[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 3/3] i.MX6UL: Add Freescale i.MX6 UltraLite 14x1
From: |
Peter Maydell |
Subject: |
Re: [Qemu-devel] [PATCH 3/3] i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK Board |
Date: |
Tue, 17 Jul 2018 16:01:02 +0100 |
On 30 June 2018 at 22:58, Jean-Christophe Dubois <address@hidden> wrote:
> Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the
> emulated board.
>
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
> hw/arm/Makefile.objs | 2 +-
> hw/arm/mcimx6ul-evk.c | 86 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 87 insertions(+), 1 deletion(-)
> create mode 100644 hw/arm/mcimx6ul-evk.c
>
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index e419ad040b..2902f47b4c 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -36,4 +36,4 @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o
> obj-$(CONFIG_IOTKIT) += iotkit.o
> obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o
> obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o
> -obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o
> +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o
> diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c
> new file mode 100644
> index 0000000000..7d1b3c97df
> --- /dev/null
> +++ b/hw/arm/mcimx6ul-evk.c
> @@ -0,0 +1,86 @@
> +/*
> + * Copyright (c) 2018 Jean-Christophe Dubois <address@hidden>
> + *
> + * MCIMX6UL_EVK Board System emulation.
> + *
> + * This code is licensed under the GPL, version 2 or later.
> + * See the file `COPYING' in the top level directory.
> + *
> + * It (partially) emulates a mcimx6ul_evk board, with a Freescale
> + * i.MX6ul SoC
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "qemu-common.h"
> +#include "hw/arm/fsl-imx6ul.h"
> +#include "hw/boards.h"
> +#include "sysemu/sysemu.h"
> +#include "qemu/error-report.h"
> +#include "sysemu/qtest.h"
> +
> +typedef struct {
> + FslIMX6ULState soc;
> + MemoryRegion ram;
> +} MCIMX6ULEVK;
> +
> +static void mcimx6ul_evk_init(MachineState *machine)
> +{
> + static struct arm_boot_info boot_info;
> + MCIMX6ULEVK *s = g_new0(MCIMX6ULEVK, 1);
> + Object *soc;
> + int i;
> +
> + if (machine->ram_size > FSL_IMX6UL_MMDC_SIZE) {
> + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)",
> + machine->ram_size, FSL_IMX6UL_MMDC_SIZE);
> + exit(1);
> + }
> +
> + boot_info = (struct arm_boot_info) {
> + .loader_start = FSL_IMX6UL_MMDC_ADDR,
> + .board_id = -1,
> + .ram_size = machine->ram_size,
> + .kernel_filename = machine->kernel_filename,
> + .kernel_cmdline = machine->kernel_cmdline,
> + .initrd_filename = machine->initrd_filename,
> + .nb_cpus = smp_cpus,
> + };
> +
> + object_initialize(&s->soc, sizeof(s->soc), TYPE_FSL_IMX6UL);
> + soc = OBJECT(&s->soc);
> + object_property_add_child(OBJECT(machine), "soc", soc, &error_fatal);
This should use object_initialize_child() rather than
object_initialize() + object_property_add_child().
> + object_property_set_bool(soc, true, "realized", &error_fatal);
Otherwise this patch looks good.
thanks
-- PMM
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH 3/3] i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK Board,
Peter Maydell <=