[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 40/51] ram: Rename qemu_target_page_bits() to qe
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH 40/51] ram: Rename qemu_target_page_bits() to qemu_target_page_size() |
Date: |
Thu, 30 Mar 2017 09:55:46 +0100 |
User-agent: |
Mutt/1.8.0 (2017-02-23) |
* Peter Xu (address@hidden) wrote:
> On Thu, Mar 23, 2017 at 09:45:33PM +0100, Juan Quintela wrote:
> > It was used as a size in all cases except one.
>
> Considering that:
>
> - qemu_target_page_bits() is only used in migration codes, in only
> several places below
>
> - migration codes is using TARGET_PAGE_{BITS|SIZE} a lot as well
>
> How about we just remove this function, and directly use
> TARGET_PAGE_{BITS|SIZE}?
We can't because the TARGET_* macros are defined in headers
that are only allowed to be included in target-specific builds.
Most of QEMUs code (including all migration/*) is built
target independent and so the headers error if we try and include
them.
That's why I added qemu_target_page_bits()
Dave
> Thanks,
>
> >
> > Signed-off-by: Juan Quintela <address@hidden>
> > ---
> > exec.c | 4 ++--
> > include/sysemu/sysemu.h | 2 +-
> > migration/migration.c | 4 ++--
> > migration/postcopy-ram.c | 8 ++++----
> > migration/savevm.c | 8 ++++----
> > 5 files changed, 13 insertions(+), 13 deletions(-)
> >
> > diff --git a/exec.c b/exec.c
> > index e57a8a2..9a4c385 100644
> > --- a/exec.c
> > +++ b/exec.c
> > @@ -3349,9 +3349,9 @@ int cpu_memory_rw_debug(CPUState *cpu, target_ulong
> > addr,
> > * Allows code that needs to deal with migration bitmaps etc to still be
> > built
> > * target independent.
> > */
> > -size_t qemu_target_page_bits(void)
> > +size_t qemu_target_page_size(void)
> > {
> > - return TARGET_PAGE_BITS;
> > + return TARGET_PAGE_SIZE;
> > }
> >
> > #endif
> > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> > index 576c7ce..16175f7 100644
> > --- a/include/sysemu/sysemu.h
> > +++ b/include/sysemu/sysemu.h
> > @@ -67,7 +67,7 @@ int qemu_reset_requested_get(void);
> > void qemu_system_killed(int signal, pid_t pid);
> > void qemu_system_reset(bool report);
> > void qemu_system_guest_panicked(GuestPanicInformation *info);
> > -size_t qemu_target_page_bits(void);
> > +size_t qemu_target_page_size(void);
> >
> > void qemu_add_exit_notifier(Notifier *notify);
> > void qemu_remove_exit_notifier(Notifier *notify);
> > diff --git a/migration/migration.c b/migration/migration.c
> > index 3f99ab3..92c3c6b 100644
> > --- a/migration/migration.c
> > +++ b/migration/migration.c
> > @@ -646,7 +646,7 @@ static void populate_ram_info(MigrationInfo *info,
> > MigrationState *s)
> > info->ram->skipped = 0;
> > info->ram->normal = norm_mig_pages_transferred();
> > info->ram->normal_bytes = norm_mig_pages_transferred() *
> > - (1ul << qemu_target_page_bits());
> > + qemu_target_page_size();
> > info->ram->mbps = s->mbps;
> > info->ram->dirty_sync_count = ram_dirty_sync_count();
> > info->ram->postcopy_requests = ram_postcopy_requests();
> > @@ -2001,7 +2001,7 @@ static void *migration_thread(void *opaque)
> > 10000 is a small enough number for our purposes */
> > if (ram_dirty_pages_rate() && transferred_bytes > 10000) {
> > s->expected_downtime = ram_dirty_pages_rate() *
> > - (1ul << qemu_target_page_bits()) / bandwidth;
> > + qemu_target_page_size() / bandwidth;
> > }
> >
> > qemu_file_reset_rate_limit(s->to_dst_file);
> > diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
> > index dc80dbb..8756364 100644
> > --- a/migration/postcopy-ram.c
> > +++ b/migration/postcopy-ram.c
> > @@ -123,7 +123,7 @@ bool postcopy_ram_supported_by_host(void)
> > struct uffdio_range range_struct;
> > uint64_t feature_mask;
> >
> > - if ((1ul << qemu_target_page_bits()) > pagesize) {
> > + if (qemu_target_page_size() > pagesize) {
> > error_report("Target page size bigger than host page size");
> > goto out;
> > }
> > @@ -745,10 +745,10 @@ PostcopyDiscardState
> > *postcopy_discard_send_init(MigrationState *ms,
> > void postcopy_discard_send_range(MigrationState *ms, PostcopyDiscardState
> > *pds,
> > unsigned long start, unsigned long length)
> > {
> > - size_t tp_bits = qemu_target_page_bits();
> > + size_t tp_size = qemu_target_page_size();
> > /* Convert to byte offsets within the RAM block */
> > - pds->start_list[pds->cur_entry] = (start - pds->offset) << tp_bits;
> > - pds->length_list[pds->cur_entry] = length << tp_bits;
> > + pds->start_list[pds->cur_entry] = (start - pds->offset) * tp_size;
> > + pds->length_list[pds->cur_entry] = length * tp_size;
> > trace_postcopy_discard_send_range(pds->ramblock_name, start, length);
> > pds->cur_entry++;
> > pds->nsentwords++;
> > diff --git a/migration/savevm.c b/migration/savevm.c
> > index 853a81a..bbf055d 100644
> > --- a/migration/savevm.c
> > +++ b/migration/savevm.c
> > @@ -871,7 +871,7 @@ void qemu_savevm_send_postcopy_advise(QEMUFile *f)
> > {
> > uint64_t tmp[2];
> > tmp[0] = cpu_to_be64(ram_pagesize_summary());
> > - tmp[1] = cpu_to_be64(1ul << qemu_target_page_bits());
> > + tmp[1] = cpu_to_be64(qemu_target_page_size());
> >
> > trace_qemu_savevm_send_postcopy_advise();
> > qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 16, (uint8_t
> > *)tmp);
> > @@ -1390,13 +1390,13 @@ static int
> > loadvm_postcopy_handle_advise(MigrationIncomingState *mis)
> > }
> >
> > remote_tps = qemu_get_be64(mis->from_src_file);
> > - if (remote_tps != (1ul << qemu_target_page_bits())) {
> > + if (remote_tps != qemu_target_page_size()) {
> > /*
> > * Again, some differences could be dealt with, but for now keep it
> > * simple.
> > */
> > - error_report("Postcopy needs matching target page sizes (s=%d
> > d=%d)",
> > - (int)remote_tps, 1 << qemu_target_page_bits());
> > + error_report("Postcopy needs matching target page sizes (s=%d
> > d=%zd)",
> > + (int)remote_tps, qemu_target_page_size());
> > return -1;
> > }
> >
> > --
> > 2.9.3
> >
> >
>
> -- peterx
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [Qemu-devel] [PATCH 36/51] ram: Move QEMUFile into RAMState, (continued)
- [Qemu-devel] [PATCH 36/51] ram: Move QEMUFile into RAMState, Juan Quintela, 2017/03/23
- [Qemu-devel] [PATCH 37/51] ram: Move compression_switch to RAMState, Juan Quintela, 2017/03/23
- [Qemu-devel] [PATCH 39/51] ram: We don't need MigrationState parameter anymore, Juan Quintela, 2017/03/23
- [Qemu-devel] [PATCH 40/51] ram: Rename qemu_target_page_bits() to qemu_target_page_size(), Juan Quintela, 2017/03/23
- [Qemu-devel] [PATCH 41/51] Add page-size to output in 'info migrate', Juan Quintela, 2017/03/23
- [Qemu-devel] [PATCH 42/51] ram: Pass RAMBlock to bitmap_sync, Juan Quintela, 2017/03/23