[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH for-2.8 14/18] pc: clarify FW_CFG_MAX_CPUS usage com
From: |
Igor Mammedov |
Subject: |
[Qemu-devel] [PATCH for-2.8 14/18] pc: clarify FW_CFG_MAX_CPUS usage comment |
Date: |
Fri, 5 Aug 2016 11:46:13 +0200 |
Signed-off-by: Igor Mammedov <address@hidden>
---
hw/i386/pc.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 1ca5323..c2cd5bd 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -744,17 +744,15 @@ static FWCfgState *bochs_bios_init(AddressSpace *as,
PCMachineState *pcms)
/* FW_CFG_MAX_CPUS is a bit confusing/problematic on x86:
*
- * SeaBIOS needs FW_CFG_MAX_CPUS for CPU hotplug, but the CPU hotplug
- * QEMU<->SeaBIOS interface is not based on the "CPU index", but on the
APIC
- * ID of hotplugged CPUs[1]. This means that FW_CFG_MAX_CPUS is not the
- * "maximum number of CPUs", but the "limit to the APIC ID values SeaBIOS
- * may see".
+ * For machine types prior to 1.8, SeaBIOS needs FW_CFG_MAX_CPUS for
+ * building MPTable, ACPI MADT, ACPI CPU hotplug and ACPI SRAT table,
+ * that tables are based on xAPIC ID and QEMU<->SeaBIOS interface
+ * for CPU hotplug also uses APIC ID and not "CPU index".
+ * This means that FW_CFG_MAX_CPUS is not the "maximum number of CPUs",
+ * but the "limit to the APIC ID values SeaBIOS may see".
*
- * So, this means we must not use max_cpus, here, but the maximum possible
- * APIC ID value, plus one.
- *
- * [1] The only kind of "CPU identifier" used between SeaBIOS and QEMU is
- * the APIC ID, not the "CPU index"
+ * So for compatibility reasons with old BIOSes we are stuck with
+ * "etc/max-cpus" actually being apic_id_limit
*/
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)pcms->apic_id_limit);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
--
2.7.4
- [Qemu-devel] [PATCH for-2.8 05/18] pc: acpi: x2APIC support for MADT table, (continued)
- [Qemu-devel] [PATCH for-2.8 05/18] pc: acpi: x2APIC support for MADT table, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 04/18] linux-headers: update to v4.8-rc1, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 06/18] pc: acpi: x2APIC support for SRAT table, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 08/18] acpi: cphp: force switch to modern cpu hotplug if APIC ID > 254, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 10/18] pc: apic_common: extend APIC ID property to 32bit, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 11/18] pc: apic_common: restore APIC ID to initial ID on reset, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 07/18] acpi: cphp: support x2APIC entry in cpu._MAT, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 09/18] pc: leave max apic_id_limit only in legacy cpu hotplug code, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 12/18] pc: apic_common: reset APIC ID to initial ID when switching into x2APIC mode, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 13/18] pc: kvm_apic: pass APIC ID depending on xAPIC/x2APIC mode, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 14/18] pc: clarify FW_CFG_MAX_CPUS usage comment,
Igor Mammedov <=
- [Qemu-devel] [PATCH for-2.8 16/18] pc: add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 15/18] increase MAX_CPUMASK_BITS from 255 to 288, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 17/18] pc: add 2.8 machine, Igor Mammedov, 2016/08/05
- [Qemu-devel] [PATCH for-2.8 18/18] pc: q35: bump max_cpus to 288, Igor Mammedov, 2016/08/05
- Re: [Qemu-devel] [PATCH for-2.8 00/18] pc: q35: x2APIC support in kvm_apic mode, Chao Gao, 2016/08/08