[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64
From: |
Riku Voipio |
Subject: |
Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64 |
Date: |
Thu, 7 Jul 2016 21:49:44 +0300 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Sat, Jul 02, 2016 at 09:12:09PM +0100, Peter Maydell wrote:
> On 2 July 2016 at 17:41, Laurent Vivier <address@hidden> wrote:
> > Sadly, this can't work:
> >
> > sparc/sparc64/cris use sys_select for NR_select AND NR_newselect.
>
> > Not sure all is correct, but it's what I've found:
> >
> > | __NR_select | __NR__newselect
> > ------------+----------------+-----------------+
> > arm | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
> > aarch64 | sys_select | - |
> > ------------+----------------+-----------------+
> > alpha | sys_select | - |
> > ------------+----------------+-----------------+
> > cris | sys_select | sys_select |
> > ------------+----------------+-----------------+
> > m68k | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
> > microblaze | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
> > mips | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
> > mips64 | sys_select | - |
> > ------------+----------------+-----------------+
> > openrisc | sys_select | - |
> > ------------+----------------+-----------------+
> > ppc | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
> > s390x | sys_select | - |
> > ------------+----------------+-----------------+
> > sh4 | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
> > sparc | sys_select | sys_select |
> > ------------+----------------+-----------------+
> > sparc64 | sys_select | sys_select |
> > ------------+----------------+-----------------+
> > tilegx | sys_select | - |
> > ------------+----------------+-----------------+
> > unicore32 | sys_select | - |
> > ------------+----------------+-----------------+
> > x86_64 | sys_select | - |
> > ------------+----------------+-----------------+
> > i386 | sys_old_select | sys_select |
> > ------------+----------------+-----------------+
>
> Hmm. Looking at current Linux git master, I get
> slightly different results. The only architectures which
> define __ARCH_WANT_SYS_OLD_SELECT are:
> arm, m68k, mn10300, x86
> and no others use sys_old_select.
>
> So I think we have the following behaviours:
>
> (1) Define neither NR_select nor NR__newselect
> (and use pselect6 syscall for select):
> aarch64, openrisc, tilegx, unicore32, presumably any future arch
>
> (2) only define NR__newselect, it is new select:
> mips, mips64, sh, s390
>
> (3) Only define NR_select, want that to be new select:
> alpha, x86_64, s390x
>
> (4) NR__newselect is new select, NR_select is old_select:
> i386, m68k, arm if kernel is not CONFIG_AEABI
>
> (5) NR__newselect is new select, NR_select is defined but
> if called returns ENOSYS:
> microblaze, arm if CONFIG_AEABI, ppc64
>
> (6) NR__newselect is new select, NR_select is a bonkers custom
> thing that tries to autodetect the calling convention:
> http://lxr.free-electrons.com/source/arch/powerpc/kernel/syscalls.c#L86
> ppc32 (but only native 32-bit; 32-bit compat support
> on a ppc64 kernel is category 5, so I vote for ignoring
> this weirdness and calling ppc category 5)
>
> (7) NR_select and NR__newselect are different numbers
> but both are new select:
> cris, sparc, sparc64
>
> which is a pretty confusing mess, but I think it equates to:
> (0) if defined, NR__newselect is always new select
> (1) if NR_select is defined, the choices are:
> (a) NR_select is old_select:
> i386, m68k, arm
> (b) NR_select is defined but should ENOSYS:
> microblaze, ppc
> (c) NR_select defined and is new select:
> everything else (alpha, x86-64, s390x, cris, sparc, sparc64)
>
> and I think we should handle that by having the code in syscall.c
> be something like:
>
> #ifdef TARGET_NR_select
> case TARGET_NR_select:
> #if defined(TARGET_WANT_NI_OLD_SELECT)
> /* some architectures used to have old_select here
> * but now ENOSYS it.
> */
> ret = -TARGET_ENOSYS;
> break;
> #elif defined(TARGET_WANT_OLD_SYS_SELECT)
> /* code for old select here; maybe factored out to
> * its own function: ret = do_old_select() ?
> */
> #else
> /* select is new style select */
> ret = do_select(...);
> #endif
> #endif
I agree, this seems to be the best way to fix select properly.
> where TARGET_WANT_NI_OLD_SELECT and
> TARGET_WANT_OLD_SYS_SELECT are #defined in
> linux-user/$(ARCH)/target_syscall.h by those
> architectures that need that behaviour
> (microblaze, ppc for the first; i386, m68k, arm
> for the second).
>
> We could just not define TARGET_NR_select for
> microblaze and ppc, of course, but that might
> be confusing and easily accidentally reverted.
>
> For openrisc, sh and tilegx we incorrectly define
> a TARGET_NR_select which the kernel doesn't, so
> we should delete that from our headers.
>
> I think overall that produces a reasonable separation
> of "what behaviour does my architecture want" from
> the implementation of the various behaviours, and
> means the default will be correct for any architectures
> we add later (only the oddball legacy cases need
> to request special behaviour).
>
> thanks
> -- PMM
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, (continued)
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Peter Maydell, 2016/07/01
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Wirth, Allan, 2016/07/01
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Laurent Vivier, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Peter Maydell, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Laurent Vivier, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Peter Maydell, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Laurent Vivier, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Peter Maydell, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Laurent Vivier, 2016/07/02
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64,
Riku Voipio <=
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Laurent Vivier, 2016/07/07
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Wirth, Allan, 2016/07/07
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Laurent Vivier, 2016/07/07
- Re: [Qemu-devel] [PATCH] linux-user: fix signal() syscall on x86_64, Wirth, Allan, 2016/07/07