qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v11 2/3] util/mmap-alloc: support MAP_SYNC in qe


From: Yi Zhang
Subject: Re: [Qemu-devel] [PATCH v11 2/3] util/mmap-alloc: support MAP_SYNC in qemu_ram_mmap()
Date: Wed, 30 Jan 2019 18:36:46 +0800
User-agent: Mutt/1.5.24 (2015-08-30)

On 2019-01-29 at 08:50:46 -0500, Michael S. Tsirkin wrote:
> On Tue, Jan 29, 2019 at 10:49:09PM +0800, Zhang, Yi wrote:
> > From: Zhang Yi <address@hidden>
> > 
> > When a file supporting DAX is used as vNVDIMM backend, mmap it with
> > MAP_SYNC flag in addition which can ensure file system metadata
> > synced in each guest writes to the backend file, without other QEMU
> > actions (e.g., periodic fsync() by QEMU).
> > 
> > Current, We have below different possible use cases:
> > 
> > 1. pmem=on is set, shared=on is set, MAP_SYNC supported:
> >    a: backend is a dax supporting file.
> >     - MAP_SYNC will active.
> >    b: backend is not a dax supporting file.
> >     - mmap will trigger a warning. then MAP_SYNC flag will be ignored
> > 
> > 2. The rest of cases:
> >    - we will never pass the MAP_SYNC to mmap2
> > 
> > Signed-off-by: Haozhong Zhang <address@hidden>
> > Signed-off-by: Zhang Yi <address@hidden>
> > ---
> >  include/qemu/osdep.h | 21 +++++++++++++++++++++
> >  util/mmap-alloc.c    | 28 +++++++++++++++++++++++++++-
> >  2 files changed, 48 insertions(+), 1 deletion(-)
> > 
> > diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
> > index 457d24e..96209bb 100644
> > --- a/include/qemu/osdep.h
> > +++ b/include/qemu/osdep.h
> > @@ -419,6 +419,27 @@ void qemu_anon_ram_free(void *ptr, size_t size);
> >  #  define QEMU_VMALLOC_ALIGN getpagesize()
> >  #endif
> >  
> > +/*
> > + * MAP_SHARED_VALIDATE and MAP_SYNC are introduced in Linux kernel
> > + * 4.15, so they may not be defined when compiling on older kernels.
> > + */
> > +#ifdef CONFIG_LINUX
> > +
> > +#include <linux/mman.h>
> > +
> > +#ifndef MAP_SYNC
> > +#define MAP_SYNC 0x80000
> > +#endif
> > +
> > +#ifndef MAP_SHARED_VALIDATE
> > +#define MAP_SHARED_VALIDATE 0x03
> > +#endif
> > +
> 
> I commented on this part in v7. That's a wrong way to handle
> compatibility.
MAP_SYNC and MAP_SHARED_VALIDATE have not defined at pre 4.15 kernel.
to handle the compatibility we should defined it, Right?, That is Why I
changed the value to run time handle the compatibility.

in previous version, you comments that we shouldn't direct define that
in our own headers to avoid duplicated code.

So we add #include <linux/mman.h> Right?

Then shouldn't consider build qemu on pre 4.15 kernel header? won't
failed?

#ifndef MAP_SYNC
#define MAP_SYNC 0x80000
#endif

#ifndef MAP_SHARED_VALIDATE
#define MAP_SHARED_VALIDATE 0x03
#endif

forgive my poor understanding, I'm getting more confused.


> 
> We had this discussion several times in the past. commit log doesn't
> mention any reasons to ignore this.  All for setting a single bit in a
> single system call.  This is getting discouraging.
> 
> 
> > +#else  /* !CONFIG_LINUX */
> > +#define MAP_SYNC              0x0
> > +#define MAP_SHARED_VALIDATE   0x0
> > +#endif /* CONFIG_LINUX */
> > +
> >  #ifdef CONFIG_POSIX
> >  struct qemu_signalfd_siginfo {
> >      uint32_t ssi_signo;   /* Signal number */
> > diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c
> > index 97bbeed..2c86ad2 100644
> > --- a/util/mmap-alloc.c
> > +++ b/util/mmap-alloc.c
> > @@ -101,6 +101,7 @@ void *qemu_ram_mmap(int fd,
> >  #else
> >      void *ptr = mmap(0, total, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 
> > 0);
> >  #endif
> > +    int mmap_xflags = 0;
> 
> That's not a good variable name. It's extra for you since
> you are writing the patch but it makes no sense
> in the context of the function. Just mmap_flags
> will do - and I would put all flags there, not just
> the "extra" that this patch is adding.
> 
> 
> >      size_t offset;
> >      void *ptr1;
> >  
> > @@ -111,13 +112,38 @@ void *qemu_ram_mmap(int fd,
> >      assert(is_power_of_2(align));
> >      /* Always align to host page size */
> >      assert(align >= getpagesize());
> > +    if (shared && is_pmem) {
> > +        mmap_xflags = MAP_SYNC | MAP_SHARED_VALIDATE;
> > +    }
> >  
> >      offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr;
> > +retry_mmap:
> >      ptr1 = mmap(ptr + offset, size, PROT_READ | PROT_WRITE,
> >                  MAP_FIXED |
> >                  (fd == -1 ? MAP_ANONYMOUS : 0) |
> > -                (shared ? MAP_SHARED : MAP_PRIVATE),
> > +                (shared ? MAP_SHARED : MAP_PRIVATE) | mmap_xflags,
> >                  fd, 0);
> > +
> > +    /* if map failed with MAP_SHARED_VALIDATE | MAP_SYNC,
> > +     * we try with MAP_SHARED_VALIDATE without MAP_SYNC
> > +     */
> > +    if (ptr1 == MAP_FAILED &&
> > +        mmap_xflags == (MAP_SYNC | MAP_SHARED_VALIDATE)) {
> > +        if (errno == ENOTSUP) {
> > +            perror("failed to validate with mapping flags");
> > +        }
> > +        mmap_xflags = MAP_SHARED_VALIDATE;
> > +        goto retry_mmap;
> 
> Have you read
> https://homepages.cwi.nl/~storm/teaching/reader/Dijkstra68.pdf
> 
> Please just call the function twice. You don't need goto
> to repeat a single line.
> 
> 
> > +    }
> > +    /* MAP_SHARED_VALIDATE flag is available since Linux 4.15
> > +     * Test only with MAP_SHARED_VALIDATE flag for compatibility.
> > +     * Then ignore the MAP_SHARED_VALIDATE flag and retry again
> > +     */
> > +    if (mmap_xflags == MAP_SHARED_VALIDATE &&
> > +        ptr1 == MAP_FAILED) {
> > +            mmap_xflags &= ~MAP_SHARED_VALIDATE;
> > +            goto retry_mmap;
> > +    }
> >      if (ptr1 == MAP_FAILED) {
> >          munmap(ptr, total);
> >          return MAP_FAILED;
> > -- 
> > 2.7.4



reply via email to

[Prev in Thread] Current Thread [Next in Thread]