[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v10 13/16] qemu-iotests: Test overlapping stream and
From: |
Alberto Garcia |
Subject: |
[Qemu-devel] [PATCH v10 13/16] qemu-iotests: Test overlapping stream and commit operations |
Date: |
Thu, 6 Oct 2016 16:02:56 +0300 |
These test cases check that it's not possible to perform two
block-stream or block-commit operations if there are nodes involved in
both.
Signed-off-by: Alberto Garcia <address@hidden>
---
tests/qemu-iotests/030 | 89 ++++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/030.out | 4 +--
2 files changed, 91 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index e487473..e3bded8 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -228,6 +228,95 @@ class TestParallelOps(iotests.QMPTestCase):
qemu_io('-f', iotests.imgfmt, '-c', 'map',
self.imgs[i-1]),
'image file map does not match backing file after
streaming')
+ # Test that it's not possible to perform two block-stream
+ # operations if there are nodes involved in both.
+ def test_overlapping_1(self):
+ self.assert_no_active_block_jobs()
+
+ # Set a speed limit to make sure that this job blocks the rest
+ result = self.vm.qmp('block-stream', device='node4',
job_id='stream-node4', base=self.imgs[1], speed=1024*1024)
+ self.assert_qmp(result, 'return', {})
+
+ result = self.vm.qmp('block-stream', device='node5',
job_id='stream-node5', base=self.imgs[2])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ result = self.vm.qmp('block-stream', device='node3',
job_id='stream-node3', base=self.imgs[2])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ result = self.vm.qmp('block-stream', device='node4',
job_id='stream-node4-v2')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ # block-commit should also fail if it touches nodes used by the stream
job
+ result = self.vm.qmp('block-commit', device='drive0',
base=self.imgs[4], job_id='commit-node4')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ result = self.vm.qmp('block-commit', device='drive0',
base=self.imgs[1], top=self.imgs[3], job_id='commit-node1')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ # This fails because it needs to modify the backing string in node2,
which is blocked
+ result = self.vm.qmp('block-commit', device='drive0',
base=self.imgs[0], top=self.imgs[1], job_id='commit-node0')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ self.wait_until_completed(drive='stream-node4')
+ self.assert_no_active_block_jobs()
+
+ # Similar to test_overlapping_1, but with block-commit
+ # blocking the other jobs
+ def test_overlapping_2(self):
+ self.assertLessEqual(9, self.num_imgs)
+ self.assert_no_active_block_jobs()
+
+ # Set a speed limit to make sure that this job blocks the rest
+ result = self.vm.qmp('block-commit', device='drive0',
top=self.imgs[5], base=self.imgs[3], job_id='commit-node3', speed=1024*1024)
+ self.assert_qmp(result, 'return', {})
+
+ result = self.vm.qmp('block-stream', device='node3',
job_id='stream-node3')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ result = self.vm.qmp('block-stream', device='node6',
base=self.imgs[2], job_id='stream-node6')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ result = self.vm.qmp('block-stream', device='node4',
base=self.imgs[2], job_id='stream-node4')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ result = self.vm.qmp('block-stream', device='node6',
base=self.imgs[4], job_id='stream-node6-v2')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ # This fails because block-commit needs to block node6, the overlay of
the 'top' image
+ result = self.vm.qmp('block-stream', device='node7',
base=self.imgs[5], job_id='stream-node6-v3')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ # This fails because block-commit currently blocks the active layer
even if it's not used
+ result = self.vm.qmp('block-stream', device='drive0',
base=self.imgs[5], job_id='stream-drive0')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ self.wait_until_completed(drive='commit-node3')
+
+ # Similar to test_overlapping_2, but here block-commit doesn't use the
'top' parameter.
+ # Internally this uses a mirror block job, hence the separate test case.
+ def test_overlapping_3(self):
+ self.assertLessEqual(8, self.num_imgs)
+ self.assert_no_active_block_jobs()
+
+ # Set a speed limit to make sure that this job blocks the rest
+ result = self.vm.qmp('block-commit', device='drive0',
base=self.imgs[3], job_id='commit-drive0', speed=1024*1024)
+ self.assert_qmp(result, 'return', {})
+
+ result = self.vm.qmp('block-stream', device='node5',
base=self.imgs[3], job_id='stream-node6')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
+ event = self.vm.get_qmp_event(wait=True)
+ self.assertEqual(event['event'], 'BLOCK_JOB_READY')
+ self.assert_qmp(event, 'data/device', 'commit-drive0')
+ self.assert_qmp(event, 'data/type', 'commit')
+ self.assert_qmp_absent(event, 'data/error')
+
+ result = self.vm.qmp('block-job-complete', device='commit-drive0')
+ self.assert_qmp(result, 'return', {})
+
+ self.wait_until_completed(drive='commit-drive0')
+ self.assert_no_active_block_jobs()
+
class TestSmallerBackingFile(iotests.QMPTestCase):
backing_len = 1 * 1024 * 1024 # MB
image_len = 2 * backing_len
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index b6f2576..4176bb9 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-................
+...................
----------------------------------------------------------------------
-Ran 16 tests
+Ran 19 tests
OK
--
2.9.3
- Re: [Qemu-devel] [PATCH v10 03/16] block: Use block_job_add_bdrv() in mirror_start_job(), (continued)
[Qemu-devel] [PATCH v10 04/16] block: Use block_job_add_bdrv() in backup_start(), Alberto Garcia, 2016/10/06
[Qemu-devel] [PATCH v10 16/16] qemu-iotests: Test streaming to a Quorum child, Alberto Garcia, 2016/10/06
[Qemu-devel] [PATCH v10 10/16] docs: Document how to stream to an intermediate layer, Alberto Garcia, 2016/10/06
[Qemu-devel] [PATCH v10 15/16] qemu-iotests: Add iotests.supports_quorum(), Alberto Garcia, 2016/10/06
[Qemu-devel] [PATCH v10 13/16] qemu-iotests: Test overlapping stream and commit operations,
Alberto Garcia <=
[Qemu-devel] [PATCH v10 12/16] qemu-iotests: Test block-stream operations in parallel, Alberto Garcia, 2016/10/06
[Qemu-devel] [PATCH v10 14/16] qemu-iotests: Test block-stream and block-commit in parallel, Alberto Garcia, 2016/10/06
[Qemu-devel] [PATCH v10 11/16] qemu-iotests: Test streaming to an intermediate layer, Alberto Garcia, 2016/10/06