[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 5/6] accel/tcg: Return -1 for execution from MMI

From: Richard Henderson
Subject: Re: [Qemu-devel] [PATCH 5/6] accel/tcg: Return -1 for execution from MMIO regions in get_page_addr_code()
Date: Thu, 15 Nov 2018 08:32:38 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.3.0

On 11/14/18 6:19 PM, Thomas Huth wrote:
> Program received signal SIGSEGV, Segmentation fault.
> [...]
> (gdb) bt
> #0  0x0000555555addc68 in onenand_read (opaque=0x555557600600, addr=98304, 
> size=4) at hw/block/onenand.c:612

So the crash is an off-by-one on the line above:

--- a/hw/block/onenand.c
+++ b/hw/block/onenand.c
@@ -608,7 +608,7 @@ static uint64_t onenand_read(void *opaque, hwaddr addr,
     int offset = addr >> s->shift;

     switch (offset) {
-    case 0x0000 ... 0xc000:
+    case 0x0000 ... 0xbfff:
         return lduw_le_p(s->boot[0] + addr);

     case 0xf000:       /* Manufacturer ID */

as the memory segment has size 0xc000.

The guest will now eventually crash with

onenand_read: unknown OneNAND register c000
onenand_read: unknown OneNAND register fefe
qemu: hardware error: onenand_read: implement ECC

CPU #0:
R00=00000000 R01=00000000 R02=00000000 R03=00000000
R04=00000000 R05=00000000 R06=00000000 R07=00000000
R08=00000000 R09=00000000 R10=00000000 R11=00000000
R12=00000000 R13=00000000 R14=00000000 R15=0001fe04
PSR=400001d3 -Z-- A svc32
s00=00000000 s01=00000000 d00=0000000000000000
s02=00000000 s03=00000000 d01=0000000000000000
s04=00000000 s05=00000000 d02=0000000000000000
s06=00000000 s07=00000000 d03=0000000000000000
s08=00000000 s09=00000000 d04=0000000000000000
s10=00000000 s11=00000000 d05=0000000000000000
s12=00000000 s13=00000000 d06=0000000000000000
s14=00000000 s15=00000000 d07=0000000000000000
s16=00000000 s17=00000000 d08=0000000000000000
s18=00000000 s19=00000000 d09=0000000000000000
s20=00000000 s21=00000000 d10=0000000000000000
s22=00000000 s23=00000000 d11=0000000000000000
s24=00000000 s25=00000000 d12=0000000000000000
s26=00000000 s27=00000000 d13=0000000000000000
s28=00000000 s29=00000000 d14=0000000000000000
s30=00000000 s31=00000000 d15=0000000000000000
FPSCR: 00000000
Aborted (core dumped)

I'll note that fprintf at the end of onenand_read should be
qemu_log(LOG_GUEST_ERROR) instead.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]