[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error
From: |
Fernando Casas Schössow |
Subject: |
Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error |
Date: |
Tue, 20 Jun 2017 06:30:00 +0000 |
Hi Ladi,
In this case both guests are CentOS 7.3 running the same kernel 3.10.0-514.21.1.
Also the guest that fails most frequently is running Docker with 4 or 5
containers.
Another thing I would like to mention is that the host is running on Alpine's
default grsec patched kernel. I have the option to install also a vanilla
kernel. Would it make sense to switch to the vanilla kernel on the host and see
if that helps?
And last but not least KSM is enabled on the host. Should I disable it?
Following your advice I will run memtest on the host and report back. Just as a
side comment, the host is running on ECC memory.
Thanks for all your help.
Fer.
On mar, jun 20, 2017 at 7:59 , Ladi Prosek <address@hidden> wrote:
Hi Fernando, On Tue, Jun 20, 2017 at 12:10 AM, Fernando Casas Schössow
<address@hidden<mailto:address@hidden>> wrote:
Hi Ladi, Today two guests failed again at different times of day. One of them
was the one I switched from virtio_blk to virtio_scsi so this change didn't
solved the problem. Now in this guest I also disabled virtio_balloon,
continuing with the elimination process. Also this time I found a different
error message in the guest console. In the guest already switched to
virtio_scsi: virtio_scsi virtio2: request:id 44 is not a head! Followed by the
usual "task blocked for more than 120 seconds." error. On the guest still
running on virtio_blk the error was similar: virtio_blk virtio2: req.0:id 42 is
not a head! blk_update_request: I/O error, dev vda, sector 645657736 Buffer I/O
error on dev dm-1, logical block 7413821, lost async page write Followed by the
usual "task blocked for more than 120 seconds." error.
Honestly this is starting to look more and more like a memory corruption. Two
different virtio devices and two different guest operating systems, that would
have to be a bug in the common virtio code and we would have seen it somewhere
else already. Would it be possible run a thorough memtest on the host just in
case?
Do you think that the blk_update_request and the buffer I/O error may be a
consequence of the previous "is not a head!" error or should I be worried for a
storage level issue here? Now I will wait to see if disabling virtio_balloon
helps or not and report back. Thanks. Fer On vie, jun 16, 2017 at 12:25 , Ladi
Prosek <address@hidden<mailto:address@hidden>> wrote: On Fri, Jun 16, 2017 at
12:11 PM, Fernando Casas Schössow <address@hidden<mailto:address@hidden>>
wrote: Hi Ladi, Thanks a lot for looking into this and replying. I will do my
best to rebuild and deploy Alpine's qemu packages with this patch included but
not sure its feasible yet. In any case, would it be possible to have this patch
included in the next qemu release? Yes, I have already added this to my todo
list. The current error message is helpful but knowing which device was
involved will be much more helpful. Regarding the environment, I'm not doing
migrations and only managed save is done in case the host needs to be rebooted
or shutdown. The QEMU process is running the VM since the host is started and
this failuire is ocurring randomly without any previous manage save done. As
part of troubleshooting on one of the guests I switched from virtio_blk to
virtio_scsi for the guest disks but I will need more time to see if that
helped. If I have this problem again I will follow your advise and remove
virtio_balloon. Thanks, please keep us posted. Another question: is there any
way to monitor the virtqueue size either from the guest itself or from the
host? Any file in sysfs or proc? This may help to understand in which
conditions this is happening and to react faster to mitigate the problem. The
problem is not in the virtqueue size but in one piece of internal state
("inuse") which is meant to track the number of buffers "checked out" by QEMU.
It's being compared to virtqueue size merely as a sanity check. I'm afraid that
there's no way to expose this variable without rebuilding QEMU. The best you
could do is attach gdb to the QEMU process and use some clever data access
breakpoints to catch suspicious writes to the variable. Although it's likely
that it just creeps up slowly and you won't see anything interesting. It's
probably beyond reasonable at this point anyway. I would continue with the
elimination process (virtio_scsi instead of virtio_blk, no balloon, etc.) and
then maybe once we know which device it is, we can add some instrumentation to
the code. Thanks again for your help with this! Fer On vie, jun 16, 2017 at
8:58 , Ladi Prosek <address@hidden<mailto:address@hidden>> wrote: Hi, Would you
be able to enhance the error message and rebuild QEMU? --- a/hw/virtio/virtio.c
+++ b/hw/virtio/virtio.c @@ -856,7 +856,7 @@ void *virtqueue_pop(VirtQueue *vq,
size_t sz) max = vq->vring.num; if (vq->inuse = vq->vring.num) { -
virtio_error(vdev, "Virtqueue size exceeded"); + virtio_error(vdev, "Virtqueue
%u device %s size exceeded", vq->queue_index, vdev->name); goto done; } This
would at least confirm the theory that it's caused by virtio-blk-pci. If
rebuilding is not feasible I would start by removing other virtio devices --
particularly balloon which has had quite a few virtio related bugs fixed
recently. Does your environment involve VM migrations or saving/resuming, or
does the crashing QEMU process always run the VM from its boot? Thanks!
- [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Fernando Casas Schössow, 2017/06/15
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Ladi Prosek, 2017/06/16
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Fernando Casas Schössow, 2017/06/16
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Ladi Prosek, 2017/06/16
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Fernando Casas Schössow, 2017/06/19
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Ladi Prosek, 2017/06/20
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error,
Fernando Casas Schössow <=
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Ladi Prosek, 2017/06/20
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Fernando Casas Schössow, 2017/06/21
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Ladi Prosek, 2017/06/22
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Fernando Casas Schössow, 2017/06/23
- Message not available
- Re: [Qemu-devel] Guest unresponsive after Virtqueue size exceeded error, Fernando Casas Schössow, 2017/06/24