qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] vfio/pci-quirks.c: Disable stolen memory for ig


From: Alex Williamson
Subject: Re: [Qemu-devel] [PATCH] vfio/pci-quirks.c: Disable stolen memory for igd VFIO
Date: Mon, 20 Feb 2017 13:15:41 -0700

On Mon, 20 Feb 2017 19:42:54 +0800
Xiong Zhang <address@hidden> wrote:

> From: XiongZhang <address@hidden>
> 
> If IGD isn't assigned at 00:02.0 in UPT and host bios enable stolen
> memory, seabios won't reseave stolen memory in E820 for guest. Then
> both Intel graphic driver and others in guest could use stolen
> memory, this will generate system hang. So we should disable stolen
> memory in this case.

Wasn't the intent of UPT mode that it removed all of the BIOS and
chipset dependencies of IGD such that it could be assigned as just
another PCI device?  Does this mean that the drivers fail to meet that
promise by evaluating the size and location of stolen memory as
programmed on the physical device even in UPT mode?

I'm a little confused by the use of the term "others" here and in the
comment below.  Can you be more specific what other software beyond the
graphics driver is evaluating the size or location of stolen memory?
 
> Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=99028
>          https://bugs.freedesktop.org/show_bug.cgi?id=99025
> 
> Signed-off-by: Xiong Zhang <address@hidden>
> Tested-by: Terrence Xu <address@hidden>
> ---
>  hw/vfio/pci-quirks.c | 63 
> ++++++++++++++++++++++++++++++----------------------
>  1 file changed, 36 insertions(+), 27 deletions(-)
> 
> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> index 1e97bc4..015d0c2 100644
> --- a/hw/vfio/pci-quirks.c
> +++ b/hw/vfio/pci-quirks.c
> @@ -1364,14 +1364,43 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice 
> *vdev, int nr)
>      uint32_t gmch;
>      uint16_t cmd_orig, cmd;
>  
> +    /* This must be an Intel VGA device. */
> +    if (!vfio_pci_is(vdev, PCI_VENDOR_ID_INTEL, PCI_ANY_ID) ||
> +        !vfio_is_vga(vdev) || nr != 4) {
> +        return;
> +    }
> +
>      /*
> -     * This must be an Intel VGA device at address 00:02.0 for us to even
> -     * consider enabling legacy mode.  The vBIOS has dependencies on the
> -     * PCI bus address.
> +     * IGD is not a standard, they like to change their specs often.  We
> +     * only attempt to support back to SandBridge and we hope that newer
> +     * devices maintain compatibility with generation 8.
>       */
> -    if (!vfio_pci_is(vdev, PCI_VENDOR_ID_INTEL, PCI_ANY_ID) ||
> -        !vfio_is_vga(vdev) || nr != 4 ||
> -        &vdev->pdev != pci_find_device(pci_device_root_bus(&vdev->pdev),
> +    gen = igd_gen(vdev);
> +    if (gen != 6 && gen != 8) {
> +        error_report("IGD device %s is unsupported in legacy mode, "
> +                     "try SandyBridge or newer", vdev->vbasedev.name);

This is a little bit misleading now since this is no longer exclusively
a legacy mode path, a user trying to use UPT mode might disregard this
as noise.  Perhaps...

    error_report("IGD device %s is unsupported by IGD quirks, "
                 "try SandyBridge or newer", vdev->vbasedev.name);


> +        return;
> +    }
> +    /*
> +     * If this isn't at address 00:02.0, bios won't reserv stolen

s/reserv/reserve/

> +     * memory in E820, then others could use stolen memory. If guest
> +     * graphic driver still use stolen memory, system maybe hang.
> +     * so we set stolen memory size to 0 and guest graphic driver won't
> +     * use stolen memory.

Based on my understanding of the bug, I might suggest:

  Regardless of running in UPT or legacy mode, the guest graphics
  driver may attempt to use stolen memory, however only legacy mode has
  BIOS support for reserving stolen memory in the guest VM.  Emulate
  the GMCH register in all cases and zero out the stolen memory size
  here.  Legacy mode may request allocation and re-write this below.

> +     */
> +    gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, 4);
> +    gmch &= ~((gen < 8 ? 0x1f : 0xff) << (gen < 8 ? 3 : 8));
> +
> +    /* GMCH is read-only, emulated */
> +    pci_set_long(vdev->pdev.config + IGD_GMCH, gmch);
> +    pci_set_long(vdev->pdev.wmask + IGD_GMCH, 0);
> +    pci_set_long(vdev->emulated_config_bits + IGD_GMCH, ~0);
> +
> +    /*
> +     * This must be at address 00:02.0 for us to even onsider enabling
> +     * legacy mode.  The vBIOS has dependencies on the PCI bus address.
> +     */
> +    if (&vdev->pdev != pci_find_device(pci_device_root_bus(&vdev->pdev),
>                                         0, PCI_DEVFN(0x2, 0))) {
>          return;
>      }
> @@ -1391,18 +1420,6 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice 
> *vdev, int nr)
>      }
>  
>      /*
> -     * IGD is not a standard, they like to change their specs often.  We
> -     * only attempt to support back to SandBridge and we hope that newer
> -     * devices maintain compatibility with generation 8.
> -     */
> -    gen = igd_gen(vdev);
> -    if (gen != 6 && gen != 8) {
> -        error_report("IGD device %s is unsupported in legacy mode, "
> -                     "try SandyBridge or newer", vdev->vbasedev.name);
> -        return;
> -    }
> -
> -    /*
>       * Most of what we're doing here is to enable the ROM to run, so if
>       * there's no ROM, there's no point in setting up this quirk.
>       * NB. We only seem to get BIOS ROMs, so a UEFI VM would need CSM 
> support.
> @@ -1457,8 +1474,6 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice 
> *vdev, int nr)
>          goto out;
>      }
>  
> -    gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, 4);
> -
>      /*
>       * If IGD VGA Disable is clear (expected) and VGA is not already enabled,
>       * try to enable it.  Probably shouldn't be using legacy mode without 
> VGA,
> @@ -1526,12 +1541,11 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice 
> *vdev, int nr)
>       * when IVD (IGD VGA Disable) is clear, but the claim is that it's 
> unused,
>       * so let's not waste VM memory for it.
>       */
> -    gmch &= ~((gen < 8 ? 0x1f : 0xff) << (gen < 8 ? 3 : 8));
> -
>      if (vdev->igd_gms) {
>          if (vdev->igd_gms <= 0x10) {
>              gms_mb = vdev->igd_gms * 32;
>              gmch |= vdev->igd_gms << (gen < 8 ? 3 : 8);
> +            pci_set_long(vdev->pdev.config + IGD_GMCH, gmch);
>          } else {
>              error_report("Unsupported IGD GMS value 0x%x", vdev->igd_gms);
>              vdev->igd_gms = 0;
> @@ -1551,11 +1565,6 @@ static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice 
> *vdev, int nr)
>      fw_cfg_add_file(fw_cfg_find(), "etc/igd-bdsm-size",
>                      bdsm_size, sizeof(*bdsm_size));
>  
> -    /* GMCH is read-only, emulated */
> -    pci_set_long(vdev->pdev.config + IGD_GMCH, gmch);
> -    pci_set_long(vdev->pdev.wmask + IGD_GMCH, 0);
> -    pci_set_long(vdev->emulated_config_bits + IGD_GMCH, ~0);
> -
>      /* BDSM is read-write, emulated.  The BIOS needs to be able to write it 
> */
>      pci_set_long(vdev->pdev.config + IGD_BDSM, 0);
>      pci_set_long(vdev->pdev.wmask + IGD_BDSM, ~0);




reply via email to

[Prev in Thread] Current Thread [Next in Thread]