[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [virtio-dev] [PATCH v3 2/3] Add "Group Identifier" supp
From: |
Siwei Liu |
Subject: |
Re: [Qemu-devel] [virtio-dev] [PATCH v3 2/3] Add "Group Identifier" support to Red Hat PCI bridge. |
Date: |
Mon, 2 Jul 2018 20:13:31 -0700 |
On Fri, Jun 29, 2018 at 3:19 PM, Venu Busireddy
<address@hidden> wrote:
> Add the "Vendor-Specific" capability to the Red Hat PCI bridge device
> "pci-bridge", to contain the "Group Identifier" that will be used to pair
> a virtio device with the passthrough device attached to that bridge. Also,
> change the Device ID of the bridge to PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER
> to avoid confusion with bridges that don't have this capability.
>
> This capability is added to the bridge iff the "failover-group-id"
> option is specified for the bridge.
>
> Signed-off-by: Venu Busireddy <address@hidden>
> ---
> hw/pci-bridge/pci_bridge_dev.c | 10 ++++++++++
> hw/pci/pci_bridge.c | 34 +++++++++++++++++++++++++++++++++
> include/hw/pci/pci.h | 35 +++++++++++++++++-----------------
> include/hw/pci/pci_bridge.h | 2 ++
> 4 files changed, 64 insertions(+), 17 deletions(-)
>
> diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
> index b2d861d216..d3879071a8 100644
> --- a/hw/pci-bridge/pci_bridge_dev.c
> +++ b/hw/pci-bridge/pci_bridge_dev.c
> @@ -71,6 +71,13 @@ static void pci_bridge_dev_realize(PCIDevice *dev, Error
> **errp)
> bridge_dev->msi = ON_OFF_AUTO_OFF;
> }
>
> + err = pci_bridge_vendor_init(dev, 0,
> PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER,
> + errp);
> + if (err < 0) {
> + error_append_hint(errp, "Can't init group ID, error %d\n", err);
> + goto vendor_cap_err;
> + }
> +
> err = slotid_cap_init(dev, 0, bridge_dev->chassis_nr, 0, errp);
> if (err) {
> goto slotid_error;
> @@ -109,6 +116,7 @@ slotid_error:
> if (shpc_present(dev)) {
> shpc_cleanup(dev, &bridge_dev->bar);
> }
> +vendor_cap_err:
> shpc_error:
> pci_bridge_exitfn(dev);
> }
> @@ -162,6 +170,8 @@ static Property pci_bridge_dev_properties[] = {
> ON_OFF_AUTO_AUTO),
> DEFINE_PROP_BIT(PCI_BRIDGE_DEV_PROP_SHPC, PCIBridgeDev, flags,
> PCI_BRIDGE_DEV_F_SHPC_REQ, true),
> + DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID,
> + PCIDevice, failover_group_id, ULLONG_MAX),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
> index 40a39f57cb..68cc619c20 100644
> --- a/hw/pci/pci_bridge.c
> +++ b/hw/pci/pci_bridge.c
> @@ -40,6 +40,10 @@
> #define PCI_SSVID_SVID 4
> #define PCI_SSVID_SSID 6
>
> +#define PCI_VENDOR_SIZEOF 12
> +#define PCI_VENDOR_CAP_LEN_OFFSET 2
> +#define PCI_VENDOR_GROUP_ID_OFFSET 4
> +
> int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
> uint16_t svid, uint16_t ssid,
> Error **errp)
> @@ -57,6 +61,36 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
> return pos;
> }
>
> +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset,
> + uint16_t device_id, Error **errp)
> +{
> + int pos;
> + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d);
> +
> + if (d->failover_group_id == ULLONG_MAX) {
> + return 0;
> + }
> +
> + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF,
> + errp);
> + if (pos < 0) {
> + return pos;
> + }
> +
> + /*
> + * Tweak the Device ID to avoid confusion
> + * with bridges that don't have the group id capability.
> + */
> + dc->device_id = device_id;
> + pci_set_word(d->config + PCI_DEVICE_ID, device_id);
> +
> + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET,
> + PCI_VENDOR_SIZEOF);
> + memcpy(d->config + pos + PCI_VENDOR_GROUP_ID_OFFSET,
> + &d->failover_group_id, sizeof(uint64_t));
You should use pci_set_quad() on a 64bit value instead to avoid
potential endianess issue.
-Siwei
> + return pos;
> +}
> +
> /* Accessor function to get parent bridge device from pci bus. */
> PCIDevice *pci_bridge_get_device(PCIBus *bus)
> {
> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> index b59c3e7e38..bc38032761 100644
> --- a/include/hw/pci/pci.h
> +++ b/include/hw/pci/pci.h
> @@ -86,23 +86,24 @@ extern bool pci_available;
> #define PCI_DEVICE_ID_VIRTIO_9P 0x1009
> #define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012
>
> -#define PCI_VENDOR_ID_REDHAT 0x1b36
> -#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001
> -#define PCI_DEVICE_ID_REDHAT_SERIAL 0x0002
> -#define PCI_DEVICE_ID_REDHAT_SERIAL2 0x0003
> -#define PCI_DEVICE_ID_REDHAT_SERIAL4 0x0004
> -#define PCI_DEVICE_ID_REDHAT_TEST 0x0005
> -#define PCI_DEVICE_ID_REDHAT_ROCKER 0x0006
> -#define PCI_DEVICE_ID_REDHAT_SDHCI 0x0007
> -#define PCI_DEVICE_ID_REDHAT_PCIE_HOST 0x0008
> -#define PCI_DEVICE_ID_REDHAT_PXB 0x0009
> -#define PCI_DEVICE_ID_REDHAT_BRIDGE_SEAT 0x000a
> -#define PCI_DEVICE_ID_REDHAT_PXB_PCIE 0x000b
> -#define PCI_DEVICE_ID_REDHAT_PCIE_RP 0x000c
> -#define PCI_DEVICE_ID_REDHAT_XHCI 0x000d
> -#define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e
> -#define PCI_DEVICE_ID_REDHAT_MDPY 0x000f
> -#define PCI_DEVICE_ID_REDHAT_QXL 0x0100
> +#define PCI_VENDOR_ID_REDHAT 0x1b36
> +#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001
> +#define PCI_DEVICE_ID_REDHAT_SERIAL 0x0002
> +#define PCI_DEVICE_ID_REDHAT_SERIAL2 0x0003
> +#define PCI_DEVICE_ID_REDHAT_SERIAL4 0x0004
> +#define PCI_DEVICE_ID_REDHAT_TEST 0x0005
> +#define PCI_DEVICE_ID_REDHAT_ROCKER 0x0006
> +#define PCI_DEVICE_ID_REDHAT_SDHCI 0x0007
> +#define PCI_DEVICE_ID_REDHAT_PCIE_HOST 0x0008
> +#define PCI_DEVICE_ID_REDHAT_PXB 0x0009
> +#define PCI_DEVICE_ID_REDHAT_BRIDGE_SEAT 0x000a
> +#define PCI_DEVICE_ID_REDHAT_PXB_PCIE 0x000b
> +#define PCI_DEVICE_ID_REDHAT_PCIE_RP 0x000c
> +#define PCI_DEVICE_ID_REDHAT_XHCI 0x000d
> +#define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e
> +#define PCI_DEVICE_ID_REDHAT_MDPY 0x000f
> +#define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER 0x0010
> +#define PCI_DEVICE_ID_REDHAT_QXL 0x0100
>
> #define FMT_PCIBUS PRIx64
>
> diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
> index 0347da52d2..aa471ec5a4 100644
> --- a/include/hw/pci/pci_bridge.h
> +++ b/include/hw/pci/pci_bridge.h
> @@ -83,6 +83,8 @@ struct PCIBridge {
> int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
> uint16_t svid, uint16_t ssid,
> Error **errp);
> +int pci_bridge_vendor_init(PCIDevice *dev, uint8_t offset,
> + uint16_t device_id, Error **errp);
>
> PCIDevice *pci_bridge_get_device(PCIBus *bus);
> PCIBus *pci_bridge_get_sec_bus(PCIBridge *br);
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: address@hidden
> For additional commands, e-mail: address@hidden
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [virtio-dev] [PATCH v3 2/3] Add "Group Identifier" support to Red Hat PCI bridge.,
Siwei Liu <=