[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 3/5] migration: Create load_setup()/cleanup()
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH v3 3/5] migration: Create load_setup()/cleanup() methods |
Date: |
Thu, 22 Jun 2017 11:33:34 +0100 |
User-agent: |
Mutt/1.8.2 (2017-04-18) |
* Juan Quintela (address@hidden) wrote:
> We need to do things at load time and at cleanup time.
>
> Signed-off-by: Juan Quintela <address@hidden>
>
> --
>
> Move the printing of the error message so we can print the device
> giving the error.
> ---
> include/migration/register.h | 2 ++
> migration/savevm.c | 44
> ++++++++++++++++++++++++++++++++++++++++++++
> migration/trace-events | 2 ++
> 3 files changed, 48 insertions(+)
>
> diff --git a/include/migration/register.h b/include/migration/register.h
> index 938ea2b..a0f1edd 100644
> --- a/include/migration/register.h
> +++ b/include/migration/register.h
> @@ -39,6 +39,8 @@ typedef struct SaveVMHandlers {
> uint64_t *non_postcopiable_pending,
> uint64_t *postcopiable_pending);
> LoadStateHandler *load_state;
> + int (*load_setup)(QEMUFile *f, void *opaque);
> + int (*load_cleanup)(void *opaque);
> } SaveVMHandlers;
>
> int register_savevm_live(DeviceState *dev,
> diff --git a/migration/savevm.c b/migration/savevm.c
> index 7d273f9..a0733f9 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1923,6 +1923,44 @@ qemu_loadvm_section_part_end(QEMUFile *f,
> MigrationIncomingState *mis)
> return 0;
> }
>
> +static int qemu_loadvm_state_setup(QEMUFile *f)
> +{
> + SaveStateEntry *se;
> + int ret;
> +
> + trace_loadvm_state_setup();
> + QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> + if (!se->ops || !se->ops->load_setup) {
> + continue;
> + }
> + if (se->ops && se->ops->is_active) {
> + if (!se->ops->is_active(se->opaque)) {
> + continue;
> + }
> + }
> +
> + ret = se->ops->load_setup(f, se->opaque);
> + if (ret < 0) {
> + qemu_file_set_error(f, ret);
> + error_report("Load state of device %s failed", se->idstr);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static void qemu_loadvm_state_cleanup(void)
> +{
> + SaveStateEntry *se;
> +
> + trace_loadvm_state_cleanup();
> + QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> + if (se->ops && se->ops->load_cleanup) {
> + se->ops->load_cleanup(se->opaque);
> + }
> + }
> +}
> +
> static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
> {
> uint8_t section_type;
> @@ -1995,6 +2033,11 @@ int qemu_loadvm_state(QEMUFile *f)
> return -ENOTSUP;
> }
>
> +
> + if (qemu_loadvm_state_setup(f) != 0) {
> + return -EINVAL;
> + }
> +
> if (!savevm_state.skip_configuration || enforce_config_section()) {
> if (qemu_get_byte(f) != QEMU_VM_CONFIGURATION) {
> error_report("Configuration section missing");
> @@ -2058,6 +2101,7 @@ int qemu_loadvm_state(QEMUFile *f)
> }
> }
>
> + qemu_loadvm_state_cleanup();
Where does the equivalent happen for postcopy?
Do you need to add a call at the bottom of postcopy_ram_listen_thread?
Dave
> cpu_synchronize_all_post_init();
>
> return ret;
> diff --git a/migration/trace-events b/migration/trace-events
> index 9669e94..cb2c4b5 100644
> --- a/migration/trace-events
> +++ b/migration/trace-events
> @@ -7,6 +7,8 @@ qemu_loadvm_state_section_partend(uint32_t section_id) "%u"
> qemu_loadvm_state_post_main(int ret) "%d"
> qemu_loadvm_state_section_startfull(uint32_t section_id, const char *idstr,
> uint32_t instance_id, uint32_t version_id) "%u(%s) %u %u"
> qemu_savevm_send_packaged(void) ""
> +loadvm_state_setup(void) ""
> +loadvm_state_cleanup(void) ""
> loadvm_handle_cmd_packaged(unsigned int length) "%u"
> loadvm_handle_cmd_packaged_main(int ret) "%d"
> loadvm_handle_cmd_packaged_received(int ret) "%d"
> --
> 2.9.4
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [Qemu-devel] [PATCH v3 0/5] Create setup/cleanup methods for migration incoming side, Juan Quintela, 2017/06/21
- [Qemu-devel] [PATCH v3 1/5] migration: Rename save_live_setup() to save_setup(), Juan Quintela, 2017/06/21
- [Qemu-devel] [PATCH v3 2/5] migration: Rename cleanup() to save_cleanup(), Juan Quintela, 2017/06/21
- [Qemu-devel] [PATCH v3 3/5] migration: Create load_setup()/cleanup() methods, Juan Quintela, 2017/06/21
- Re: [Qemu-devel] [PATCH v3 3/5] migration: Create load_setup()/cleanup() methods,
Dr. David Alan Gilbert <=
- [Qemu-devel] [PATCH v3 4/5] migration: Convert ram to use new load_setup()/load_cleanup(), Juan Quintela, 2017/06/21
- [Qemu-devel] [PATCH v3 5/5] migration: Make compression_threads use save/load_setup/cleanup(), Juan Quintela, 2017/06/21