[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 05/26] tests/microbit-test: add TWI stub device test
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 05/26] tests/microbit-test: add TWI stub device test |
Date: |
Mon, 28 Jan 2019 18:10:26 +0000 |
From: Stefan Hajnoczi <address@hidden>
This test verifies that we read back the expected I2C WHO_AM_I register
values for the accelerometer/magnetometer.
Signed-off-by: Stefan Hajnoczi <address@hidden>
Message-id: address@hidden
Reviewed-by: Peter Maydell <address@hidden>
Signed-off-by: Peter Maydell <address@hidden>
---
tests/microbit-test.c | 44 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/tests/microbit-test.c b/tests/microbit-test.c
index 0c125535f64..dcdc0cd41a5 100644
--- a/tests/microbit-test.c
+++ b/tests/microbit-test.c
@@ -21,6 +21,49 @@
#include "hw/arm/nrf51.h"
#include "hw/gpio/nrf51_gpio.h"
#include "hw/timer/nrf51_timer.h"
+#include "hw/i2c/microbit_i2c.h"
+
+/* Read a byte from I2C device at @addr from register @reg */
+static uint32_t i2c_read_byte(uint32_t addr, uint32_t reg)
+{
+ uint32_t val;
+
+ writel(NRF51_TWI_BASE + NRF51_TWI_REG_ADDRESS, addr);
+ writel(NRF51_TWI_BASE + NRF51_TWI_TASK_STARTTX, 1);
+ writel(NRF51_TWI_BASE + NRF51_TWI_REG_TXD, reg);
+ val = readl(NRF51_TWI_BASE + NRF51_TWI_EVENT_TXDSENT);
+ g_assert_cmpuint(val, ==, 1);
+ writel(NRF51_TWI_BASE + NRF51_TWI_TASK_STOP, 1);
+
+ writel(NRF51_TWI_BASE + NRF51_TWI_TASK_STARTRX, 1);
+ val = readl(NRF51_TWI_BASE + NRF51_TWI_EVENT_RXDREADY);
+ g_assert_cmpuint(val, ==, 1);
+ val = readl(NRF51_TWI_BASE + NRF51_TWI_REG_RXD);
+ writel(NRF51_TWI_BASE + NRF51_TWI_TASK_STOP, 1);
+
+ return val;
+}
+
+static void test_microbit_i2c(void)
+{
+ uint32_t val;
+
+ /* We don't program pins/irqs but at least enable the device */
+ writel(NRF51_TWI_BASE + NRF51_TWI_REG_ENABLE, 5);
+
+ /* MMA8653 magnetometer detection */
+ val = i2c_read_byte(0x3A, 0x0D);
+ g_assert_cmpuint(val, ==, 0x5A);
+
+ val = i2c_read_byte(0x3A, 0x0D);
+ g_assert_cmpuint(val, ==, 0x5A);
+
+ /* LSM303 accelerometer detection */
+ val = i2c_read_byte(0x3C, 0x4F);
+ g_assert_cmpuint(val, ==, 0x40);
+
+ writel(NRF51_TWI_BASE + NRF51_TWI_REG_ENABLE, 0);
+}
static void test_nrf51_gpio(void)
{
@@ -247,6 +290,7 @@ int main(int argc, char **argv)
qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio);
qtest_add_func("/microbit/nrf51/timer", test_nrf51_timer);
+ qtest_add_func("/microbit/microbit/i2c", test_microbit_i2c);
ret = g_test_run();
--
2.20.1
- [Qemu-devel] [PULL 00/26] target-arm queue, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 01/26] target/arm: Fix validation of 32-bit address spaces for aa32, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 03/26] gdbstub: fix gdb_get_cpu(s, pid, tid) when pid and/or tid are 0, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 02/26] target/arm: v8m: Ensure IDAU is respected if SAU is disabled, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 08/26] MAINTAINERS: update microbit ARM board files, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 05/26] tests/microbit-test: add TWI stub device test,
Peter Maydell <=
- [Qemu-devel] [PULL 07/26] accel/tcg/user-exec: Don't parse aarch64 insns to test for read vs write, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 09/26] target/arm: Don't clear supported PMU events when initializing PMCEID1, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 10/26] memory: add memory_region_flush_rom_device(), Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 06/26] exec.c: Use correct attrs in cpu_memory_rw_debug(), Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 04/26] arm: Stub out NRF51 TWI magnetometer/accelerometer detection, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 12/26] arm: Instantiate NRF51 special NVM's and NVMC, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 11/26] hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 15/26] tests/microbit-test: Check nRF51 UART functionality, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 17/26] xlnx-zynqmp: Don't create rpu-cluster if there are no RPUs, Peter Maydell, 2019/01/28
- [Qemu-devel] [PULL 13/26] tests/libqtest: Introduce qtest_init_with_serial(), Peter Maydell, 2019/01/28