[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] ccid: Fix dwProtocols advertisement of T=0
From: |
Jason Andryuk |
Subject: |
[Qemu-devel] [PATCH] ccid: Fix dwProtocols advertisement of T=0 |
Date: |
Fri, 20 Apr 2018 14:32:19 -0400 |
Commit d7d218ef02d87c637d20d64da8f575d434ff6f78 attempted to change
dwProtocols to only advertise support for T=0 and not T=1. The change
was incorrect as it changed 0x00000003 to 0x00010000.
lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:
Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader
may not be functioning correctly
Command Header: 03 00 00 00
Setting to 0x00000001 fixes the Windows issue.
Signed-off-by: Jason Andryuk <address@hidden>
Cc: address@hidden
---
hw/usb/dev-smartcard-reader.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/usb/dev-smartcard-reader.c b/hw/usb/dev-smartcard-reader.c
index e6468057a0..cabb564788 100644
--- a/hw/usb/dev-smartcard-reader.c
+++ b/hw/usb/dev-smartcard-reader.c
@@ -329,8 +329,8 @@ static const uint8_t qemu_ccid_descriptor[] = {
*/
0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */
- 0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
- 0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
+ 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
+ 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
/* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
0xa0, 0x0f, 0x00, 0x00,
/* u32 dwMaximumClock; */
--
2.14.3
- [Qemu-devel] [PATCH] ccid: Fix dwProtocols advertisement of T=0,
Jason Andryuk <=