qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] tests/pxe: Check virtio-net-ccw on s390x


From: Michael S. Tsirkin
Subject: Re: [Qemu-devel] [PATCH] tests/pxe: Check virtio-net-ccw on s390x
Date: Mon, 7 Aug 2017 23:35:23 +0300

On Thu, Aug 03, 2017 at 03:30:19PM +0200, Thomas Huth wrote:
> Now that we've got a firmware that can do TFTP booting on s390x (i.e.
> the pc-bios/s390-netboot.img), we can enable the PXE tester for this
> architecture, too.
> 
> Signed-off-by: Thomas Huth <address@hidden>
> ---
>  Since this only adds a test, I guess this could still be included
>  for 2.10 ... otherwise, I think it's also OK to simply postpone this
>  to 2.11 instead

I think 2.11 is preferable.

>  tests/Makefile.include |  1 +
>  tests/boot-sector.c    | 25 ++++++++++++++++++++++---
>  tests/pxe-test.c       |  7 +++++++
>  3 files changed, 30 insertions(+), 3 deletions(-)
> 
> diff --git a/tests/Makefile.include b/tests/Makefile.include
> index 59e536b..f9af5e3 100644
> --- a/tests/Makefile.include
> +++ b/tests/Makefile.include
> @@ -337,6 +337,7 @@ check-qtest-microblazeel-y = $(check-qtest-microblaze-y)
>  check-qtest-xtensaeb-y = $(check-qtest-xtensa-y)
>  
>  check-qtest-s390x-y = tests/boot-serial-test$(EXESUF)
> +check-qtest-s390x-y += tests/pxe-test$(EXESUF)
>  
>  check-qtest-generic-y += tests/qom-test$(EXESUF)
>  check-qtest-generic-y += tests/test-hmp$(EXESUF)
> diff --git a/tests/boot-sector.c b/tests/boot-sector.c
> index e3880f4..87a8fb5 100644
> --- a/tests/boot-sector.c
> +++ b/tests/boot-sector.c
> @@ -21,6 +21,7 @@
>  #define SIGNATURE 0xdead
>  #define SIGNATURE_OFFSET 0x10
>  #define BOOT_SECTOR_ADDRESS 0x7c00
> +#define SIGNATURE_ADDR (BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET)
>  
>  /* Boot sector code: write SIGNATURE into memory,
>   * then halt.
> @@ -73,6 +74,7 @@ int boot_sector_init(char *fname)
>  {
>      int fd, ret;
>      size_t len = sizeof boot_sector;
> +    const char *arch = qtest_get_arch();
>  
>      fd = mkstemp(fname);
>      if (fd < 0) {
> @@ -81,10 +83,27 @@ int boot_sector_init(char *fname)
>      }
>  
>      /* For Open Firmware based system, we can use a Forth script instead */
> -    if (strcmp(qtest_get_arch(), "ppc64") == 0) {
> +    if (g_str_equal(arch, "ppc64")) {
>          len = sprintf((char *)boot_sector, "\\ Bootscript\n%x %x c! %x %x 
> c!\n",
> -                LOW(SIGNATURE), BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET,
> -                HIGH(SIGNATURE), BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET + 1);
> +                LOW(SIGNATURE), SIGNATURE_ADDR,
> +                HIGH(SIGNATURE), SIGNATURE_ADDR + 1);
> +    } else if (g_str_equal(arch, "s390x")) {
> +        /* For s390x, fake a kernel signature */
> +        const uint8_t psw[] = {
> +            0x00, 0x08, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00
> +        };
> +        const uint8_t code[] = {
> +            0xa7, 0xf4, 0x00, 0x0a,     /* j 0x10010 */
> +            0x00, 0x00, 0x00, 0x00,
> +            'S', '3', '9', '0',
> +            'E', 'P', 0x00, 0x01,
> +            0xa7, 0x38, HIGH(SIGNATURE_ADDR), LOW(SIGNATURE_ADDR), /* lhi r3 
> */
> +            0xa7, 0x48, LOW(SIGNATURE), HIGH(SIGNATURE),    /* lhi r4,0xadde 
> */
> +            0x40, 0x40, 0x30, 0x00,     /* sth r4,0(r3) */
> +            0xa7, 0xf4, 0xff, 0xfa      /* j 0x10010 */
> +        };
> +        memcpy(boot_sector, psw, 8);
> +        memcpy(&boot_sector[0x10000], code, sizeof(code));


Could we avoid overwriting boot sector?
We really should have
x86_boot_sector
ppc64_boot_sector
s390_boot_sector

And write out the correct thing.

Also:
 * Q35 machine requires a minimum 0x7e000 bytes disk.
 * (bug or feature?)

probably does not apply to s390x, does it?

BTW I'm guessing it actually does not apply to the pxe test
at all.

>      }
>  
>      ret = write(fd, boot_sector, len);
> diff --git a/tests/pxe-test.c b/tests/pxe-test.c
> index cf6e225..0d70afc 100644
> --- a/tests/pxe-test.c
> +++ b/tests/pxe-test.c
> @@ -51,6 +51,11 @@ static void test_pxe_spapr_vlan(void)
>      test_pxe_one("-device spapr-vlan,netdev=" NETNAME, true);
>  }
>  
> +static void test_pxe_virtio_ccw(void)
> +{
> +    test_pxe_one("-device virtio-net-ccw,bootindex=1,netdev=" NETNAME, 
> false);
> +}
> +
>  int main(int argc, char *argv[])
>  {
>      int ret;
> @@ -68,6 +73,8 @@ int main(int argc, char *argv[])
>      } else if (strcmp(arch, "ppc64") == 0) {
>          qtest_add_func("pxe/virtio", test_pxe_virtio_pci);
>          qtest_add_func("pxe/spapr-vlan", test_pxe_spapr_vlan);
> +    } else if (g_str_equal(arch, "s390x")) {
> +        qtest_add_func("pxe/virtio-ccw", test_pxe_virtio_ccw);
>      }
>      ret = g_test_run();
>      boot_sector_cleanup(disk);
> -- 
> 1.8.3.1



reply via email to

[Prev in Thread] Current Thread [Next in Thread]