qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v1 for-2.13 3/4] pc-bios/s390-ccw/net: Add suppo


From: Thomas Huth
Subject: Re: [Qemu-devel] [PATCH v1 for-2.13 3/4] pc-bios/s390-ccw/net: Add support for pxelinux-style config files
Date: Thu, 19 Apr 2018 10:17:15 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.7.0

On 19.04.2018 09:41, Viktor VM Mihajlovski wrote:
> On 18.04.2018 14:31, Thomas Huth wrote:
>> Since it is quite cumbersome to manually create a combined kernel with
>> initrd image for network booting, we now support loading via pxelinux
>> configuration files, too. In these files, the kernel, initrd and command
>> line parameters can be specified seperately, and the firmware then takes
>> care of glueing everything together in memory after the files have been
>> downloaded.
>>
>> Signed-off-by: Thomas Huth <address@hidden>
>> ---
>>  pc-bios/s390-ccw/netboot.mak |   5 +-
>>  pc-bios/s390-ccw/netmain.c   | 203 
>> +++++++++++++++++++++++++++++++++++++++++--
>>  2 files changed, 201 insertions(+), 7 deletions(-)
>>
>> diff --git a/pc-bios/s390-ccw/netboot.mak b/pc-bios/s390-ccw/netboot.mak
>> index a25d238..8db9573 100644
>> --- a/pc-bios/s390-ccw/netboot.mak
>> +++ b/pc-bios/s390-ccw/netboot.mak
>> @@ -24,8 +24,9 @@ CTYPE_OBJS = isdigit.o isxdigit.o toupper.o
>>  %.o : $(SLOF_DIR)/lib/libc/ctype/%.c
>>      $(call quiet-command,$(CC) $(LIBC_CFLAGS) -c -o $@ 
>> $<,"CC","$(TARGET_DIR)$@")
>>
>> -STRING_OBJS = strcat.o strchr.o strcmp.o strcpy.o strlen.o strncmp.o 
>> strncpy.o \
>> -          strstr.o memset.o memcpy.o memmove.o memcmp.o
>> +STRING_OBJS = strcasecmp.o strcat.o strchr.o strcmp.o strcpy.o strlen.o \
>> +          strncasecmp.o strncmp.o strncpy.o strstr.o \
>> +          memset.o memcpy.o memmove.o memcmp.o
>>  %.o : $(SLOF_DIR)/lib/libc/string/%.c
>>      $(call quiet-command,$(CC) $(LIBC_CFLAGS) -c -o $@ 
>> $<,"CC","$(TARGET_DIR)$@")
>>
>> diff --git a/pc-bios/s390-ccw/netmain.c b/pc-bios/s390-ccw/netmain.c
>> index e11ed4e..fa62bfe 100644
>> --- a/pc-bios/s390-ccw/netmain.c
>> +++ b/pc-bios/s390-ccw/netmain.c
>> @@ -39,11 +39,17 @@
>>
>>  extern char _start[];
>>
>> +#define KERNEL_ADDR             ((void *)0L)
>> +#define KERNEL_MAX_SIZE         ((long)_start)
>> +#define ARCH_COMMAND_LINE_SIZE  896              /* Taken from Linux kernel 
>> */
>> +
>>  char stack[PAGE_SIZE * 8] __attribute__((aligned(PAGE_SIZE)));
>>  IplParameterBlock iplb __attribute__((aligned(PAGE_SIZE)));
>> +static char cfgbuf[2048];
>>
>>  static SubChannelId net_schid = { .one = 1 };
>>  static int ip_version = 4;
>> +static uint8_t mac[6];
>>  static uint64_t dest_timer;
>>
>>  static uint64_t get_timer_ms(void)
>> @@ -136,9 +142,15 @@ static int tftp_load(filename_ip_t *fnip, void *buffer, 
>> int len)
>>      rc = tftp(fnip, buffer, len, DEFAULT_TFTP_RETRIES, &tftp_err, 1, 1428,
>>                ip_version);
>>
>> -    if (rc > 0) {
>> -        printf("  TFTP: Received %s (%d KBytes)\n", fnip->filename,
>> -               rc / 1024);
>> +    if (rc < 0) {
>> +        /* Make sure that error messages are put into a new line */
>> +        printf("\n  ");
>> +    }
>> +
>> +    if (rc > 1024) {
>> +        printf("  TFTP: Received %s (%d KBytes)\n", fnip->filename, rc / 
>> 1024);
>> +    } else if (rc > 0) {
>> +        printf("  TFTP: Received %s (%d Bytes)\n", fnip->filename, rc);
>>      } else if (rc == -1) {
>>          puts("unknown TFTP error");
>>      } else if (rc == -2) {
>> @@ -201,7 +213,6 @@ static int tftp_load(filename_ip_t *fnip, void *buffer, 
>> int len)
>>
>>  static int net_init(filename_ip_t *fn_ip)
>>  {
>> -    uint8_t mac[6];
>>      int rc;
>>
>>      memset(fn_ip, 0, sizeof(filename_ip_t));
>> @@ -276,6 +287,183 @@ static void net_uninit(filename_ip_t *fn_ip)
>>      virtio_net_uninit();
>>  }
>>
>> +/* This structure holds the data from one pxelinux.cfg file entry */
>> +struct lkia {
>> +    const char *label;
>> +    const char *kernel;
>> +    const char *initrd;
>> +    const char *append;
>> +};
>> +
>> +static int load_kernel_with_initrd(filename_ip_t *fn_ip, struct lkia *kia)
>> +{
>> +    int rc;
>> +
>> +    printf("Loading pxelinux.cfg entry '%s'\n", kia->label);
>> +
>> +    if (!kia->kernel) {
>> +        printf("Kernel entry is missing!\n");
>> +        return -1;
>> +    }
>> +
>> +    strncpy((char *)&fn_ip->filename, kia->kernel, sizeof(fn_ip->filename));
>> +    rc = tftp_load(fn_ip, KERNEL_ADDR, KERNEL_MAX_SIZE);
>> +    if (rc < 0) {
>> +        return rc;
>> +    }
>> +
>> +    if (kia->initrd) {
>> +        uint64_t iaddr = (rc + 0xfff) & ~0xfffUL;
>> +
>> +        strncpy((char *)&fn_ip->filename, kia->initrd, 
>> sizeof(fn_ip->filename));
>> +        rc = tftp_load(fn_ip, (void *)iaddr, KERNEL_MAX_SIZE - iaddr);
>> +        if (rc < 0) {
>> +            return rc;
>> +        }
>> +        /* Patch location and size: */
>> +        *(uint64_t *)0x10408 = iaddr;
>> +        *(uint64_t *)0x10410 = rc;
>> +        rc += iaddr;
>> +    }
>> +
>> +    if (kia->append) {
>> +        strncpy((char *)0x10480, kia->append, ARCH_COMMAND_LINE_SIZE);
>> +    }
>> +
>> +    return rc;
>> +}
>> +
>> +#define MAX_PXELINUX_ENTRIES 16
>> +
>> +/**
>> + * Parse a pxelinux-style configuration file.
>> + * See the following URL for more inforation about the config file syntax:
>> + * https://www.syslinux.org/wiki/index.php?title=PXELINUX
>> + */
>> +static int handle_pxelinux_cfg(filename_ip_t *fn_ip, char *cfg, int cfgsize)
>> +{
>> +    struct lkia entries[MAX_PXELINUX_ENTRIES];
>> +    int num_entries = 0;
>> +    char *ptr = cfg, *eol, *arg;
>> +    char *defaultlabel = NULL;
>> +    int def_ent = 0;
>> +
>> +    while (ptr < cfg + cfgsize && num_entries < MAX_PXELINUX_ENTRIES) {
>> +        eol = strchr(ptr, '\n');
>> +        if (!eol) {
>> +            eol = cfg + cfgsize;
>> +        }
>> +        if (eol > ptr && *(eol - 1) == '\r') {
>> +            *(eol - 1) = 0;
>> +        }
>> +        *eol = '\0';
>> +        while (*ptr == ' ' || *ptr == '\t') {
>> +            ptr++;
>> +        }
>> +        if (*ptr == 0 || *ptr == '#') {   /* Ignore comments and empty 
>> lines */
>> +            goto nextline;
>> +        }
>> +        arg = strchr(ptr, ' ');    /* Look for space between command and 
>> arg */
>> +        if (!arg) {
>> +            arg = strchr(ptr, '\t');
>> +        }
>> +        if (!arg) {
>> +            printf("Failed to parse the following line:\n %s\n", ptr);
>> +            goto nextline;
>> +        }
>> +        *arg++ = 0;
>> +        while (*arg == ' ' || *arg == '\t') {
>> +            arg++;
>> +        }
>> +        if (!strcasecmp("default", ptr)) {
>> +            defaultlabel = arg;
>> +        } else if (!strcasecmp("label", ptr)) {
>> +            entries[num_entries].label = arg;
>> +            if (defaultlabel && !strcmp(arg, defaultlabel)) {
>> +                def_ent = num_entries;
>> +            }
>> +            num_entries++;
>> +        } else if (!strcasecmp("kernel", ptr)) {
>> +            entries[num_entries - 1].kernel = arg;
>> +        } else if (!strcasecmp("initrd", ptr)) {
>> +            entries[num_entries - 1].initrd = arg;
>> +        } else if (!strcasecmp("append", ptr)) {
>> +            entries[num_entries - 1].append = arg;
>> +        } else {
>> +            printf("Command '%s' is not supported.\n", ptr);
>> +        }
>> +nextline:
>> +        ptr = eol + 1;
>> +    }
>> +
>> +    return load_kernel_with_initrd(fn_ip, &entries[def_ent]);
>> +}
>> +
>> +static int net_try_pxelinux_cfgs(filename_ip_t *fn_ip)
>> +{
>> +    int rc, idx;
>> +
>> +    cfgbuf[sizeof(cfgbuf) - 1] = 0;   /* Make sure that it is 
>> NUL-terminated */
>> +
>> +    printf("Trying pxelinux.cfg files...\n");
>> +
>> +    /* Look for config file with MAC address in its name */
>> +    sprintf((char *)fn_ip->filename,
>> +            "pxelinux.cfg/%02x-%02x-%02x-%02x-%02x-%02x",
>> +            mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
>> +    rc = tftp_load(fn_ip, cfgbuf, sizeof(cfgbuf) - 1);
>> +    if (rc > 0) {
>> +        return handle_pxelinux_cfg(fn_ip, cfgbuf, sizeof(cfgbuf));
>> +    }
>> +
>> +    /* Look for config file with IP address in its name */
>> +    if (ip_version == 4) {
>> +        for (idx = 0; idx <= 7; idx++) {
>> +            sprintf((char *)fn_ip->filename,
>> +                    "pxelinux.cfg/%02X%02X%02X%02X",
>> +                    (fn_ip->own_ip >> 24) & 0xff, (fn_ip->own_ip >> 16) & 
>> 0xff,
>> +                    (fn_ip->own_ip >> 8) & 0xff, fn_ip->own_ip & 0xff);
>> +            fn_ip->filename[strlen((char *)fn_ip->filename) - idx] = 0;
>> +            rc = tftp_load(fn_ip, cfgbuf, sizeof(cfgbuf) - 1);
>> +            if (rc > 0) {
>> +                return handle_pxelinux_cfg(fn_ip, cfgbuf, sizeof(cfgbuf));
>> +            }
>> +        }
>> +    }
>> +
>> +    /* Try "default" config file */
>> +    strcpy((char *)fn_ip->filename, "pxelinux.cfg/default");
>> +    rc = tftp_load(fn_ip, cfgbuf, sizeof(cfgbuf) - 1);
>> +    if (rc > 0) {
>> +        return handle_pxelinux_cfg(fn_ip, cfgbuf, sizeof(cfgbuf));
>> +    }
>> +
>> +    return -1;
>> +}
>> +
>> +static int net_try_direct_tftp_load(filename_ip_t *fn_ip)
>> +{
>> +    int rc;
>> +    void *baseaddr = (void *)0x2000;  /* Load right after the low-core */
>> +
>> +    rc = tftp_load(fn_ip, baseaddr, KERNEL_MAX_SIZE - (long)baseaddr);
>> +
>> +    if (rc > 0 && rc < sizeof(cfgbuf) - 1) {
>> +        /* Check whether it is a configuration file instead of a kernel */
> That's interesting because treating the bootfile as pxe-ish config is
> what DPM does. Which means that with this change the processor
> architecture type 0x1f (Basic) will turn into a superset of 0x20
> (Extended).

Is there any reference available what "basic" and "extended" exactly
mean? I just know that there are these two values registered by you at
the IANA:

https://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xhtml#processor-architecture

... but I haven't seen a description of the differences of these two
values yet.

> I guess this should be documented somewhere(TM) to avoid
> confusion.

I plan to update https://wiki.qemu.org/Features/S390xNetworkBoot once
the patches have been merged upstream.

>> +        memcpy(cfgbuf, baseaddr, rc);
>> +        cfgbuf[rc] = 0;    /* Make sure that it is NUL-terminated */
>> +        if (!strncasecmp("default", cfgbuf, 7) || !strncmp("# ", cfgbuf, 
>> 2)) {
>> +            /* Looks like it is a pxelinux.cfg */
>> +            return handle_pxelinux_cfg(fn_ip, cfgbuf, rc);> +        }
>> +    }
>> +
>> +    /* Move kernel to right location */
>> +    memmove(KERNEL_ADDR, baseaddr, rc);
> Move this into the if block above. If the tftp_load fails with rc < 0
> bad things will happen...

Oops, good catch, this should of course only be done if rc > 0 ... will
fix it in v2.

 Thomas




reply via email to

[Prev in Thread] Current Thread [Next in Thread]