[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [qemu-s390x] [RFC 14/15] s390-bios: Support booting fro
Re: [Qemu-devel] [qemu-s390x] [RFC 14/15] s390-bios: Support booting from real dasd device
Wed, 18 Jul 2018 12:55:51 +0200
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.8.0
On 07/18/2018 09:40 AM, Cornelia Huck wrote:
On Tue, 17 Jul 2018 22:43:27 +0200
David Hildenbrand <address@hidden> wrote:
On 05.07.2018 19:25, Jason J. Herne wrote:
+***** How this all pertains to Qemu *****
+In theory we should merely have to do the following to IPL/boot a guest
+operating system from a DASD device:
+1. Place a "Read IPL" ccw into memory location 0x0 with chaining bit on.
+2. Execute channel program at 0x0.
+3. LPSW 0x0.
+However, our emulation of the machine's channel program logic is missing one
+feature that is required for this process to work: non-prefetch of ccw data.
+When we start a channel program we pass the channel subsystem parameters via an
+ORB (Operation Request Block). One of those parameters is a prefetch bit. If
+bit is on then Qemu is allowed to read the entire channel program from guest
+memory before it starts executing it. This means that any channel commands that
+read additional channel commands will not work as expected because the newly
+read commands will only exist in guest memory and NOT within Qemu's channel
+subsystem memory. Qemu's channel subsystem's implementation currently requires
+this bit to be on for all channel programs. This is a problem because the IPL
+process consists of transferring control from the "Read IPL" ccw immediately to
+the IPL1 channel program that was read by "Read IPL".
I have way too little insight into channel devices and how QEMU
implements them, however I wonder what hinders us from implementing
support for !prefetch in QEMU?
What you tailored here seems impressive :) Just want to know what the
technical background of this prefetch thingy in QEMU is.
This has to do with how vfio-ccw processes and translates channel
Currently, we hand over the chain of channel commands to the kernel to
be translated (guest->host addresses) and to execute ssch on the real
subchannel. However, this requires sending the channel program over in
one go, which makes it impossible for the guest to modify an in-flight
channel program (there are tricks like putting a suspend marker on a
channel command and moving that marker forward as you go which make it
possible to know that a channel command has not yet been processed;
IIRC the lcs driver in Linux does that, or at least used to do that).
Our implementation currently does not accommodate that (the Linux dasd
driver does not use that feature). It's not impossible to implement it,
but it would require some effort (and I don't think anybody currently
has spare time for that...)
I disagree, IMHO we can not implement generic support for !prefetch in
vfio-ccw with what we have at our disposal at the abstraction level we
are currently working on. (If we were to abandon using IO instructions
in the host but rely on lower level protocols like FC it may be possible,
I don't want to make a statement about that).
The problem is the address translation. If the channel program reads
something that is going to be used as a ccw by the same (e.g. CCW-IPL)
the address within that ccw that was read is a guest-physical address.
We however need to translate the addresses in the guest ccws (and in the
(m)idaw's) too before these get executed as a part of a host channel
program. And because the address of the ccws themselves needs to be
31 bit addressable in host physical we actually copy the channel program
form guest memory to suitable host memory in the vfio-ccw driver.
So to translate the new stuff we would actually have to stop the channel
program and resubmit the rest (either by suspend+resume or by break
chaining+ssch). The problem with that an execution of a channel program
that is composed of four ccws A,B,C,D and an execution of a channel
programs composed of ccws A,B immediately followed by and execution
of a channel program composed of the ccws C,D is not the same. I.e. it
is not generally safe to break a chain of ccws.
If you still think it's possible to implement !prefetch, could you please
explain your idea.
Re: [Qemu-devel] [RFC 14/15] s390-bios: Support booting from real dasd device, Halil Pasic, 2018/07/18
Re: [Qemu-devel] [RFC 00/15] s390: vfio-ccw dasd ipl support, no-reply, 2018/07/05
Re: [Qemu-devel] [RFC 00/15] s390: vfio-ccw dasd ipl support, Cornelia Huck, 2018/07/06
- Re: [Qemu-devel] [RFC 02/15] s390-bios: decouple cio setup from virtio, (continued)