[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 42/58] blkdebug: Add pass-through write_zero and disc
From: |
Kevin Wolf |
Subject: |
[Qemu-devel] [PULL 42/58] blkdebug: Add pass-through write_zero and discard support |
Date: |
Thu, 11 May 2017 16:32:45 +0200 |
From: Eric Blake <address@hidden>
In order to test the effects of artificial geometry constraints
on operations like write zero or discard, we first need blkdebug
to manage these actions. It also allows us to inject errors on
those operations, just like we can for read/write/flush.
We can also test the contract promised by the block layer; namely,
if a device has specified limits on alignment or maximum size,
then those limits must be obeyed (for now, the blkdebug driver
merely inherits limits from whatever it is wrapping, but the next
patch will further enhance it to allow specific limit overrides).
This patch intentionally refuses to service requests smaller than
the requested alignments; this is because an upcoming patch adds
a qemu-iotest to prove that the block layer is correctly handling
fragmentation, but the test only works if there is a way to tell
the difference at artificial alignment boundaries when blkdebug is
using a larger-than-default alignment. If we let the blkdebug
layer always defer to the underlying layer, which potentially has
a smaller granularity, the iotest will be thwarted.
Tested by setting up an NBD server with export 'foo', then invoking:
$ ./qemu-io
qemu-io> open -o driver=blkdebug blkdebug::nbd://localhost:10809/foo
qemu-io> d 0 15M
qemu-io> w -z 0 15M
Pre-patch, the server never sees the discard (it was silently
eaten by the block layer); post-patch it is passed across the
wire. Likewise, pre-patch the write is always passed with
NBD_WRITE (with 15M of zeroes on the wire), while post-patch
it can utilize NBD_WRITE_ZEROES (for less traffic).
Signed-off-by: Eric Blake <address@hidden>
Reviewed-by: Max Reitz <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
block/blkdebug.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/block/blkdebug.c b/block/blkdebug.c
index 554573f..b8cc876 100644
--- a/block/blkdebug.c
+++ b/block/blkdebug.c
@@ -1,6 +1,7 @@
/*
* Block protocol for I/O error injection
*
+ * Copyright (C) 2016-2017 Red Hat, Inc.
* Copyright (c) 2010 Kevin Wolf <address@hidden>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
@@ -382,6 +383,11 @@ static int blkdebug_open(BlockDriverState *bs, QDict
*options, int flags,
goto out;
}
+ bs->supported_write_flags = BDRV_REQ_FUA &
+ bs->file->bs->supported_write_flags;
+ bs->supported_zero_flags = (BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
+ bs->file->bs->supported_zero_flags;
+
/* Set request alignment */
align = qemu_opt_get_size(opts, "align", 0);
if (align < INT_MAX && is_power_of_2(align)) {
@@ -494,6 +500,72 @@ static int blkdebug_co_flush(BlockDriverState *bs)
return bdrv_co_flush(bs->file->bs);
}
+static int coroutine_fn blkdebug_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset, int count,
+ BdrvRequestFlags flags)
+{
+ uint32_t align = MAX(bs->bl.request_alignment,
+ bs->bl.pwrite_zeroes_alignment);
+ int err;
+
+ /* Only pass through requests that are larger than requested
+ * preferred alignment (so that we test the fallback to writes on
+ * unaligned portions), and check that the block layer never hands
+ * us anything unaligned that crosses an alignment boundary. */
+ if (count < align) {
+ assert(QEMU_IS_ALIGNED(offset, align) ||
+ QEMU_IS_ALIGNED(offset + count, align) ||
+ DIV_ROUND_UP(offset, align) ==
+ DIV_ROUND_UP(offset + count, align));
+ return -ENOTSUP;
+ }
+ assert(QEMU_IS_ALIGNED(offset, align));
+ assert(QEMU_IS_ALIGNED(count, align));
+ if (bs->bl.max_pwrite_zeroes) {
+ assert(count <= bs->bl.max_pwrite_zeroes);
+ }
+
+ err = rule_check(bs, offset, count);
+ if (err) {
+ return err;
+ }
+
+ return bdrv_co_pwrite_zeroes(bs->file, offset, count, flags);
+}
+
+static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,
+ int64_t offset, int count)
+{
+ uint32_t align = bs->bl.pdiscard_alignment;
+ int err;
+
+ /* Only pass through requests that are larger than requested
+ * minimum alignment, and ensure that unaligned requests do not
+ * cross optimum discard boundaries. */
+ if (count < bs->bl.request_alignment) {
+ assert(QEMU_IS_ALIGNED(offset, align) ||
+ QEMU_IS_ALIGNED(offset + count, align) ||
+ DIV_ROUND_UP(offset, align) ==
+ DIV_ROUND_UP(offset + count, align));
+ return -ENOTSUP;
+ }
+ assert(QEMU_IS_ALIGNED(offset, bs->bl.request_alignment));
+ assert(QEMU_IS_ALIGNED(count, bs->bl.request_alignment));
+ if (align && count >= align) {
+ assert(QEMU_IS_ALIGNED(offset, align));
+ assert(QEMU_IS_ALIGNED(count, align));
+ }
+ if (bs->bl.max_pdiscard) {
+ assert(count <= bs->bl.max_pdiscard);
+ }
+
+ err = rule_check(bs, offset, count);
+ if (err) {
+ return err;
+ }
+
+ return bdrv_co_pdiscard(bs->file->bs, offset, count);
+}
static void blkdebug_close(BlockDriverState *bs)
{
@@ -748,6 +820,8 @@ static BlockDriver bdrv_blkdebug = {
.bdrv_co_preadv = blkdebug_co_preadv,
.bdrv_co_pwritev = blkdebug_co_pwritev,
.bdrv_co_flush_to_disk = blkdebug_co_flush,
+ .bdrv_co_pwrite_zeroes = blkdebug_co_pwrite_zeroes,
+ .bdrv_co_pdiscard = blkdebug_co_pdiscard,
.bdrv_debug_event = blkdebug_debug_event,
.bdrv_debug_breakpoint = blkdebug_debug_breakpoint,
--
1.8.3.1
- [Qemu-devel] [PULL 30/58] block: Drop permissions when migration completes, (continued)
- [Qemu-devel] [PULL 30/58] block: Drop permissions when migration completes, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 35/58] nvme: Implement Write Zeroes, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 36/58] blockdev: use drained_begin/end for qmp_block_resize, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 31/58] block: Inactivate parents before children, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 33/58] file-posix: Remove .bdrv_inactivate/invalidate_cache, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 32/58] block: Fix write/resize permissions for inactive images, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 38/58] qemu-io: Switch 'alloc' command to byte-based length, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 40/58] blkdebug: Sanity check block layer guarantees, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 37/58] qemu-io: Improve alignment checks, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 41/58] blkdebug: Refactor error injection, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 42/58] blkdebug: Add pass-through write_zero and discard support,
Kevin Wolf <=
- [Qemu-devel] [PULL 39/58] qemu-io: Switch 'map' output to byte-based reporting, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 43/58] blkdebug: Simplify override logic, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 44/58] blkdebug: Add ability to override unmap geometries, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 47/58] qcow2: Use consistent switch indentation, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 45/58] tests: Add coverage for recent block geometry fixes, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 46/58] qcow2: Nicer variable names in qcow2_update_snapshot_refcount(), Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 48/58] block: Update comments on BDRV_BLOCK_* meanings, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 49/58] qcow2: Correctly report status of preallocated zero clusters, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 50/58] qcow2: Name typedef for cluster type, Kevin Wolf, 2017/05/11
- [Qemu-devel] [PULL 51/58] qcow2: Make distinction between zero cluster types obvious, Kevin Wolf, 2017/05/11