
+
+    assert(reg);
+
+    ac = reg->access;
+    if (!ac || !ac->name) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: read from undefined device 
state\n",
+                      prefix);
+        return 0;
+    }
+
+    ret = reg->data ? register_read_val(reg) : ac->reset;
+
+    register_write_val(reg, ret & ~(ac->cor & re));
+
+    /* Mask based on the read enable size */
+    ret &= re;
+
+    if (ac->post_read) {
+        ret = ac->post_read(reg, ret);
+    }
+
+    if (debug) {
+        qemu_log("%s:%s: read of value %#" PRIx64 "\n", prefix,
+                 ac->name, ret);
+    }
+
+    return ret;
+}
+
+void register_reset(RegisterInfo *reg)
+{
+    g_assert(reg);
+
+    if (!reg->data || !reg->access) {
+        return;
+    }
+
+    register_write_val(reg, reg->access->reset);
+}
diff --git a/include/hw/register.h b/include/hw/register.h
new file mode 100644
index 0000000..6a2bc75
--- /dev/null
+++ b/include/hw/register.h
@@ -0,0 +1,112 @@
+/*
+ * Register Definition API
+ *
+ * Copyright (c) 2016 Xilinx Inc.
+ * Copyright (c) 2013 Peter Crosthwaite <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#ifndef REGISTER_H
+#define REGISTER_H
+
+#include "exec/memory.h"
+
+typedef struct RegisterInfo RegisterInfo;
+typedef struct RegisterAccessInfo RegisterAccessInfo;
+
+/**
+ * Access description for a register that is part of guest accessible device
+ * state.
+ *
+ * @name: String name of the register
+ * @ro: whether or not the bit is read-only
+ * @w1c: bits with the common write 1 to clear semantic.
+ * @reset: reset value.
+ * @cor: Bits that are clear on read
+ * @rsvd: Bits that are reserved and should not be changed
+ *
+ * @pre_write: Pre write callback. Passed the value that's to be written,
+ * immediately before the actual write. The returned value is what is written,
+ * giving the handler a chance to modify the written value.
+ * @post_write: Post write callback. Passed the written value. Most write side
+ * effects should be implemented here.
+ *
+ * @post_read: Post read callback. Passes the value that is about to be 
returned
+ * for a read. The return value from this function is what is ultimately read,
+ * allowing this function to modify the value before return to the client.
+ */
+
+struct RegisterAccessInfo {
+    const char *name;
+    uint64_t ro;
+    uint64_t w1c;
+    uint64_t reset;
+    uint64_t cor;
+    uint64_t rsvd;
+    uint64_t unimp;
+
+    uint64_t (*pre_write)(RegisterInfo *reg, uint64_t val);
+    void (*post_write)(RegisterInfo *reg, uint64_t val);
+
+    uint64_t (*post_read)(RegisterInfo *reg, uint64_t val);
+};
+
+/**
+ * A register that is part of guest accessible state
+ * @data: pointer to the register data. Will be cast
+ * to the relevant uint type depending on data_size.
+ * @data_size: Size of the register in bytes. Must be
+ * 1, 2, 4 or 8
+ *
+ * @access: Access description of this register
+ *
+ * @debug: Whether or not verbose debug is enabled
+ * @prefix: String prefix for log and debug messages
+ *
+ * @opaque: Opaque data for the register
+ */
+
+struct RegisterInfo {
+    /* <public> */
+    void *data;
+    int data_size;
+
+    const RegisterAccessInfo *access;
+
+    void *opaque;
+};
+
+/**
+ * write a value to a register, subject to its restrictions
+ * @reg: register to write to
+ * @val: value to write
+ * @we: write enable mask
+ * @prefix: The device prefix that should be printed before the register name
+ * @debug: Should the write operation debug information be printed?
+ */
+
+void register_write(RegisterInfo *reg, uint64_t val, uint64_t we,
+                    const char *prefix, bool debug);
+
+/**
+ * read a value from a register, subject to its restrictions
+ * @reg: register to read from
+ * @re: read enable mask
+ * @prefix: The device prefix that should be printed before the register name
+ * @debug: Should the read operation debug information be printed?
+ * returns: value read
+ */
+
+uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix,
+                       bool debug);
+
+/**
+ * reset a register
+ * @reg: register to reset
+ */
+
+void register_reset(RegisterInfo *reg);
+
+#endif
-- 
2.7.4