[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v10 16/24] gdbstub: add reverse step support in repl
From: |
Pavel Dovgalyuk |
Subject: |
[Qemu-devel] [PATCH v10 16/24] gdbstub: add reverse step support in replay mode |
Date: |
Thu, 17 Jan 2019 10:38:21 +0300 |
User-agent: |
StGit/0.17.1-dirty |
GDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub.
Reverse step is intended to step one instruction in the backwards
direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of
the prior snapshots and proceed to the desired step. It is equivalent
to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of
the replay log.
Signed-off-by: Pavel Dovgalyuk <address@hidden>
---
accel/tcg/translator.c | 1 +
cpus.c | 14 +++++++++++---
exec.c | 7 +++++++
gdbstub.c | 44 +++++++++++++++++++++++++++++++++++++++++---
include/sysemu/replay.h | 11 +++++++++++
replay/replay-debugging.c | 33 +++++++++++++++++++++++++++++++++
stubs/replay.c | 5 +++++
7 files changed, 109 insertions(+), 6 deletions(-)
diff --git a/accel/tcg/translator.c b/accel/tcg/translator.c
index afd0a49..33a543e 100644
--- a/accel/tcg/translator.c
+++ b/accel/tcg/translator.c
@@ -17,6 +17,7 @@
#include "exec/gen-icount.h"
#include "exec/log.h"
#include "exec/translator.h"
+#include "sysemu/replay.h"
/* Pairs with tcg_clear_temp_count.
To be called by #TranslatorOps.{translate_insn,tb_stop} if
diff --git a/cpus.c b/cpus.c
index aa33fb1..013341c 100644
--- a/cpus.c
+++ b/cpus.c
@@ -1104,9 +1104,17 @@ static bool cpu_can_run(CPUState *cpu)
static void cpu_handle_guest_debug(CPUState *cpu)
{
- gdb_set_stop_cpu(cpu);
- qemu_system_debug_request();
- cpu->stopped = true;
+ if (!replay_running_debug()) {
+ gdb_set_stop_cpu(cpu);
+ qemu_system_debug_request();
+ cpu->stopped = true;
+ } else {
+ if (!cpu->singlestep_enabled) {
+ cpu_single_step(cpu, SSTEP_ENABLE);
+ } else {
+ cpu_single_step(cpu, 0);
+ }
+ }
}
#ifdef CONFIG_LINUX
diff --git a/exec.c b/exec.c
index 895449f..6e95469 100644
--- a/exec.c
+++ b/exec.c
@@ -2740,6 +2740,13 @@ static void check_watchpoint(int offset, int len,
MemTxAttrs attrs, int flags)
QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
if (cpu_watchpoint_address_matches(wp, vaddr, len)
&& (wp->flags & flags)) {
+ if (replay_running_debug()) {
+ /*
+ * Don't process the watchpoints when we are
+ * in a reverse debugging operation.
+ */
+ return;
+ }
if (flags == BP_MEM_READ) {
wp->flags |= BP_WATCHPOINT_HIT_READ;
} else {
diff --git a/gdbstub.c b/gdbstub.c
index bfc7afb..442187d 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -39,6 +39,7 @@
#include "sysemu/kvm.h"
#include "exec/semihost.h"
#include "exec/exec-all.h"
+#include "sysemu/replay.h"
#ifdef CONFIG_USER_ONLY
#define GDB_ATTACHED "0"
@@ -344,6 +345,20 @@ typedef struct GDBState {
*/
static int sstep_flags = SSTEP_ENABLE|SSTEP_NOIRQ|SSTEP_NOTIMER;
+/* Retrieves flags for single step mode. */
+static int get_sstep_flags(void)
+{
+ /*
+ * In replay mode all events written into the log should be replayed.
+ * That is why NOIRQ flag is removed in this mode.
+ */
+ if (replay_mode != REPLAY_MODE_NONE) {
+ return SSTEP_ENABLE;
+ } else {
+ return sstep_flags;
+ }
+}
+
static GDBState *gdbserver_state;
bool gdb_has_xml;
@@ -434,7 +449,7 @@ static int gdb_continue_partial(GDBState *s, char
*newstates)
CPU_FOREACH(cpu) {
if (newstates[cpu->cpu_index] == 's') {
trace_gdbstub_op_stepping(cpu->cpu_index);
- cpu_single_step(cpu, sstep_flags);
+ cpu_single_step(cpu, get_sstep_flags());
}
}
s->running_state = 1;
@@ -453,7 +468,7 @@ static int gdb_continue_partial(GDBState *s, char
*newstates)
break; /* nothing to do here */
case 's':
trace_gdbstub_op_stepping(cpu->cpu_index);
- cpu_single_step(cpu, sstep_flags);
+ cpu_single_step(cpu, get_sstep_flags());
cpu_resume(cpu);
flag = 1;
break;
@@ -1433,9 +1448,28 @@ static int gdb_handle_packet(GDBState *s, const char
*line_buf)
addr = strtoull(p, (char **)&p, 16);
gdb_set_cpu_pc(s, addr);
}
- cpu_single_step(s->c_cpu, sstep_flags);
+ cpu_single_step(s->c_cpu, get_sstep_flags());
gdb_continue(s);
return RS_IDLE;
+ case 'b':
+ /* Backward debugging commands */
+ if (replay_mode == REPLAY_MODE_PLAY) {
+ switch (*p) {
+ case 's':
+ if (replay_reverse_step()) {
+ gdb_continue(s);
+ return RS_IDLE;
+ } else {
+ put_packet(s, "E14");
+ break;
+ }
+ default:
+ goto unknown_command;
+ }
+ } else {
+ put_packet(s, "E22");
+ }
+ goto unknown_command;
case 'F':
{
target_ulong ret;
@@ -1738,6 +1772,10 @@ static int gdb_handle_packet(GDBState *s, const char
*line_buf)
}
pstrcat(buf, sizeof(buf), ";multiprocess+");
+ if (replay_mode == REPLAY_MODE_PLAY) {
+ pstrcat(buf, sizeof(buf), ";ReverseStep+");
+ }
+
put_packet(s, buf);
break;
}
diff --git a/include/sysemu/replay.h b/include/sysemu/replay.h
index d7e859d..533003f 100644
--- a/include/sysemu/replay.h
+++ b/include/sysemu/replay.h
@@ -73,6 +73,17 @@ void replay_finish(void);
void replay_add_blocker(Error *reason);
/* Returns name of the replay log file */
const char *replay_get_filename(void);
+/*
+ * Start making one step in backward direction.
+ * Used by gdbstub for backwards debugging.
+ * Returns true on success.
+ */
+bool replay_reverse_step(void);
+/*
+ * Returns true if replay module is processing
+ * reverse_continue or reverse_step request
+ */
+bool replay_running_debug(void);
/* Processing the instructions */
diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c
index d99a9c1..a2fb857 100644
--- a/replay/replay-debugging.c
+++ b/replay/replay-debugging.c
@@ -21,6 +21,13 @@
#include "block/snapshot.h"
#include "migration/snapshot.h"
+static bool replay_is_debugging;
+
+bool replay_running_debug(void)
+{
+ return replay_is_debugging;
+}
+
void hmp_info_replay(Monitor *mon, const QDict *qdict)
{
if (replay_mode == REPLAY_MODE_NONE) {
@@ -219,3 +226,29 @@ void hmp_replay_seek(Monitor *mon, const QDict *qdict)
return;
}
}
+
+static void replay_stop_vm_debug(void *opaque)
+{
+ replay_is_debugging = false;
+ vm_stop(RUN_STATE_DEBUG);
+ replay_break(-1LL, NULL, NULL);
+}
+
+bool replay_reverse_step(void)
+{
+ Error *err = NULL;
+
+ assert(replay_mode == REPLAY_MODE_PLAY);
+
+ if (replay_get_current_step() != 0) {
+ replay_seek(replay_get_current_step() - 1, replay_stop_vm_debug, &err);
+ if (err) {
+ error_free(err);
+ return false;
+ }
+ replay_is_debugging = true;
+ return true;
+ }
+
+ return false;
+}
diff --git a/stubs/replay.c b/stubs/replay.c
index 4ac6078..521552f 100644
--- a/stubs/replay.c
+++ b/stubs/replay.c
@@ -80,3 +80,8 @@ void replay_mutex_lock(void)
void replay_mutex_unlock(void)
{
}
+
+bool replay_reverse_step(void)
+{
+ return false;
+}
- Re: [Qemu-devel] [PATCH v10 10/24] qapi: introduce replay.json for record/replay-related stuff, (continued)
- [Qemu-devel] [PATCH v10 11/24] replay: introduce info hmp/qmp command, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 12/24] replay: introduce breakpoint at the specified step, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 13/24] replay: implement replay-seek command, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 14/24] replay: refine replay-time module, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 15/24] replay: flush rr queue before loading the vmstate, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 16/24] gdbstub: add reverse step support in replay mode,
Pavel Dovgalyuk <=
- [Qemu-devel] [PATCH v10 18/24] replay: describe reverse debugging in docs/replay.txt, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 17/24] gdbstub: add reverse continue support in replay mode, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 19/24] replay: add BH oneshot event for block layer, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 20/24] replay: init rtc after enabling the replay, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 21/24] replay: document development rules, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 22/24] util/qemu-timer: refactor deadline calculation for external timers, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 23/24] replay: fix replay shutdown, Pavel Dovgalyuk, 2019/01/17
- [Qemu-devel] [PATCH v10 24/24] replay: rename step-related variables and functions, Pavel Dovgalyuk, 2019/01/17
- Re: [Qemu-devel] [PATCH v10 00/24] Fixing record/replay and adding reverse debugging, no-reply, 2019/01/31