[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in
From: |
Stefan Hajnoczi |
Subject: |
Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host |
Date: |
Thu, 26 Jul 2018 15:52:14 +0100 |
User-agent: |
Mutt/1.10.0 (2018-05-17) |
On Thu, Jul 12, 2018 at 07:33:14AM +0000, Elijah Shakkour wrote:
> Hey,
>
> Our team is adding a NIC functional emulation to QEMU.
> One of the features we are adding to this NIC is SRIOV.
>
> Here is the error message I get when checking SRIOV support of our emulated
> NIC on Win2016 server (the hyper-v VM).
> "
> SR-IOV cannot be used on this system as the PCI Express hardware does not
> support Access Control Services (ACS) at any root port. Contact your system
> vendor for further information.
> "
I'm not sure what the status of emulated SR-IOV is so I have CCed
Michael Tsirkin and Marcel Apfelbaum, the PCI maintainers in QEMU.
>
> Could you please advise about what could be the issue here?
>
> BTW: I use same configuration (VM XML file attached) when running linux VM
> (RH7.2) image (instead of Win Hyper-V) over the same host and SRIOV is
> working for me there.
>
> Here the XML file I use to define the VM (our emulated NIC is added at the
> end of XML):
> "
> <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
> <name>nst105</name>
> <uuid>0249a525-2ee2-432b-a1f5-a6db83b089a3</uuid>
> <memory unit='KiB'>8388608</memory>
> <currentMemory unit='KiB'>8388608</currentMemory>
> <vcpu placement='static'>8</vcpu>
> <resource>
> <partition>/machine</partition>
> </resource>
> <os>
> <type arch='x86_64' machine='pc-q35-2.11'>hvm</type>
> </os>
> <features>
> <acpi/>
> <apic/>
> <hyperv>
> <relaxed state='on'/>
> <vapic state='on'/>
> <spinlocks state='on' retries='8191'/>
> </hyperv>
> </features>
> <cpu mode='custom' match='exact' check='none'>
> <model fallback='forbid'>SandyBridge</model>
> <feature policy='require' name='hypervisor'/>
> <feature policy='require' name='vmx'/>
> </cpu>
> <clock offset='localtime'>
> <timer name='rtc' tickpolicy='catchup'/>
> <timer name='pit' tickpolicy='delay'/>
> <timer name='hpet' present='no'/>
> <timer name='hypervclock' present='yes'/>
> </clock>
> <on_poweroff>destroy</on_poweroff>
> <on_reboot>restart</on_reboot>
> <on_crash>destroy</on_crash>
> <pm>
> <suspend-to-mem enabled='no'/>
> <suspend-to-disk enabled='no'/>
> </pm>
> <devices>
> <emulator>/opt/qemu/bin/qemu-system-x86_64</emulator>
> <disk type='file' device='disk'>
> <driver name='qemu' type='qcow2'/>
> <source file='/images/nst105.qcow2'/>
> <target dev='sda' bus='sata'/>
> <boot order='2'/>
> <address type='drive' controller='0' bus='0' target='0' unit='0'/>
> </disk>
> <controller type='usb' index='0' model='ich9-ehci1'>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x1d'
> function='0x7'/>
> </controller>
> <controller type='usb' index='0' model='ich9-uhci1'>
> <master startport='0'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x1d'
> function='0x0' multifunction='on'/>
> </controller>
> <controller type='usb' index='0' model='ich9-uhci2'>
> <master startport='2'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x1d'
> function='0x1'/>
> </controller>
> <controller type='usb' index='0' model='ich9-uhci3'>
> <master startport='4'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x1d'
> function='0x2'/>
> </controller>
> <controller type='sata' index='0'>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f'
> function='0x2'/>
> </controller>
> <controller type='pci' index='0' model='pcie-root'/>
> <controller type='pci' index='1' model='pcie-root-port'>
> <model name='pcie-root-port'/>
> <target chassis='1' port='0x10'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
> function='0x0' multifunction='on'/>
> </controller>
> <controller type='pci' index='2' model='pcie-root-port'>
> <model name='pcie-root-port'/>
> <target chassis='2' port='0x11'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
> function='0x1'/>
> </controller>
> <controller type='pci' index='3' model='pcie-root-port'>
> <model name='pcie-root-port'/>
> <target chassis='3' port='0x12'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
> function='0x2'/>
> </controller>
> <controller type='pci' index='4' model='dmi-to-pci-bridge'>
> <model name='i82801b11-bridge'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e'
> function='0x0'/>
> </controller>
> <controller type='pci' index='5' model='pci-bridge'>
> <model name='pci-bridge'/>
> <target chassisNr='5'/>
> <address type='pci' domain='0x0000' bus='0x04' slot='0x00'
> function='0x0'/>
> </controller>
> <interface type='bridge'>
> <mac address='00:50:56:1b:dd:6f'/>
> <source bridge='br0'/>
> <model type='virtio'/>
> <boot order='1'/>
> <address type='pci' domain='0x0000' bus='0x01' slot='0x00'
> function='0x0'/>
> </interface>
> <serial type='pty'>
> <target port='0'/>
> </serial>
> <console type='pty'>
> <target type='serial' port='0'/>
> </console>
> <input type='tablet' bus='usb'>
> <address type='usb' bus='0' port='1'/>
> </input>
> <input type='mouse' bus='ps2'/>
> <input type='keyboard' bus='ps2'/>
> <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'
> keymap='en-us'>
> <listen type='address' address='127.0.0.1'/>
> </graphics>
> <video>
> <model type='vga' vram='16384' heads='1' primary='yes'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x01'
> function='0x0'/>
> </video>
> <memballoon model='virtio'>
> <address type='pci' domain='0x0000' bus='0x02' slot='0x00'
> function='0x0'/>
> </memballoon>
> </devices>
> <seclabel type='none' model='none'/>
> <seclabel type='dynamic' model='dac' relabel='yes'/>
> <qemu:commandline>
> <qemu:arg value='-device'/>
> <qemu:arg
> value='pcie-root-port,pref64-reserve=500M,slot=0,id=pcie_port.1'/>
> <qemu:arg value='-netdev'/>
> <qemu:arg value='tap,id=tap5,ifname=tap5,script=no,downscript=no'/>
> <qemu:arg value='-device'/>
> <qemu:arg value='my_emu_nic,netdev=tap5,bus=pcie_port.1'/>
> </qemu:commandline>
> </domain>
> "
> ______________________
> General info:
> Host OS: RH7.0 (Kernel: 4.14.13)
> QEMU version: 2.11
> libvirt version: 3.2.0
> Running the following on the host shows that both nested and IOMMU are
> enabled:
> ~]#: cat /sys/module/kvm_intel/parameters/nested
> Y
> ~]# dmesg | grep -e DMAR -e IOMMU
> [ 0.000000] DMAR: IOMMU enabled
>
> Thanks,
> Elijah
>
signature.asc
Description: PGP signature
- [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Elijah Shakkour, 2018/07/12
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host,
Stefan Hajnoczi <=
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Marcel Apfelbaum, 2018/07/26
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Alex Williamson, 2018/07/26
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Michael S. Tsirkin, 2018/07/26
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Knut Omang, 2018/07/26
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Alex Williamson, 2018/07/26
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Knut Omang, 2018/07/26
- Re: [Qemu-devel] Question: SRIOV support over Win Hyper-V VM running in QEMU process on Linux host, Michael S. Tsirkin, 2018/07/26