[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fau
From: |
Zhen Ning Lim |
Subject: |
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault |
Date: |
Thu, 30 Jun 2016 13:41:06 -0000 |
Hi Mark,
Thanks for the update. I would definitely be nice to have other than the
black screen. Still got a problem though. I managed to install sparc9
but after i removed the cdrom, it fails to boot.
qemu-system-sparc -nographic -monitor null -serial
mon:telnet:0.0.0.0:3000,server -hda ./Sparc9.disk -m 256 -net
nic,macaddr=52:54:0:12:34:56 -net
tap,ifname=tap0,script=no,downscript=no
>From an article written by Artyom, i did add
# cat >> /a/etc/system
set scsi_options=0x58
^d
to solaris 2.6.
However, i think i didnt do this with solaris 8, it works fine.
For the solaris 9, it will allow you to either set it to not reboot but
once you reached the end of the installation, it will reboot when you
press enter. And the Sparc9.disk cannot be booted :(
telnet 0.0.0.0 3000
Trying 0.0.0.0...
Connected to 0.0.0.0.
Escape character is '^]'.
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
Type 'help' for detailed information
Trying disk...
Not a bootable ELF image
Not a bootable a.out image
No valid state has been set by load or init-program
0 >
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328
Title:
Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Status in QEMU:
Fix Committed
Bug description:
Hi,
I tried the following command to boot Solaris 9 sparc:
qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom
sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server
It seems there are a few Segmentation Faults, one from the starting of
the boot. Another at the beginning of the commandline installation.
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
Type 'help' for detailed information
Trying cdrom:d...
Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath:
/address@hidden,10000000/address@hidden,10001000/address@hidden,8400000/address@hidden,8800000/address@hidden,0:d
Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING:
/address@hidden,10000000/address@hidden,10001000/address@hidden,8400000/address@hidden,8800000/address@hidden,0
(sd0):
Corrupt label; wrong magic number
Segmentation Fault
Configuring /dev and /devices
NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c,
Line #1759 0x00 0x88)
audio may not work correctly until it is stopped and restarted
Segmentation Fault
Using RPC Bootparams for network configuration information.
Skipping interface le0
Searching for configuration file(s)...
Search complete.
....
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode
/sbin/disk0_install[109]: 143 Segmentation Fault
/sbin/run_install[130]: 155 Segmentation Fault
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, (continued)
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Zhen Ning Lim, 2016/06/28
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Mark Cave-Ayland, 2016/06/28
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Zhen Ning Lim, 2016/06/29
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Mark Cave-Ayland, 2016/06/29
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Zhen Ning Lim, 2016/06/29
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Mark Cave-Ayland, 2016/06/29
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Zhen Ning Lim, 2016/06/30
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Mark Cave-Ayland, 2016/06/30
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Zhen Ning Lim, 2016/06/30
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault, Zhen Ning Lim, 2016/06/30
- [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault,
Zhen Ning Lim <=