qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 06/17] qemu-options.hx: Remove confusing spaces in pa


From: Michael Tokarev
Subject: [Qemu-devel] [PULL 06/17] qemu-options.hx: Remove confusing spaces in parameter listings
Date: Sat, 10 Feb 2018 10:55:01 +0300

From: Thomas Huth <address@hidden>

The spaces between the parameters in the chardev and tpmdev sections
are rather confusing than helpful, and prevent that the lists can be
copy-n-pasted easily for real usage. We also don't use such spaces
in other sections in the documentation, e.g. with the -netdev option,
so let's be consistent and remove the spaces in the chardev and tpmdev
sections, too.

Signed-off-by: Thomas Huth <address@hidden>
Signed-off-by: Michael Tokarev <address@hidden>
Reviewed-by: Stefan Berger <address@hidden>
Reviewed-by: Paolo Bonzini <address@hidden>
---
 qemu-options.hx | 48 ++++++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index d15c1713d1..5050a49a5e 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2522,7 +2522,7 @@ STEXI
 
 The general form of a character device option is:
 @table @option
address@hidden -chardev @var{backend} ,address@hidden [,mux=on|off] 
[,@var{options}]
address@hidden -chardev @var{backend},address@hidden,mux=on|off][,@var{options}]
 @findex -chardev
 Backend is one of:
 @option{null},
@@ -2541,7 +2541,7 @@ Backend is one of:
 @option{tty},
 @option{parallel},
 @option{parport},
address@hidden
address@hidden,
 @option{spiceport}.
 The specific backend will determine the applicable options.
 
@@ -2605,11 +2605,11 @@ opened.
 The available backends are:
 
 @table @option
address@hidden -chardev null ,address@hidden
address@hidden -chardev null,address@hidden
 A void device. This device will not emit any data, and will drop any data it
 receives. The null backend does not take any options.
 
address@hidden -chardev socket ,address@hidden address@hidden options} or 
@var{unix options}] [,server] [,nowait] [,telnet] [,address@hidden 
[,address@hidden
address@hidden -chardev socket,address@hidden,@var{TCP options} or @var{unix 
options}][,server][,nowait][,telnet][,address@hidden,address@hidden
 
 Create a two-way stream socket, which can be either a TCP or a unix socket. A
 unix socket will be created if @option{path} is specified. Behaviour is
@@ -2636,7 +2636,7 @@ TCP and unix socket options are given below:
 
 @table @option
 
address@hidden TCP options: address@hidden [,address@hidden [,address@hidden 
[,ipv4] [,ipv6] [,nodelay]
address@hidden TCP options: 
address@hidden,address@hidden,address@hidden,ipv4][,ipv6][,nodelay]
 
 @option{host} for a listening socket specifies the local address to be bound.
 For a connecting socket species the remote host to connect to. @option{host} is
@@ -2664,7 +2664,7 @@ required.
 
 @end table
 
address@hidden -chardev udp ,address@hidden [,address@hidden ,address@hidden 
[,address@hidden [,address@hidden [,ipv4] [,ipv6]
address@hidden -chardev 
udp,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,ipv4][,ipv6]
 
 Sends all traffic from the guest to a remote host over UDP.
 
@@ -2683,12 +2683,12 @@ available local port will be used.
 @option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used.
 If neither is specified the device may use either protocol.
 
address@hidden -chardev msmouse ,address@hidden
address@hidden -chardev msmouse,address@hidden
 
 Forward QEMU's emulated msmouse events to the guest. @option{msmouse} does not
 take any options.
 
address@hidden -chardev vc ,address@hidden [[,address@hidden [,address@hidden 
[[,address@hidden [,address@hidden
address@hidden -chardev 
vc,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
 
 Connect to a QEMU text console. @option{vc} may optionally be given a specific
 size.
@@ -2699,12 +2699,12 @@ the console, in pixels.
 @option{cols} and @option{rows} specify that the console be sized to fit a text
 console with the given dimensions.
 
address@hidden -chardev ringbuf ,address@hidden [,address@hidden
address@hidden -chardev ringbuf,address@hidden,address@hidden
 
 Create a ring buffer with fixed size @option{size}.
 @var{size} must be a power of two and defaults to @code{64K}.
 
address@hidden -chardev file ,address@hidden ,address@hidden
address@hidden -chardev file,address@hidden,address@hidden
 
 Log all traffic received from the guest to a file.
 
@@ -2712,7 +2712,7 @@ Log all traffic received from the guest to a file.
 created if it does not already exist, and overwritten if it does. @option{path}
 is required.
 
address@hidden -chardev pipe ,address@hidden ,address@hidden
address@hidden -chardev pipe,address@hidden,address@hidden
 
 Create a two-way connection to the guest. The behaviour differs slightly 
between
 Windows hosts and other hosts:
@@ -2729,14 +2729,14 @@ be present.
 @option{path} forms part of the pipe path as described above. @option{path} is
 required.
 
address@hidden -chardev console ,address@hidden
address@hidden -chardev console,address@hidden
 
 Send traffic from the guest to QEMU's standard output. @option{console} does 
not
 take any options.
 
 @option{console} is only available on Windows hosts.
 
address@hidden -chardev serial ,address@hidden ,address@hidden
address@hidden -chardev serial,address@hidden,address@hidden
 
 Send traffic from the guest to a serial device on the host.
 
@@ -2745,33 +2745,33 @@ not only serial lines.
 
 @option{path} specifies the name of the serial device to open.
 
address@hidden -chardev pty ,address@hidden
address@hidden -chardev pty,address@hidden
 
 Create a new pseudo-terminal on the host and connect to it. @option{pty} does
 not take any options.
 
 @option{pty} is not available on Windows hosts.
 
address@hidden -chardev stdio ,address@hidden [,signal=on|off]
address@hidden -chardev stdio,address@hidden,signal=on|off]
 Connect to standard input and standard output of the QEMU process.
 
 @option{signal} controls if signals are enabled on the terminal, that includes
 exiting QEMU with the key sequence @key{Control-c}. This option is enabled by
 default, use @option{signal=off} to disable it.
 
address@hidden -chardev braille ,address@hidden
address@hidden -chardev braille,address@hidden
 
 Connect to a local BrlAPI server. @option{braille} does not take any options.
 
address@hidden -chardev tty ,address@hidden ,address@hidden
address@hidden -chardev tty,address@hidden,address@hidden
 
 @option{tty} is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and
 DragonFlyBSD hosts.  It is an alias for @option{serial}.
 
 @option{path} specifies the path to the tty. @option{path} is required.
 
address@hidden -chardev parallel ,address@hidden ,address@hidden
address@hidden -chardev parport ,address@hidden ,address@hidden
address@hidden -chardev parallel,address@hidden,address@hidden
address@hidden -chardev parport,address@hidden,address@hidden
 
 @option{parallel} is only available on Linux, FreeBSD and DragonFlyBSD hosts.
 
@@ -2780,7 +2780,7 @@ Connect to a local parallel port.
 @option{path} specifies the path to the parallel port device. @option{path} is
 required.
 
address@hidden -chardev spicevmc ,address@hidden ,address@hidden, address@hidden
address@hidden -chardev spicevmc,address@hidden,address@hidden,address@hidden
 
 @option{spicevmc} is only available when spice support is built in.
 
@@ -2790,7 +2790,7 @@ required.
 
 Connect to a spice virtual machine channel, such as vdiport.
 
address@hidden -chardev spiceport ,address@hidden ,address@hidden, 
address@hidden
address@hidden -chardev spiceport,address@hidden,address@hidden,address@hidden
 
 @option{spiceport} is only available when spice support is built in.
 
@@ -2898,7 +2898,7 @@ STEXI
 The general form of a TPM device option is:
 @table @option
 
address@hidden -tpmdev @var{backend} ,address@hidden [,@var{options}]
address@hidden -tpmdev @var{backend},address@hidden,@var{options}]
 @findex -tpmdev
 
 The specific backend type will determine the applicable options.
@@ -2913,7 +2913,7 @@ The available backends are:
 
 @table @option
 
address@hidden -tpmdev passthrough, address@hidden, address@hidden, 
address@hidden
address@hidden -tpmdev passthrough,address@hidden,address@hidden,address@hidden
 
 (Linux-host only) Enable access to the host's TPM using the passthrough
 driver.
@@ -2950,7 +2950,7 @@ To create a passthrough TPM use the following two options:
 Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
 @code{tpmdev=tpm0} in the device option.
 
address@hidden -tpmdev emulator, address@hidden, address@hidden
address@hidden -tpmdev emulator,address@hidden,address@hidden
 
 (Linux-host only) Enable access to a TPM emulator using Unix domain socket 
based
 chardev backend.
-- 
2.11.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]