[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 3/3] vhost: iommu: cache static mapping if there
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH 3/3] vhost: iommu: cache static mapping if there is |
Date: |
Fri, 2 Jun 2017 19:51:36 +0300 |
On Fri, Jun 02, 2017 at 07:50:54PM +0800, Peter Xu wrote:
> This patch pre-heat vhost iotlb cache when passthrough mode enabled.
>
> Sometimes, even if user specified iommu_platform for vhost devices,
> IOMMU might still be disabled. One case is passthrough mode in VT-d
> implementation. We can detect this by observing iommu_list. If it's
> empty, it means IOMMU translation is disabled, then we can actually
> pre-heat the translation (it'll be static mapping then) by first
> invalidating all IOTLB, then cache existing memory ranges into vhost
> backend iotlb using 1:1 mapping.
>
> Reviewed-by: Jason Wang <address@hidden>
> Signed-off-by: Peter Xu <address@hidden>
Can't say I like this, this does not help the more important
use-case of dpdk which has a small static mapping but can't
be detected by QEMU. vhost should just heat up whatever's
actually used. Why isn't this enough?
> ---
> hw/virtio/trace-events | 4 +++
> hw/virtio/vhost.c | 66
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 70 insertions(+)
>
> diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
> index 1f7a7c1..54dcbb3 100644
> --- a/hw/virtio/trace-events
> +++ b/hw/virtio/trace-events
> @@ -24,3 +24,7 @@ virtio_balloon_handle_output(const char *name, uint64_t
> gpa) "section name: %s g
> virtio_balloon_get_config(uint32_t num_pages, uint32_t actual) "num_pages:
> %d actual: %d"
> virtio_balloon_set_config(uint32_t actual, uint32_t oldactual) "actual: %d
> oldactual: %d"
> virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon
> target: %"PRIx64" num_pages: %d"
> +
> +# hw/virtio/vhost.c
> +vhost_iommu_commit(void) ""
> +vhost_iommu_static_preheat(void) ""
> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> index 03a46a7..d03d720 100644
> --- a/hw/virtio/vhost.c
> +++ b/hw/virtio/vhost.c
> @@ -27,6 +27,7 @@
> #include "hw/virtio/virtio-access.h"
> #include "migration/blocker.h"
> #include "sysemu/dma.h"
> +#include "trace.h"
>
> /* enabled until disconnected backend stabilizes */
> #define _VHOST_DEBUG 1
> @@ -730,6 +731,11 @@ static void vhost_iommu_unmap_notify(IOMMUNotifier *n,
> IOMMUTLBEntry *iotlb)
> }
> }
>
> +static bool vhost_iommu_mr_enabled(struct vhost_dev *dev)
> +{
> + return !QLIST_EMPTY(&dev->iommu_list);
> +}
> +
> static void vhost_iommu_region_add(MemoryListener *listener,
> MemoryRegionSection *section)
> {
> @@ -782,6 +788,65 @@ static void vhost_iommu_region_del(MemoryListener
> *listener,
> }
> }
>
> +static void vhost_iommu_commit(MemoryListener *listener)
> +{
> + struct vhost_dev *dev = container_of(listener, struct vhost_dev,
> + iommu_listener);
> + struct vhost_memory_region *r;
> + int i;
> +
> + trace_vhost_iommu_commit();
> +
> + if (!vhost_iommu_mr_enabled(dev)) {
> + /*
> + * This means iommu_platform is enabled, however iommu memory
> + * region is disabled, e.g., when device passthrough is setup.
> + * Then, no translation is needed any more.
> + *
> + * Let's first invalidate the whole IOTLB, then pre-heat the
> + * static mapping by looping over vhost memory ranges.
> + */
> +
> + if (dev->vhost_ops->vhost_invalidate_device_iotlb(dev, 0,
> + UINT64_MAX)) {
> + error_report("%s: flush existing IOTLB failed", __func__);
> + return;
> + }
> +
> + /*
> + * Current VHOST_IOTLB_INVALIDATE API has a small defect that
> + * the invalidation for (start=0, size=UINT64_MAX) cannot
> + * really invalidate an cached range of (start=UINT64_MAX-1,
> + * size=1). We send this 2nd invalidation to workaround this.
> + * But, frankly speaking for QEMU we don't have a problem with
> + * this since we will never have a vhost cache with range
> + * (start=UINT64_MAX-1, size=1) - if you see
> + * address_space_get_iotlb_entry() all IOTLBs are page
> + * aligned.
> + */
> + if (dev->vhost_ops->vhost_invalidate_device_iotlb(dev, UINT64_MAX,
> + 1)) {
> + error_report("%s: flush existing IOTLB failed", __func__);
> + return;
> + }
> +
> + for (i = 0; i < dev->mem->nregions; i++) {
> + r = &dev->mem->regions[i];
> + /* Vhost regions are writable RAM, so IOMMU_RW suites. */
> + if (dev->vhost_ops->vhost_update_device_iotlb(dev,
> + r->guest_phys_addr,
> + r->userspace_addr,
> + r->memory_size,
> + IOMMU_RW)) {
> + error_report("%s: pre-heat static mapping failed", __func__);
> + return;
> + }
> + }
> +
> + trace_vhost_iommu_static_preheat();
> + }
> +}
> +
> static void vhost_region_nop(MemoryListener *listener,
> MemoryRegionSection *section)
> {
> @@ -1298,6 +1363,7 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
> hdev->iommu_listener = (MemoryListener) {
> .region_add = vhost_iommu_region_add,
> .region_del = vhost_iommu_region_del,
> + .commit = vhost_iommu_commit,
> };
>
> if (hdev->migration_blocker == NULL) {
> --
> 2.7.4
[Qemu-devel] [PATCH 3/3] vhost: iommu: cache static mapping if there is, Peter Xu, 2017/06/02
Re: [Qemu-devel] [PATCH 3/3] vhost: iommu: cache static mapping if there is,
Michael S. Tsirkin <=
Re: [Qemu-devel] [PATCH 0/3] exec: further refine address_space_get_iotlb_entry(), Michael S. Tsirkin, 2017/06/02