[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 06/17] monitor: unregister conditional comman
From: |
Marc-André Lureau |
Subject: |
Re: [Qemu-devel] [PATCH v4 06/17] monitor: unregister conditional commands |
Date: |
Tue, 16 Aug 2016 10:34:56 -0400 (EDT) |
Hi
----- Original Message -----
> address@hidden writes:
>
> > From: Marc-André Lureau <address@hidden>
> >
> > The current monitor dispatch codes doesn't know commands that have been
> > filtered out during qmp-commands.hx preprocessing. query-commands
> > doesn't list them either. However, qapi generator doesn't filter them
> > out, and they are listed in the command list.
> >
> > For now, disable the commands that aren't avaible to avoid introducing a
> > regression there when switching to qmp_dispatch() or listing commands
> > from the generated qapi code.
> >
> > Signed-off-by: Marc-André Lureau <address@hidden>
> > ---
> > monitor.c | 23 +++++++++++++++++++++++
> > 1 file changed, 23 insertions(+)
> >
> > diff --git a/monitor.c b/monitor.c
> > index b7ae552..ef946ad 100644
> > --- a/monitor.c
> > +++ b/monitor.c
> > @@ -1008,6 +1008,26 @@ static void qmp_query_qmp_schema(QDict *qdict,
> > QObject **ret_data,
> > *ret_data = qobject_from_json(qmp_schema_json);
> > }
> >
> > +/*
> > + * Those commands are registered unconditionnally by generated
> > + * qmp files. FIXME: Educate the QAPI schema on #ifdef commands.
> > + */
> > +static void qmp_disable_marshal(void)
> > +{
> > +#ifndef CONFIG_SPICE
> > + qmp_disable_command("query-spice");
> > +#endif
> > +#ifndef TARGET_I386
> > + qmp_disable_command("rtc-reset-reinjection");
> > +#endif
> > +#ifndef TARGET_S390X
> > + qmp_disable_command("dump-skeys");
> > +#endif
> > +#ifndef TARGET_ARM
> > + qmp_disable_command("query-gic-capabilities");
> > +#endif
> > +}
> > +
> > static void qmp_init_marshal(void)
> > {
> > qmp_register_command("query-qmp-schema", qmp_query_qmp_schema,
> > @@ -1016,6 +1036,9 @@ static void qmp_init_marshal(void)
> > QCO_NO_OPTIONS);
> > qmp_register_command("netdev_add", qmp_netdev_add,
> > QCO_NO_OPTIONS);
> > +
> > + /* call it after the rest of qapi_init() */
> > + register_module_init(qmp_disable_marshal, MODULE_INIT_QAPI);
> > }
> >
> > qapi_init(qmp_init_marshal);
>
> Let's see whether I understand this patch...
>
> qmp_disable_command() sets a flag that can be tested directly or with
> qmp_command_is_enabled(). do_qmp_dispatch() tests it, and fails the
> command with an "The command FOO has been disabled for this instance"
> error. It's called from qmp_dispatch(), which we're not yet using for
> QMP at this point of the series.
>
> QGA uses this to implement its "freeze whitelist", i.e. to disable all
> commands that aren't known to be safe while filesystems are frozen.
>
> qmp_disable_command() does nothing when the command doesn't exist, which
> I think is the case at this point of the series.
>
> So this patch does exactly nothing by itself. When you later flip
> dispatch to use qmp_dispatch(), it becomes active, and the error for
> these commands changes from
>
> {"error": {"class": "CommandNotFound", "desc": "The command FOO has not
> been found"}}
>
> to
>
> {"error": {"class": "GenericError", "desc": "The command FOO has been
> disabled for this instance"}}
>
> which is fine with me.
>
> Is this basically correct?
I think it's correct, I haven't played much with this as I focused on the
conditional build instead, which is actually not so difficult, see:
https://github.com/elmarco/qemu/commit/d0496fdabe49149e76d765d96feada0d5269c211
(qapi.py change)
https://github.com/elmarco/qemu/commit/ee3c17b7bd5ffaa0b5be258a2cfb46c6c577f653
(per target build)
https://github.com/elmarco/qemu/commit/91a692b3428878f8c26933c8a113853fb2a19970
(per target conditonal in schema)
Do you think I should introduce that conditional build earlier in this series
instead of that disable workaround?
- [Qemu-devel] [PATCH v4 00/17] qapi: remove the 'middle' mode, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 01/17] build-sys: define QEMU_VERSION_{MAJOR, MINOR, MICRO}, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 02/17] qapi-schema: use generated marshaller for 'qmp_capabilities', marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 03/17] qapi-schema: add 'device_add', marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 04/17] monitor: simplify invalid_qmp_mode(), marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 05/17] monitor: register gen:false commands manually, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 06/17] monitor: unregister conditional commands, marcandre . lureau, 2016/08/10
- Re: [Qemu-devel] [PATCH v4 06/17] monitor: unregister conditional commands, Markus Armbruster, 2016/08/17
- [Qemu-devel] [PATCH v4 07/17] qapi: export the marshallers, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 08/17] monitor: use qmp_find_command() (using generated qapi code), marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 09/17] monitor: implement 'qmp_query_commands' without qmp_cmds, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 11/17] qapi: remove the "middle" mode, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 10/17] monitor: remove mhandler.cmd_new, marcandre . lureau, 2016/08/10
- [Qemu-devel] [PATCH v4 12/17] qapi: check invalid arguments on no-args commands, marcandre . lureau, 2016/08/10