[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1759338] [NEW] qemu-system-sparc w/ SS-20 ROM does not
From: |
address@hidden |
Subject: |
[Qemu-devel] [Bug 1759338] [NEW] qemu-system-sparc w/ SS-20 ROM does not add processors |
Date: |
Tue, 27 Mar 2018 17:33:05 -0000 |
Public bug reported:
When booting a SPARCstation-20 with the original ROM, qemu does not set
the number of processors in a way that this ROM can understand it, and
the ROM always reports only 1 processor installed:
~/qemu /usr/local/bin/qemu-system-sparc -bios ./ss20_v2.25_rom -M SS-20 -cpu
"TI SuperSparc 60" -smp 2 -nographic
Power-ON Reset
SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95)
CPU_#0 TI, TMS390Z50(3.x) 0Mb External cache
CPU_#1 ******* NOT installed *******
CPU_#2 ******* NOT installed *******
CPU_#3 ******* NOT installed *******
<<< CPU_00000000 on MBus Slot_00000000 >>> IS RUNNING (MID =
00000008)
...
Cpu #0 TI,TMS390Z50
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
...
SPARCstation 20 (1 X 390Z50), No Keyboard
ROM Rev. 2.25, 128 MB memory installed, Serial #1193046.
Ethernet address 52:54:0:12:34:56, Host ID: 72123456.
(It is necessary use SS-20 since it is the only sun4m model that
supports 512MB RAM, and I can't get Solaris to install on the SS-20
using OpenBIOS.)
When booting with OpenBIOS I can't seem to boot any version of Solaris
though I had heard this did work. Solaris 8 and 9 do work nicely with
this ROM, but I am opening this to see if it is possible to fix this to
allow the original OBP ROM to see multiple processors.
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1759338
Title:
qemu-system-sparc w/ SS-20 ROM does not add processors
Status in QEMU:
New
Bug description:
When booting a SPARCstation-20 with the original ROM, qemu does not
set the number of processors in a way that this ROM can understand it,
and the ROM always reports only 1 processor installed:
~/qemu /usr/local/bin/qemu-system-sparc -bios ./ss20_v2.25_rom -M SS-20
-cpu "TI SuperSparc 60" -smp 2 -nographic
Power-ON Reset
SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95)
CPU_#0 TI, TMS390Z50(3.x) 0Mb External cache
CPU_#1 ******* NOT installed *******
CPU_#2 ******* NOT installed *******
CPU_#3 ******* NOT installed *******
<<< CPU_00000000 on MBus Slot_00000000 >>> IS RUNNING (MID =
00000008)
...
Cpu #0 TI,TMS390Z50
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
...
SPARCstation 20 (1 X 390Z50), No Keyboard
ROM Rev. 2.25, 128 MB memory installed, Serial #1193046.
Ethernet address 52:54:0:12:34:56, Host ID: 72123456.
(It is necessary use SS-20 since it is the only sun4m model that supports
512MB RAM, and I can't get Solaris to install on the SS-20 using OpenBIOS.)
When booting with OpenBIOS I can't seem to boot any version of Solaris
though I had heard this did work. Solaris 8 and 9 do work nicely with
this ROM, but I am opening this to see if it is possible to fix this
to allow the original OBP ROM to see multiple processors.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [Bug 1759338] [NEW] qemu-system-sparc w/ SS-20 ROM does not add processors,
address@hidden <=