[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL v3 21/46] target/mips: Implement emulation of nanoMIP
From: |
Aleksandar Markovic |
Subject: |
[Qemu-devel] [PULL v3 21/46] target/mips: Implement emulation of nanoMIPS ROTX instruction |
Date: |
Tue, 21 Aug 2018 15:31:31 +0200 |
From: Matthew Fortune <address@hidden>
Added a helper for ROTX based on the pseudocode from the
architecture spec. This instraction was not present in previous
MIPS instruction sets.
Signed-off-by: Yongbok Kim <address@hidden>
Signed-off-by: Aleksandar Markovic <address@hidden>
Signed-off-by: Stefan Markovic <address@hidden>
Reviewed-by: Aleksandar Markovic <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
---
target/mips/helper.h | 2 ++
target/mips/op_helper.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++
target/mips/translate.c | 15 ++++++++
3 files changed, 111 insertions(+)
diff --git a/target/mips/helper.h b/target/mips/helper.h
index 5f49234..b2a780a 100644
--- a/target/mips/helper.h
+++ b/target/mips/helper.h
@@ -40,6 +40,8 @@ DEF_HELPER_FLAGS_1(bitswap, TCG_CALL_NO_RWG_SE, tl, tl)
DEF_HELPER_FLAGS_1(dbitswap, TCG_CALL_NO_RWG_SE, tl, tl)
#endif
+DEF_HELPER_FLAGS_4(rotx, TCG_CALL_NO_RWG_SE, tl, tl, i32, i32, i32)
+
#ifndef CONFIG_USER_ONLY
/* CP0 helpers */
DEF_HELPER_1(mfc0_mvpcontrol, tl, env)
diff --git a/target/mips/op_helper.c b/target/mips/op_helper.c
index 0b2663b..b3eef9f 100644
--- a/target/mips/op_helper.c
+++ b/target/mips/op_helper.c
@@ -249,6 +249,100 @@ target_ulong helper_bitswap(target_ulong rt)
return (int32_t)bitswap(rt);
}
+target_ulong helper_rotx(target_ulong rs, uint32_t shift, uint32_t shiftx,
+ uint32_t stripe)
+{
+ int i;
+ uint64_t tmp0 = ((uint64_t)rs) << 32 | ((uint64_t)rs & 0xffffffff);
+ uint64_t tmp1 = tmp0;
+ for (i = 0; i <= 46; i++) {
+ int s;
+ if (i & 0x8) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+
+ if (stripe != 0 && !(i & 0x4)) {
+ s = ~s;
+ }
+ if (s & 0x10) {
+ if (tmp0 & (1LL << (i + 16))) {
+ tmp1 |= 1LL << i;
+ } else {
+ tmp1 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp2 = tmp1;
+ for (i = 0; i <= 38; i++) {
+ int s;
+ if (i & 0x4) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+
+ if (s & 0x8) {
+ if (tmp1 & (1LL << (i + 8))) {
+ tmp2 |= 1LL << i;
+ } else {
+ tmp2 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp3 = tmp2;
+ for (i = 0; i <= 34; i++) {
+ int s;
+ if (i & 0x2) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+ if (s & 0x4) {
+ if (tmp2 & (1LL << (i + 4))) {
+ tmp3 |= 1LL << i;
+ } else {
+ tmp3 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp4 = tmp3;
+ for (i = 0; i <= 32; i++) {
+ int s;
+ if (i & 0x1) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+ if (s & 0x2) {
+ if (tmp3 & (1LL << (i + 2))) {
+ tmp4 |= 1LL << i;
+ } else {
+ tmp4 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp5 = tmp4;
+ for (i = 0; i <= 31; i++) {
+ int s;
+ s = shift;
+ if (s & 0x1) {
+ if (tmp4 & (1LL << (i + 1))) {
+ tmp5 |= 1LL << i;
+ } else {
+ tmp5 &= ~(1LL << i);
+ }
+ }
+ }
+
+ return (int64_t)(int32_t)(uint32_t)tmp5;
+}
+
#ifndef CONFIG_USER_ONLY
static inline hwaddr do_translate_address(CPUMIPSState *env,
diff --git a/target/mips/translate.c b/target/mips/translate.c
index b00d28b..7b2ffb2 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -17811,6 +17811,21 @@ static int decode_nanomips_32_48_opc(CPUMIPSState
*env, DisasContext *ctx)
}
break;
case NM_P_ROTX:
+ if (rt != 0) {
+ TCGv t0 = tcg_temp_new();
+ TCGv_i32 shift = tcg_const_i32(extract32(ctx->opcode, 0, 5));
+ TCGv_i32 shiftx = tcg_const_i32(extract32(ctx->opcode, 7, 4)
+ << 1);
+ TCGv_i32 stripe = tcg_const_i32(extract32(ctx->opcode, 6, 1));
+
+ gen_load_gpr(t0, rs);
+ gen_helper_rotx(cpu_gpr[rt], t0, shift, shiftx, stripe);
+ tcg_temp_free(t0);
+
+ tcg_temp_free_i32(shift);
+ tcg_temp_free_i32(shiftx);
+ tcg_temp_free_i32(stripe);
+ }
break;
case NM_P_INS:
switch (((ctx->opcode >> 10) & 2) |
--
2.7.4
- [Qemu-devel] [PULL v3 00/46] MIPS queue August 21, 2018 v3, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 06/46] target/mips: Add nanoMIPS decoding and extraction utilities, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 13/46] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 09/46] target/mips: Add emulation of nanoMIPS 16-bit shift instructions, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 05/46] target/mips: Add placeholder and invocation of decode_nanomips_opc(), Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 02/46] target/mips: Add nanoMIPS base instruction set opcodes, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 04/46] target/mips: Prevent switching mode related to Config3 ISA bit for nanoMIPS, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 14/46] target/mips: Add emulation of some common nanoMIPS 32-bit instructions, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 34/46] target/mips: Add emulation of DSP ASE for nanoMIPS - part 6, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 21/46] target/mips: Implement emulation of nanoMIPS ROTX instruction,
Aleksandar Markovic <=
- [Qemu-devel] [PULL v3 01/46] target/mips: Add preprocessor constants for nanoMIPS, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 15/46] target/mips: Add emulation of nanoMIPS instructions MOVE.P and MOVE.PREV, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 27/46] target/mips: Fix pre-nanoMIPS MT ASE instructions availability control, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 20/46] target/mips: Add emulation of misc nanoMIPS instructions (p_lsx), Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 33/46] target/mips: Add emulation of DSP ASE for nanoMIPS - part 5, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 31/46] target/mips: Add emulation of DSP ASE for nanoMIPS - part 3, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 25/46] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 28/46] target/mips: Implement MT ASE support for nanoMIPS, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 07/46] target/mips: Add emulation of nanoMIPS 16-bit arithmetic instructions, Aleksandar Markovic, 2018/08/21
- [Qemu-devel] [PULL v3 41/46] elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS, Aleksandar Markovic, 2018/08/21