qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Qemu devel v5 PATCH 4/5] msf2: Add Smartfusion2 SoC.


From: sundeep subbaraya
Subject: Re: [Qemu-devel] [Qemu devel v5 PATCH 4/5] msf2: Add Smartfusion2 SoC.
Date: Tue, 6 Jun 2017 13:03:57 +0530

Hi Alistair,

On Wed, May 31, 2017 at 4:03 AM, Alistair Francis <address@hidden>
wrote:

> On Sun, May 28, 2017 at 10:17 PM, sundeep subbaraya
> <address@hidden> wrote:
> > Hi Alistair,
> >
> > On Sat, May 27, 2017 at 5:18 AM, Alistair Francis <address@hidden>
> > wrote:
> >>
> >> On Tue, May 16, 2017 at 8:38 AM, Subbaraya Sundeep
> >> <address@hidden> wrote:
> >> > Smartfusion2 SoC has hardened Microcontroller subsystem
> >> > and flash based FPGA fabric. This patch adds support for
> >> > Microcontroller subsystem in the SoC.
> >> >
> >> > Signed-off-by: Subbaraya Sundeep <address@hidden>
> >> > ---
> >> >  default-configs/arm-softmmu.mak |   1 +
> >> >  hw/arm/Makefile.objs            |   1 +
> >> >  hw/arm/msf2-soc.c               | 201
> >> > ++++++++++++++++++++++++++++++++++++++++
> >> >  include/hw/arm/msf2-soc.h       |  69 ++++++++++++++
> >> >  4 files changed, 272 insertions(+)
> >> >  create mode 100644 hw/arm/msf2-soc.c
> >> >  create mode 100644 include/hw/arm/msf2-soc.h
> >> >
> >> > diff --git a/default-configs/arm-softmmu.mak
> >> > b/default-configs/arm-softmmu.mak
> >> > index 78d7af0..7062512 100644
> >> > --- a/default-configs/arm-softmmu.mak
> >> > +++ b/default-configs/arm-softmmu.mak
> >> > @@ -122,3 +122,4 @@ CONFIG_ACPI=y
> >> >  CONFIG_SMBIOS=y
> >> >  CONFIG_ASPEED_SOC=y
> >> >  CONFIG_GPIO_KEY=y
> >> > +CONFIG_MSF2=y
> >> > diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> >> > index 4c5c4ee..c828061 100644
> >> > --- a/hw/arm/Makefile.objs
> >> > +++ b/hw/arm/Makefile.objs
> >> > @@ -18,3 +18,4 @@ obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
> >> >  obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
> >> >  obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
> >> >  obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o
> >> > +obj-$(CONFIG_MSF2) += msf2-soc.o
> >> > diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c
> >> > new file mode 100644
> >> > index 0000000..329e30c
> >> > --- /dev/null
> >> > +++ b/hw/arm/msf2-soc.c
> >> > @@ -0,0 +1,201 @@
> >> > +/*
> >> > + * SmartFusion2 SoC emulation.
> >> > + *
> >> > + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
> >> > + *
> >> > + * Permission is hereby granted, free of charge, to any person
> >> > obtaining a copy
> >> > + * of this software and associated documentation files (the
> >> > "Software"), to deal
> >> > + * in the Software without restriction, including without limitation
> >> > the rights
> >> > + * to use, copy, modify, merge, publish, distribute, sublicense,
> and/or
> >> > sell
> >> > + * copies of the Software, and to permit persons to whom the Software
> >> > is
> >> > + * furnished to do so, subject to the following conditions:
> >> > + *
> >> > + * The above copyright notice and this permission notice shall be
> >> > included in
> >> > + * all copies or substantial portions of the Software.
> >> > + *
> >> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >> > EXPRESS OR
> >> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> >> > MERCHANTABILITY,
> >> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
> >> > SHALL
> >> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
> OR
> >> > OTHER
> >> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> > ARISING FROM,
> >> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> >> > DEALINGS IN
> >> > + * THE SOFTWARE.
> >> > + */
> >> > +
> >> > +#include "qemu/osdep.h"
> >> > +#include "qapi/error.h"
> >> > +#include "qemu-common.h"
> >> > +#include "hw/arm/arm.h"
> >> > +#include "exec/address-spaces.h"
> >> > +#include "hw/char/serial.h"
> >> > +#include "hw/boards.h"
> >> > +#include "sysemu/block-backend.h"
> >> > +#include "hw/arm/msf2-soc.h"
> >> > +
> >> > +#define MSF2_TIMER_BASE     0x40004000
> >> > +#define MSF2_SYSREG_BASE    0x40038000
> >> > +
> >> > +#define MSF2_TIMER_IRQ0     14
> >> > +#define MSF2_TIMER_IRQ1     15
> >> > +
> >> > +static const uint32_t spi_addr[MSF2_NUM_SPIS] = { 0x40001000 ,
> >> > 0x40011000 };
> >> > +static const uint32_t uart_addr[MSF2_NUM_UARTS] = { 0x40000000 ,
> >> > 0x40010000 };
> >> > +
> >> > +static const int spi_irq[MSF2_NUM_SPIS] = { 2, 3 };
> >> > +static const int uart_irq[MSF2_NUM_UARTS] = { 10, 11 };
> >> > +
> >> > +static void m2sxxx_soc_initfn(Object *obj)
> >> > +{
> >> > +    MSF2State *s = MSF2_SOC(obj);
> >> > +    int i;
> >> > +
> >> > +    object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M);
> >> > +    qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default());
> >> > +
> >> > +    object_initialize(&s->sysreg, sizeof(s->sysreg),
> TYPE_MSF2_SYSREG);
> >> > +    qdev_set_parent_bus(DEVICE(&s->sysreg), sysbus_get_default());
> >> > +
> >> > +    object_initialize(&s->timer, sizeof(s->timer), TYPE_MSS_TIMER);
> >> > +    qdev_set_parent_bus(DEVICE(&s->timer), sysbus_get_default());
> >> > +
> >> > +    for (i = 0; i < MSF2_NUM_SPIS; i++) {
> >> > +        object_initialize(&s->spi[i], sizeof(s->spi[i]),
> >> > +                          TYPE_MSS_SPI);
> >> > +        qdev_set_parent_bus(DEVICE(&s->spi[i]),
> sysbus_get_default());
> >> > +    }
> >> > +}
> >> > +
> >> > +static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
> >> > +{
> >> > +    MSF2State *s = MSF2_SOC(dev_soc);
> >> > +    DeviceState *dev, *armv7m;
> >> > +    SysBusDevice *busdev;
> >> > +    Error *err = NULL;
> >> > +    int i;
> >> > +
> >> > +    MemoryRegion *system_memory = get_system_memory();
> >> > +    MemoryRegion *nvm = g_new(MemoryRegion, 1);
> >> > +    MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
> >> > +    MemoryRegion *sram = g_new(MemoryRegion, 1);
> >> > +
> >> > +    memory_region_init_ram(nvm, NULL, "MSF2.eNVM", s->envm_size,
> >> > +                           &error_fatal);
> >> > +
> >> > +    /*
> >> > +     * On power-on, the eNVM region 0x60000000 is automatically
> >> > +     * remapped to the Cortex-M3 processor executable region
> >> > +     * start address (0x0). We do not support remapping other eNVM,
> >> > +     * eSRAM and DDR regions by guest(via Sysreg) currently.
> >> > +     */
> >> > +    memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM.alias",
> >> > +                             nvm, 0, s->envm_size);
> >> > +    vmstate_register_ram_global(nvm);
> >> > +
> >> > +    memory_region_set_readonly(nvm, true);
> >> > +    memory_region_set_readonly(nvm_alias, true);
> >> > +
> >> > +    memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS,
> nvm);
> >> > +    memory_region_add_subregion(system_memory, 0, nvm_alias);
> >> > +
> >> > +    memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
> >> > +                           &error_fatal);
> >> > +    vmstate_register_ram_global(sram);
> >> > +    memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS,
> >> > sram);
> >> > +
> >> > +    armv7m = DEVICE(&s->armv7m);
> >> > +    qdev_prop_set_uint32(armv7m, "num-irq", 81);
> >> > +    qdev_prop_set_string(armv7m, "cpu-model", "cortex-m3");
> >> > +    object_property_set_link(OBJECT(&s->armv7m),
> >> > OBJECT(get_system_memory()),
> >> > +                                     "memory", &error_abort);
> >> > +    object_property_set_bool(OBJECT(&s->armv7m), true, "realized",
> >> > &err);
> >> > +    if (err != NULL) {
> >> > +        error_propagate(errp, err);
> >> > +        return;
> >> > +    }
> >> > +
> >> > +    for (i = 0; i < MSF2_NUM_UARTS; i++) {
> >> > +        if (serial_hds[i]) {
> >> > +            serial_mm_init(get_system_memory(), uart_addr[i], 2,
> >> > +                           qdev_get_gpio_in(armv7m, uart_irq[i]),
> >> > +                           115200, serial_hds[i],
> >> > DEVICE_NATIVE_ENDIAN);
> >> > +        }
> >> > +    }
> >> > +
> >> > +    dev = DEVICE(&s->timer);
> >> > +    /* pclk0 is the timer input clock */
> >> > +    qdev_prop_set_uint32(dev, "clock-frequency", s->pclk0);
> >> > +    object_property_set_bool(OBJECT(&s->timer), true, "realized",
> >> > &err);
> >> > +    if (err != NULL) {
> >> > +        error_propagate(errp, err);
> >> > +        return;
> >> > +    }
> >> > +    busdev = SYS_BUS_DEVICE(dev);
> >> > +    sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
> >> > +    sysbus_connect_irq(busdev, 0,
> >> > +                           qdev_get_gpio_in(armv7m,
> MSF2_TIMER_IRQ0));
> >> > +    sysbus_connect_irq(busdev, 1,
> >> > +                           qdev_get_gpio_in(armv7m,
> MSF2_TIMER_IRQ1));
> >> > +
> >> > +    dev = DEVICE(&s->sysreg);
> >> > +    object_property_set_bool(OBJECT(&s->sysreg), true, "realized",
> >> > &err);
> >> > +    if (err != NULL) {
> >> > +        error_propagate(errp, err);
> >> > +        return;
> >> > +    }
> >> > +    busdev = SYS_BUS_DEVICE(dev);
> >> > +    sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);
> >> > +
> >> > +    for (i = 0; i < MSF2_NUM_SPIS; i++) {
> >> > +        gchar *bus_name = g_strdup_printf("spi%d", i);
> >> > +
> >> > +        object_property_set_bool(OBJECT(&s->spi[i]), true,
> "realized",
> >> > &err);
> >> > +        if (err != NULL) {
> >> > +            g_free(bus_name);
> >> > +            error_propagate(errp, err);
> >> > +            return;
> >> > +        }
> >> > +
> >> > +        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
> >> > +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> >> > +                           qdev_get_gpio_in(armv7m, spi_irq[i]));
> >> > +
> >> > +        /* Alias controller SPI bus to the SoC itself */
> >> > +        object_property_add_alias(OBJECT(s), bus_name,
> >> > +                                  OBJECT(&s->spi[i]), "spi0",
> >> > +                                  &error_abort);
> >> > +        g_free(bus_name);
> >> > +    }
> >> > +}
> >> > +
> >> > +static Property m2sxxx_soc_properties[] = {
> >> > +    DEFINE_PROP_STRING("part-name", MSF2State, part_name),
> >>
> >> This is never used, why have it here?
> >
> > Just for information purpose as there are many variants. I thought it
> would
> > be good to
> > show this in qtree to user.
>
> Aw, cool. That is fine with me. Just add a comment saying that,
> otherwise it is confusing why it isn't used.
>

Ok I will add the comment.

>
> >>
> >>
> >> > +    DEFINE_PROP_UINT64("eNVM-size", MSF2State, envm_size,
> >> > MSF2_ENVM_SIZE),
> >> > +    DEFINE_PROP_UINT64("eSRAM-size", MSF2State, esram_size,
> >> > MSF2_ESRAM_SIZE),
> >> > +    /* Libero GUI shows 100Mhz as default for clocks */
> >> > +    DEFINE_PROP_UINT32("pclk0", MSF2State, pclk0, 100 * 1000000),
> >> > +    DEFINE_PROP_UINT32("pclk1", MSF2State, pclk1, 100 * 1000000),
> >>
> >> Same with this one.
> >
> > Yeah currently not used maybe it will be useful in future. I will remove
> it
> > for now.
>
> I think that is best, if you end up using it in the future you can add
> it back in.


Ok we will add in future if required.

Thanks,
Sundeep

>


> Thanks,
> Alistair
>
> >
> > Thanks,
> > Sundeep
> >>
> >>
> >> Thanks,
> >> Alistair
> >>
> >> > +    DEFINE_PROP_END_OF_LIST(),
> >> > +};
> >> > +
> >> > +static void m2sxxx_soc_class_init(ObjectClass *klass, void *data)
> >> > +{
> >> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> >> > +
> >> > +    dc->realize = m2sxxx_soc_realize;
> >> > +    dc->props = m2sxxx_soc_properties;
> >> > +}
> >> > +
> >> > +static const TypeInfo m2sxxx_soc_info = {
> >> > +    .name          = TYPE_MSF2_SOC,
> >> > +    .parent        = TYPE_SYS_BUS_DEVICE,
> >> > +    .instance_size = sizeof(MSF2State),
> >> > +    .instance_init = m2sxxx_soc_initfn,
> >> > +    .class_init    = m2sxxx_soc_class_init,
> >> > +};
> >> > +
> >> > +static void m2sxxx_soc_types(void)
> >> > +{
> >> > +    type_register_static(&m2sxxx_soc_info);
> >> > +}
> >> > +
> >> > +type_init(m2sxxx_soc_types)
> >> > diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h
> >> > new file mode 100644
> >> > index 0000000..67adddb
> >> > --- /dev/null
> >> > +++ b/include/hw/arm/msf2-soc.h
> >> > @@ -0,0 +1,69 @@
> >> > +/*
> >> > + * Microsemi Smartfusion2 SoC
> >> > + *
> >> > + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
> >> > + *
> >> > + * Permission is hereby granted, free of charge, to any person
> >> > obtaining a copy
> >> > + * of this software and associated documentation files (the
> >> > "Software"), to deal
> >> > + * in the Software without restriction, including without limitation
> >> > the rights
> >> > + * to use, copy, modify, merge, publish, distribute, sublicense,
> and/or
> >> > sell
> >> > + * copies of the Software, and to permit persons to whom the Software
> >> > is
> >> > + * furnished to do so, subject to the following conditions:
> >> > + *
> >> > + * The above copyright notice and this permission notice shall be
> >> > included in
> >> > + * all copies or substantial portions of the Software.
> >> > + *
> >> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >> > EXPRESS OR
> >> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> >> > MERCHANTABILITY,
> >> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
> >> > SHALL
> >> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
> OR
> >> > OTHER
> >> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> > ARISING FROM,
> >> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> >> > DEALINGS IN
> >> > + * THE SOFTWARE.
> >> > + */
> >> > +
> >> > +#ifndef HW_ARM_MSF2_SOC_H
> >> > +#define HW_ARM_MSF2_SOC_H
> >> > +
> >> > +#include "hw/misc/msf2-sysreg.h"
> >> > +#include "hw/timer/mss-timer.h"
> >> > +#include "hw/ssi/mss-spi.h"
> >> > +#include "hw/arm/armv7m.h"
> >> > +#include "qemu/cutils.h"
> >> > +
> >> > +#define TYPE_MSF2_SOC     "msf2-soc"
> >> > +#define MSF2_SOC(obj)     OBJECT_CHECK(MSF2State, (obj),
> TYPE_MSF2_SOC)
> >> > +
> >> > +#define MSF2_NUM_SPIS         2
> >> > +#define MSF2_NUM_UARTS        2
> >> > +
> >> > +#define ENVM_BASE_ADDRESS     0x60000000
> >> > +
> >> > +#define SRAM_BASE_ADDRESS     0x20000000
> >> > +
> >> > +#define MSF2_ENVM_SIZE        (512 * K_BYTE)
> >> > +#define MSF2_ESRAM_SIZE       (64 * K_BYTE)
> >> > +
> >> > +#define M2S010_ENVM_SIZE      (256 * K_BYTE)
> >> > +#define M2S010_ESRAM_SIZE     (64 * K_BYTE)
> >> > +
> >> > +typedef struct MSF2State {
> >> > +    /*< private >*/
> >> > +    SysBusDevice parent_obj;
> >> > +    /*< public >*/
> >> > +
> >> > +    ARMv7MState armv7m;
> >> > +
> >> > +    char *part_name;
> >> > +    uint64_t envm_size;
> >> > +    uint64_t esram_size;
> >> > +
> >> > +    uint32_t pclk0;
> >> > +    uint32_t pclk1;
> >> > +
> >> > +    MSF2SysregState sysreg;
> >> > +    MSSTimerState timer;
> >> > +    MSSSpiState spi[MSF2_NUM_SPIS];
> >> > +} MSF2State;
> >> > +
> >> > +#endif
> >> > --
> >> > 2.5.0
> >> >
> >
> >
>


reply via email to

[Prev in Thread] Current Thread [Next in Thread]