[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4] virtio-blk: set correct config size for the
From: |
Stefano Garzarella |
Subject: |
Re: [Qemu-devel] [PATCH v4] virtio-blk: set correct config size for the host driver |
Date: |
Wed, 13 Feb 2019 13:17:03 +0100 |
User-agent: |
NeoMutt/20180716 |
On Wed, Feb 13, 2019 at 09:32:27AM +0100, Stefano Garzarella wrote:
> On Wed, Feb 13, 2019 at 04:01:43PM +0800, Stefan Hajnoczi wrote:
> > On Wed, Feb 13, 2019 at 09:48:57AM +0800, Changpeng Liu wrote:
> > > Commit caa1ee43 "vhost-user-blk: add discard/write zeroes features
> > > support" added fields to struct virtio_blk_config. This changes
> > > the size of the config space and breaks migration from QEMU 3.1
> > > and older:
> > >
> > > qemu-system-ppc64: get_pci_config_device: Bad config data: i=0x10 read:
> > > 41 device: 1 cmask: ff wmask: 80 w1cmask:0
> > > qemu-system-ppc64: Failed to load PCIDevice:config
> > > qemu-system-ppc64: Failed to load virtio-blk:virtio
> > > qemu-system-ppc64: error while loading state for instance 0x0 of device
> > > 'address@hidden:01.0/virtio-blk'
> > > qemu-system-ppc64: load of migration failed: Invalid argument
> > >
> > > Since virtio-blk doesn't support the "discard" and "write zeroes"
> > > features, it shouldn't even expose the associated fields in the
> > > config space actually. Just include all fields up to num_queues to
> > > match QEMU 3.1 and older.
> > >
> > > Signed-off-by: Changpeng Liu <address@hidden>
> > > ---
> > > hw/block/virtio-blk.c | 13 +++++++++----
> > > 1 file changed, 9 insertions(+), 4 deletions(-)
> >
> > Stefano: Please rebase your DISCARD/WRITE_ZEROES series onto this and
> > check that the config space is correctly sized. Machine types before
> > 4.0 shouldn't have these fields so that the config space size remains
> > unchanged.
>
> Sure!
>
> Since I should set a correct config size checking if new features are
> enabled or not at runtime, should be better to add a variable and an array
> of sizes like in virtio-net?
In my series "[PATCH v4 0/6] virtio-blk: add DISCARD and WRITE_ZEROES"
I'm adding the host_features field in VirtIOBlock. Then, I could add
something like the following patch (proof of concept) inspired by the
virtio-net approach, that would be simplest to maintain when we will add
new features.
What do you think?
Thanks,
Stefano
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 843bb2bec8..84dcc1406c 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -28,6 +28,51 @@
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-access.h"
+/*
+ * Calculate the number of bytes up to and including the given 'field' of
+ * 'container'.
+ */
+#define endof(container, field) \
+ (offsetof(container, field) + sizeof_field(container, field))
+
+typedef struct VirtIOFeature {
+ uint64_t flags;
+ size_t end;
+} VirtIOFeature;
+
+static VirtIOFeature feature_sizes[] = {
+ {.flags = 1ULL << VIRTIO_NET_F_SIZE_MAX,
+ .end = endof(struct virtio_blk_config, size_max)},
+ {.flags = 1ULL << VIRTIO_NET_F_SEG_MAX,
+ .end = endof(struct virtio_blk_config, seg_max)},
+ {.flags = 1ULL << VIRTIO_NET_F_GEOMETRY,
+ .end = endof(struct virtio_blk_config, geometry)},
+ {.flags = 1ULL << VIRTIO_NET_F_BLK_SIZE,
+ .end = endof(struct virtio_blk_config, blk_size)},
+ {.flags = 1ULL << VIRTIO_NET_F_TOPOLOGY,
+ .end = endof(struct virtio_blk_config, opt_io_size)},
+ {.flags = 1ULL << VIRTIO_NET_F_CONFIG_WCE,
+ .end = endof(struct virtio_blk_config, wce)},
+ {.flags = 1ULL << VIRTIO_NET_F_MQ,
+ .end = endof(struct virtio_blk_config, num_queues)},
+ {}
+};
+
+static void virtio_blk_set_config_size(VirtIOBlock *s, uint64_t host_features)
+{
+ int i, config_size;
+
+ config_size = endof(struct virtio_blk_config, capacity);
+
+ for (i = 0; feature_sizes[i].flags != 0; i++) {
+ if (host_features & feature_sizes[i].flags) {
+ config_size = MAX(feature_sizes[i].end, config_size);
+ }
+ }
+
+ s->config_size = config_size;
+}
+
static void virtio_blk_init_request(VirtIOBlock *s, VirtQueue *vq,
VirtIOBlockReq *req)
{
@@ -757,7 +802,7 @@ static void virtio_blk_update_config(VirtIODevice *vdev,
uint8_t *config)
blkcfg.alignment_offset = 0;
blkcfg.wce = blk_enable_write_cache(s->blk);
virtio_stw_p(vdev, &blkcfg.num_queues, s->conf.num_queues);
- memcpy(config, &blkcfg, sizeof(struct virtio_blk_config));
+ memcpy(config, &blkcfg, s->config_size);
}
static void virtio_blk_set_config(VirtIODevice *vdev, const uint8_t *config)
@@ -765,7 +810,7 @@ static void virtio_blk_set_config(VirtIODevice *vdev, const
uint8_t *config)
VirtIOBlock *s = VIRTIO_BLK(vdev);
struct virtio_blk_config blkcfg;
- memcpy(&blkcfg, config, sizeof(blkcfg));
+ memcpy(&blkcfg, config, s->config_size);
aio_context_acquire(blk_get_aio_context(s->blk));
blk_set_enable_write_cache(s->blk, blkcfg.wce != 0);
@@ -948,8 +993,9 @@ static void virtio_blk_device_realize(DeviceState *dev,
Error **errp)
return;
}
- virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
- sizeof(struct virtio_blk_config));
+ virtio_blk_set_config_size(s, s->host_features);
+
+ virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK, s->config_size);
s->blk = conf->conf.blk;
s->rq = NULL;
Re: [Qemu-devel] [PATCH v4] virtio-blk: set correct config size for the host driver, Greg Kurz, 2019/02/13