[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 1/2] pcie: Add a simple PCIe ACS (Access Control
From: |
Knut Omang |
Subject: |
Re: [Qemu-devel] [PATCH 1/2] pcie: Add a simple PCIe ACS (Access Control Services) helper function |
Date: |
Wed, 23 Jan 2019 20:58:33 +0100 |
User-agent: |
Evolution 3.30.4 (3.30.4-1.fc29) |
On Wed, 2019-01-23 at 12:56 -0700, Alex Williamson wrote:
> On Wed, 23 Jan 2019 20:46:14 +0100
> Knut Omang <address@hidden> wrote:
>
> > On Wed, 2019-01-23 at 12:04 -0700, Alex Williamson wrote:
> > > On Wed, 23 Jan 2019 19:27:59 +0100
> > > Knut Omang <address@hidden> wrote:
> > >
> > > > Add a helper function to add PCIe capability for Access Control
> > > > Services (ACS)
> > > > ACS support in the associated root port is a prerequisite to be able to
> > > > do useful
> > > > passthrough with VFIO without Alex Williamson's pcie_acs_override
> > > > kernel patch.
> > >
> > > Define "useful". We can certainly still assign single function PFs to
> > > an L2 guest, or multi-function so long as all the functions are
> > > assigned. I won't deny that it's problematic, but it's a virtual
> > > topology that can be adjusted, so I think this is overstating things a
> > > bit.
> > >
> > > > Signed-off-by: Knut Omang <address@hidden>
> > > > ---
> > > > hw/pci/pcie.c | 14 ++++++++++++++
> > > > include/hw/pci/pcie.h | 1 +
> > > > include/hw/pci/pcie_regs.h | 4 ++++
> > > > 3 files changed, 19 insertions(+)
> > > >
> > > > diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
> > > > index 230478f..18feff5 100644
> > > > --- a/hw/pci/pcie.c
> > > > +++ b/hw/pci/pcie.c
> > > > @@ -906,3 +906,17 @@ void pcie_ats_init(PCIDevice *dev, uint16_t offset)
> > > >
> > > > pci_set_word(dev->wmask + dev->exp.ats_cap + PCI_ATS_CTRL, 0x800f);
> > > > }
> > > > +
> > > > +/* Add an ACS (Access Control Services) capability */
> > > > +void pcie_acs_init(PCIDevice *dev, uint16_t offset, uint8_t
> > > > egress_ctrl_vec_sz)
> > > > +{
> > > > + int ectrl_words = (egress_ctrl_vec_sz + 31) & ~31;
> > > > + pcie_add_capability(dev, PCI_EXT_CAP_ID_ACS, PCI_ACS_VER,
> > > > + offset, PCI_ACS_SIZEOF + ectrl_words);
> > >
> > > The egress control vector is only valid if the egress control
> > > capability is enabled, which is not set below, so this just seems to
> > > waste config space and introduces a meaningless function arg.
> >
> > I think my intention way back when I implemented this was to provide it as
> > a skeleton
> > for further detailing later, I use it with ectrl_words = 0 in the root port.
> >
> > > > + pci_set_word(dev->config + offset + PCI_ACS_CAP,
> > > > + PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | PCI_ACS_CR |
> PCI_ACS_UF);
> > >
> > > Some of these bits are only valid for downstream ports, it would
> > > violate the spec to set them on and endpoint.
> >
> > I must admit I haven't really dived deep here - I just set the cap bits
> > that one of my
> > servers sets for it's root ports - this is the one I used as model:
> >
> > 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
> > Root Port 1
> (rev
> > 22) (prog-if 00 [Normal decode])
> > 00:02.0 0604: 8086:3409 (rev 22)
> >
> > > > + pci_set_word(dev->config + offset + PCI_ACS_CTRL,
> > > > + PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | PCI_ACS_CR |
> PCI_ACS_UF);
> > >
> > > The default values of the control register bits is zero, so we
> > > shouldn't be setting it here and we should have a reset hook to clear
> > > it.
> >
> > I agree - I'll implement it,
> > thanks!
> >
> > Knut
> >
> > >
> > > > + /* Make CTRL register writable */
> > > > + memset(dev->wmask + offset + PCI_ACS_CTRL, 0xff, 2);
>
> While you're at it, it doesn't make sense to set unimplemented control
> bits as writable, this should match the bits set in the capabilities
> register. Thanks,
Good point, I'll fix that as well,
Thanks!
Knut
>
> Alex
>
> > > > +}
> > > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
> > > > index 5b82a0d..c2da148 100644
> > > > --- a/include/hw/pci/pcie.h
> > > > +++ b/include/hw/pci/pcie.h
> > > > @@ -129,6 +129,7 @@ void pcie_add_capability(PCIDevice *dev,
> > > > void pcie_sync_bridge_lnk(PCIDevice *dev);
> > > >
> > > > void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn);
> > > > +void pcie_acs_init(PCIDevice *dev, uint16_t offset, uint8_t
> > > > egress_ctrl_vec_sz);
> > > > void pcie_dev_ser_num_init(PCIDevice *dev, uint16_t offset, uint64_t
> > > > ser_num);
> > > > void pcie_ats_init(PCIDevice *dev, uint16_t offset);
> > > >
> > > > diff --git a/include/hw/pci/pcie_regs.h b/include/hw/pci/pcie_regs.h
> > > > index ad4e780..5e7409c 100644
> > > > --- a/include/hw/pci/pcie_regs.h
> > > > +++ b/include/hw/pci/pcie_regs.h
> > > > @@ -175,4 +175,8 @@ typedef enum PCIExpLinkWidth {
> > > > PCI_ERR_COR_INTERNAL |
> > > > \
> > > > PCI_ERR_COR_HL_OVERFLOW)
> > > >
> > > > +/* ACS */
> > > > +#define PCI_ACS_VER 0x2
> > > > +#define PCI_ACS_SIZEOF 8
> > > > +
> > > > #endif /* QEMU_PCIE_REGS_H */
> > >
> >
> >
>
[Qemu-devel] [PATCH 2/2] gen_pcie_root_port: Add ACS (Access Control Services) capability, Knut Omang, 2019/01/23
Re: [Qemu-devel] [PATCH 0/2] pcie: Add simple ACS "support" to the generic PCIe root port, no-reply, 2019/01/31