[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 0/3] aspeed: introduce the APB clock settings

From: Cédric Le Goater
Subject: [Qemu-devel] [PATCH 0/3] aspeed: introduce the APB clock settings
Date: Fri, 22 Jun 2018 00:39:43 +0200


The Aspeed SoC clocks are driven by an input source clock which can
have different frequencies : 24MHz or 25MHz, and also, on the Aspeed
AST2400 SoC, 48MHz. The H-PLL (CPU) clock is defined from a calculation
using parameters in the H-PLL Parameter register or from a predefined
set of frequencies if the setting is strapped by hardware (Aspeed
AST2400 SoC). The other clocks of the SoC are then defined from the
H-PLL using dividers.

We first introduce the APB clock because it drives the timer model.
This fixes a slowdown issue on the palmetto machine (AST2400) when
running Linux. The latest Linux versions take into account more
precisely the SoC settings for the clocks and the APB freq is set to
48MHz but modeled at 24MHz by QEMU.



Cédric Le Goater (3):
  aspeed/scu: introduce clock frequencies
  aspeed: initialize the SCU controller first
  aspeed/timer: use the APB frequency from the SCU

 include/hw/misc/aspeed_scu.h    |  70 ++++++++++++++++++++++++--
 include/hw/timer/aspeed_timer.h |   4 ++
 hw/arm/aspeed_soc.c             |  42 ++++++++--------
 hw/misc/aspeed_scu.c            | 106 ++++++++++++++++++++++++++++++++++++++++
 hw/timer/aspeed_timer.c         |  19 +++++--
 5 files changed, 213 insertions(+), 28 deletions(-)


reply via email to

[Prev in Thread] Current Thread [Next in Thread]