[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 7/7] hw/sd: move sdcard legacy API to "hw/sd/
From: |
Alistair Francis |
Subject: |
Re: [Qemu-devel] [PATCH v3 7/7] hw/sd: move sdcard legacy API to "hw/sd/sdcard_legacy.h" |
Date: |
Fri, 16 Feb 2018 13:04:13 -0800 |
On Thu, Feb 15, 2018 at 6:29 PM, Philippe Mathieu-Daudé <address@hidden> wrote:
> omap_mmc.c is the last user left.
>
> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Reviewed-by: Alistair Francis <address@hidden>
Alistair
> ---
> include/hw/sd/sd.h | 16 --------------
> include/hw/sd/sdcard_legacy.h | 50
> +++++++++++++++++++++++++++++++++++++++++++
> hw/sd/omap_mmc.c | 2 +-
> hw/sd/sd.c | 1 +
> 4 files changed, 52 insertions(+), 17 deletions(-)
> create mode 100644 include/hw/sd/sdcard_legacy.h
>
> diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h
> index 4491db98de..58528b4d2c 100644
> --- a/include/hw/sd/sd.h
> +++ b/include/hw/sd/sd.h
> @@ -131,22 +131,6 @@ typedef struct {
> void (*set_readonly)(DeviceState *dev, bool readonly);
> } SDBusClass;
>
> -/* Legacy functions to be used only by non-qdevified callers */
> -SDState *sd_init(BlockBackend *bs, bool is_spi);
> -int sd_do_command(SDState *sd, SDRequest *req,
> - uint8_t *response);
> -void sd_write_data(SDState *sd, uint8_t value);
> -uint8_t sd_read_data(SDState *sd);
> -void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert);
> -/* sd_enable should not be used -- it is only used on the nseries boards,
> - * where it is part of a broken implementation of the MMC card slot switch
> - * (there should be two card slots which are multiplexed to a single MMC
> - * controller, but instead we model it with one card and controller and
> - * disable the card when the second slot is selected, so it looks like the
> - * second slot is always empty).
> - */
> -void sd_enable(SDState *sd, bool enable);
> -
> /* Functions to be used by qdevified callers (working via
> * an SDBus rather than directly with SDState)
> */
> diff --git a/include/hw/sd/sdcard_legacy.h b/include/hw/sd/sdcard_legacy.h
> new file mode 100644
> index 0000000000..8681f8089b
> --- /dev/null
> +++ b/include/hw/sd/sdcard_legacy.h
> @@ -0,0 +1,50 @@
> +/*
> + * SD Memory Card emulation (deprecated legacy API)
> + *
> + * Copyright (c) 2006 Andrzej Zaborowski <address@hidden>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
> + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
> + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
> + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
> + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
> + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
> + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
> + * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#ifndef HW_SDCARD_LEGACY_H
> +#define HW_SDCARD_LEGACY_H
> +
> +#include "hw/sd/sd.h"
> +
> +/* Legacy functions to be used only by non-qdevified callers */
> +SDState *sd_init(BlockBackend *blk, bool is_spi);
> +int sd_do_command(SDState *card, SDRequest *request, uint8_t *response);
> +void sd_write_data(SDState *card, uint8_t value);
> +uint8_t sd_read_data(SDState *card);
> +void sd_set_cb(SDState *card, qemu_irq readonly, qemu_irq insert);
> +
> +/* sd_enable should not be used -- it is only used on the nseries boards,
> + * where it is part of a broken implementation of the MMC card slot switch
> + * (there should be two card slots which are multiplexed to a single MMC
> + * controller, but instead we model it with one card and controller and
> + * disable the card when the second slot is selected, so it looks like the
> + * second slot is always empty).
> + */
> +void sd_enable(SDState *card, bool enable);
> +
> +#endif /* HW_SDCARD_LEGACY_H */
> diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
> index 5b47cadf11..be14ac4f40 100644
> --- a/hw/sd/omap_mmc.c
> +++ b/hw/sd/omap_mmc.c
> @@ -19,7 +19,7 @@
> #include "qemu/osdep.h"
> #include "hw/hw.h"
> #include "hw/arm/omap.h"
> -#include "hw/sd/sd.h"
> +#include "hw/sd/sdcard_legacy.h"
>
> struct omap_mmc_s {
> qemu_irq irq;
> diff --git a/hw/sd/sd.c b/hw/sd/sd.c
> index 72d32f7845..ae2d915977 100644
> --- a/hw/sd/sd.c
> +++ b/hw/sd/sd.c
> @@ -34,6 +34,7 @@
> #include "hw/hw.h"
> #include "sysemu/block-backend.h"
> #include "hw/sd/sd.h"
> +#include "hw/sd/sdcard_legacy.h"
> #include "qapi/error.h"
> #include "qemu/bitmap.h"
> #include "hw/qdev-properties.h"
> --
> 2.16.1
>
>
- [Qemu-devel] [PATCH v3 1/7] hw/sd/milkymist-memcard: use qemu_log_mask(), (continued)
- [Qemu-devel] [PATCH v3 1/7] hw/sd/milkymist-memcard: use qemu_log_mask(), Philippe Mathieu-Daudé, 2018/02/15
- [Qemu-devel] [PATCH v3 2/7] hw/sd/milkymist-memcard: split realize() out of SysBusDevice init(), Philippe Mathieu-Daudé, 2018/02/15
- [Qemu-devel] [PATCH v3 3/7] hw/sd/milkymist-memcard: expose a SDBus and connect the SDCard to it, Philippe Mathieu-Daudé, 2018/02/15
- [Qemu-devel] [PATCH v3 4/7] hw/sd/ssi-sd: use the SDBus API, connect the SDCard to the bus, Philippe Mathieu-Daudé, 2018/02/15
- [Qemu-devel] [RFC PATCH v3 5/7] hw/sd/pl181: expose a SDBus and connect the SDCard to it, Philippe Mathieu-Daudé, 2018/02/15
- [Qemu-devel] [PATCH v3 6/7] hw/sd: make sd_data_ready() static, Philippe Mathieu-Daudé, 2018/02/15
- [Qemu-devel] [PATCH v3 7/7] hw/sd: move sdcard legacy API to "hw/sd/sdcard_legacy.h", Philippe Mathieu-Daudé, 2018/02/15
- Re: [Qemu-devel] [PATCH v3 7/7] hw/sd: move sdcard legacy API to "hw/sd/sdcard_legacy.h",
Alistair Francis <=
- Re: [Qemu-devel] [PATCH v3 0/7] SDHCI: convert legacy devices to the SDBus API (part 6), Peter Maydell, 2018/02/22