[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] ARM virt machine boots fail with 14 ioh3420

From: Shannon Zhao
Subject: Re: [Qemu-devel] ARM virt machine boots fail with 14 ioh3420
Date: Fri, 14 Apr 2017 10:41:21 +0800
User-agent: Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.4.0

Hi Laszlo,

Thanks a lot for your reply:)

On 2017/4/14 1:09, Laszlo Ersek wrote:
> Adding Andrea, Ard, Drew and Marcel; and the main qemu list
> On 04/13/17 09:37, Shannon Zhao wrote:
>> Hi,
>> I'm testing the PCIe devices hotplug for ARM virt machine and using
>> ioh3420 as root port. I found that below command line could work.
>> qemu-system-aarch64 -machine virt,accel=kvm,usb=off -cpu host -bios
>> QEMU_EFI.fd -m 12288 -smp 8,sockets=8,cores=1,threads=1  -device
>> ioh3420,port=0x8,chassis=1,id=pci.1,bus=pcie.0,addr=0x1 -device
>> ioh3420,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x2 -device
>> ioh3420,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x3 -device
>> ioh3420,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x4 -device
>> ioh3420,port=0xc,chassis=5,id=pci.5,bus=pcie.0,addr=0x5 -device
>> ioh3420,port=0xd,chassis=6,id=pci.6,bus=pcie.0,addr=0x6 -device
>> ioh3420,port=0xe,chassis=7,id=pci.7,bus=pcie.0,addr=0x7 -device
>> ioh3420,port=0xf,chassis=8,id=pci.8,bus=pcie.0,addr=0x8 -device
>> ioh3420,port=0x10,chassis=9,id=pci.9,bus=pcie.0,addr=0x9 -device
>> ioh3420,port=0x11,chassis=10,id=pci.10,bus=pcie.0,addr=0xa -device
>> ioh3420,port=0x12,chassis=11,id=pci.11,bus=pcie.0,addr=0xb -device
>> ioh3420,port=0x13,chassis=12,id=pci.12,bus=pcie.0,addr=0xc -device
>> ioh3420,port=0x14,chassis=13,id=pci.13,bus=pcie.0,addr=0xd -device
>> i82801b11-bridge,id=pci.17,bus=pcie.0,addr=0x11 -device
>> pci-bridge,chassis_nr=18,id=pci.18,bus=pci.17,addr=0x0 -device
>> usb-ehci,id=usb,bus=pci.18,addr=0x1 -device
>> virtio-scsi-pci,id=scsi0,bus=pci.1,addr=0x0,disable-legacy=on,disable-modern=off
>> -drive
>> file=/mnt/sdb/guest.raw,format=raw,if=none,id=drive-scsi0-0-0-0,cache=none,aio=native
>> -device
>> scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
>> -netdev tap,id=hostnet1,vhost=on -device
>> virtio-net-pci,netdev=hostnet1,id=net1,mac=00:16:3e:2b:cc:e1,bus=pci.2,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet2,vhost=on -device
>> virtio-net-pci,netdev=hostnet2,id=net2,mac=00:16:3e:22:29:80,bus=pci.3,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet3,vhost=on -device
>> virtio-net-pci,netdev=hostnet3,id=net3,mac=00:16:3e:28:07:9a,bus=pci.4,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet4,vhost=on -device
>> virtio-net-pci,netdev=hostnet4,id=net4,mac=00:16:3e:3d:cd:b6,bus=pci.5,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet5,vhost=on -device
>> virtio-net-pci,netdev=hostnet5,id=net5,mac=00:16:3e:64:9f:b0,bus=pci.6,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet6,vhost=on -device
>> virtio-net-pci,netdev=hostnet6,id=net6,mac=00:16:3e:33:5b:d3,bus=pci.7,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet7,vhost=on -device
>> virtio-net-pci,netdev=hostnet7,id=net7,mac=00:16:3e:39:7c:df,bus=pci.8,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet8,vhost=on -device
>> virtio-net-pci,netdev=hostnet8,id=net8,mac=00:16:3e:0a:c1:4e,bus=pci.9,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet9,vhost=on -device
>> virtio-net-pci,netdev=hostnet9,id=net9,mac=00:16:3e:0a:58:a6,bus=pci.10,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet10,vhost=on -device
>> virtio-net-pci,netdev=hostnet10,id=net10,mac=00:16:3e:35:b5:80,bus=pci.11,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet11,vhost=on -device
>> virtio-net-pci,netdev=hostnet11,id=net11,mac=00:16:3e:4d:b5:bb,bus=pci.12,addr=0x0,disable-legacy=on,disable-modern=off
>> -netdev tap,id=hostnet12,vhost=on -device
>> virtio-net-pci,netdev=hostnet12,id=net12,mac=00:16:3e:3b:69:e9,bus=pci.13,addr=0x0,disable-legacy=on,disable-modern=off
>> -nographic
>> But if I add one more ioh3420 device by appending above command with
>> "-device ioh3420,port=0x15,chassis=14,id=pci.14,bus=pcie.0,addr=0xe",
>> the guest can't boot. It seems that the firmware doesn't recognize the
>> PCIe devices and print "Connect: PciRoot(0x0): Not Found".
>> I'm using QEMU 2.8.1 and edk2 at commit 36a0d5c. Is there any limitation
>> of the supported PCIe devices?
> In one sentence: you are running out of (emulated) IO space.
> Aarch64 does not have "IO space", but with QEMU, using the "virt"
> machine type, we emulate 64KB of IO space, mapped to a special MMIO
> range. This is available for PCI resource allocation, for such devices
> that have IO BARs (and for such PCI bridges that reserve IO space for
> hotplug purposes).
> The ioh3420 PCI Express Root Port device represents such a bridge. Even
> if you plug a PCI Express device into it that has only MMIO BARs, the
> bridge still advertises IO support, and it causes the firmware (and/or
> Linux) to reserve 4KB of IO space. With ~15-16 such ports, you run out
> of the 64 KB IO aperture, and the resource assignment fails.
So currently if we want to support more than ~15 virtio-net-pci devices,
they can't connect to root port. They should connect to pcie root bus
directly, right? But this will not support hot-plug/remove.

BTW, I think even though the qemu assign more than ~15 root port, I
think the firmware should enable the first 15 ports and continue to work
instead of failing with silence.

> The solution to this problem comes together from several parts:
> (1) New, vendor-independent device models in QEMU, for PCI Express Root
> Ports and Downstream Ports, that (optionally) do not advertise any
> support at all for IO BARs. This is on Marcel's task list. Please refer to:
>   generic port device model:
>     https://bugzilla.redhat.com/show_bug.cgi?id=1390316
I see this is in upstream qemu.

>   optional disablement of IO space:
>     https://bugzilla.redhat.com/show_bug.cgi?id=1344299
Marcel, what's the status of this feature?

> (2) A similar question exists for MMIO space. While there the issue
> isn't exactly "running out of available aperture", we still want to
> control the MMIO reservation size for root ports and downstream ports --
> different devices that are to be hot-plugged can require different
> reservations in advance. For this, please refer to:
>   sizing of MMIO reservation:
>     https://bugzilla.redhat.com/show_bug.cgi?id=1437113
> (3) In the firmware, platform code can control the aperture reservation
> of bridges, for hotplug purposes, while the generic PCI Bus driver
> enumerates devices and assigns resources. The driver that does this is
>   OvmfPkg/PciHotPlugInitDxe
> At the moment, this driver is only included in OVMF, not in ArmVirtQemu.
> Plus, it doesn't really do the right thing in OVMF either.
> Once items (1) and (2) above are solved, I will update PciHotPlugInitDxe
> so that it adheres to the reservation sizes dictated by QEMU. For this,
> please refer to:
>   adhere to IO reservation disablement:
>     https://bugzilla.redhat.com/show_bug.cgi?id=1434740
>     (depends on BZ#1344299 above)
>   adhere to MMIO reservation sizing:
>     https://bugzilla.redhat.com/show_bug.cgi?id=1434747
>     (depends on BZ#1437113 above)
> We plan to work on these items in the following months (upstream first,
> obviously).
> --*--
> Please read the following document in the QEMU source tree:
>   docs/pcie.txt
> It will give you the "grand vision" we have for PCI Express on the Q35
> (x86) machine type, and most of that -- intentionally! -- applies to the
> "virt" (aarch64) machine type as well.
> See also the following QEMU commits (especially the second one):
>   9ca019c1dd57 q35: Improve sample configuration files
>   166d434685ed mach-virt: Provide sample configuration files
> Thanks!
> Laszlo
> .


reply via email to

[Prev in Thread] Current Thread [Next in Thread]