[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH for-2.9 00/30] Aspeed SoC fixes and model improvemen

From: Cédric Le Goater
Subject: [Qemu-devel] [PATCH for-2.9 00/30] Aspeed SoC fixes and model improvements
Date: Tue, 29 Nov 2016 16:43:38 +0100

Here is a collection of fixes and improvements on existing models for
the Aspeed SoCs

 * Block
   - add a 'model' option to -drive for MTD devices  

 * SoC level 
   - an AST2400 A1 SoC for the Palmetto machine
   - a new Romulus machine  
   - a SRAM region (which is used at early boot in U-Boot, serves as a
     stack, and by DRAM calibration)

 * SMC (Flash controller) 
   - Command mode support. Flash contents is accessed directly on the
     AHB bus   
   - DMA support
   - dummy bytes
   - auto strapping of configuration for boot flash
   - use CS0 as a boot ROM. Today, qemu can not boot from a MMIO region.
     As this is complex to do (TCG layer modification), we use a ROM
     region in which we copy the flash contents. Hopefully, I got it 
     right this time.

 * Watchdog 
   - new model.  
   - not complete but reset under U-Boot and reboot under Linux now



Cédric Le Goater (29):
  target-arm: Add VBAR support to ARM1176 CPUs
  m25p80: add support for the mx66l1g45g
  aspeed: QOMify the CPU object and attach it to the SoC
  aspeed: remove cannot_destroy_with_object_finalize_yet
  aspeed: attach the second SPI controller object to the SoC
  aspeed: extend the board configuration with flash models
  aspeed: add support for the romulus-bmc board
  aspeed: add a memory region for SRAM
  aspeed: add the definitions for the AST2400 A1 SoC
  aspeed: change SoC revision of the palmetto-bmc machine
  aspeed/scu: fix SCU region size
  aspeed/smc: improve segment register support
  aspeed/smc: set the number of flash modules for the FMC controller
  aspeed/smc: rework the prototype of the AspeedSMCFlash helper routines
  aspeed/smc: introduce a aspeed_smc_flash_update_cs() helper
  aspeed/smc: autostrap CE0/1 configuration
  aspeed/smc: handle SPI flash Command mode
  aspeed/smc: extend tests for Command mode
  aspeed/smc: unfold the AspeedSMCController array
  aspeed/smc: add a 'sdram_base' property
  aspeed/smc: add support for DMAs
  aspeed/smc: handle dummy bytes when doing fast reads
  aspeed/smc: adjust the size of the register region
  aspeed: use first SPI flash as a boot ROM
  block: add a model option for MTD devices
  aspeed/smc: use flash model option
  aspeed: add a watchdog controller
  aspeed/scu: add a aspeed_scu_get_clk() helper
  wdt: aspeed: use scu to get clock freq

Joel Stanley (1):
  wdt: Add Aspeed watchdog device model

 blockdev.c                       |  12 +
 hw/arm/aspeed.c                  | 113 ++++++-
 hw/arm/aspeed_soc.c              | 109 +++++--
 hw/block/m25p80.c                |   1 +
 hw/misc/aspeed_scu.c             |  16 +-
 hw/misc/aspeed_sdmc.c            |   3 +
 hw/ssi/aspeed_smc.c              | 663 +++++++++++++++++++++++++++++++++------
 hw/watchdog/Makefile.objs        |   1 +
 hw/watchdog/wdt_aspeed.c         | 223 +++++++++++++
 include/hw/arm/aspeed_soc.h      |   6 +-
 include/hw/misc/aspeed_scu.h     |   2 +
 include/hw/ssi/aspeed_smc.h      |   8 +-
 include/hw/watchdog/wdt_aspeed.h |  43 +++
 include/sysemu/blockdev.h        |   1 +
 qemu-options.hx                  |   4 +-
 target-arm/cpu.c                 |   6 +
 target-arm/cpu.h                 |   1 +
 target-arm/helper.c              |  24 +-
 tests/m25p80-test.c              |  86 +++++
 19 files changed, 1197 insertions(+), 125 deletions(-)
 create mode 100644 hw/watchdog/wdt_aspeed.c
 create mode 100644 include/hw/watchdog/wdt_aspeed.h


reply via email to

[Prev in Thread] Current Thread [Next in Thread]