[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 00/14] hw/Kconfig: Fixes when running ./configur
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-devel] [PATCH 00/14] hw/Kconfig: Fixes when running ./configure --without-default-devices |
Date: |
Tue, 19 Mar 2019 17:45:32 +0100 |
Le mar. 19 mars 2019 16:03, Paolo Bonzini <address@hidden> a écrit :
> On 16/03/19 21:08, Philippe Mathieu-Daudé wrote:
> > Hi,
> >
> > This series contains Kconfig fixes to be able to run binaries
> > built using: './configure --without-default-devices'.
>
>
> Hi, I applied 1/2/3/6/7/8/9/12/13/14, with select replaced by imply.
> For patches 4/5, the right place to modify is "config PC" in addition
> to replacing select with imply.
>
Ok thanks!
> Patch 10 should not be needed since there is no equivalent of
> CONFIG_PCI_DEVICES for virtio.
>
Ok.
> For patch 11 (and 7) I have posted two patches to honor "-vga none", so
> that the boards can be configured with --without-default-devices too (in
> the case of Fulong2e, this will of course apply only after it is
> converted to Kconfig).
>
Ok, thanks.
Phil.
> Paolo
>
> > Regards,
> >
> > Phil.
> >
> > Philippe Mathieu-Daudé (14):
> > hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
> > hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
> > hw/i386/Kconfig: Q35 machine requires e1000e network card
> > hw/i386/Kconfig: isapc machine requires VGA display
> > hw/i386/Kconfig: isapc machine requires e1000 network card
> > hw/mips/Kconfig: Malta machine requires the pcnet network card
> > hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
> > hw/ppc/Kconfig: Bamboo machine requires e1000 network card
> > hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
> > hw/s390x/Kconfig: s390x machines require virtio-net-ccw device
> > hw/sparc/Kconfig: SPARCstation machine requires the TCX display
> > hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
> > hw/hppa/Kconfig: Dino board requires e1000 network card
> > hw/alpha/Kconfig: DP264 hardware requires e1000 network card
> >
> > default-configs/mips-softmmu-common.mak | 1 +
> > default-configs/mips64el-softmmu.mak | 2 ++
> > default-configs/sparc-softmmu.mak | 1 -
> > hw/alpha/Kconfig | 1 +
> > hw/hppa/Kconfig | 1 +
> > hw/i386/Kconfig | 3 +++
> > hw/isa/Kconfig | 2 ++
> > hw/ppc/Kconfig | 2 ++
> > hw/s390x/Kconfig | 1 +
> > hw/sh4/Kconfig | 1 +
> > hw/sparc/Kconfig | 2 +-
> > 11 files changed, 15 insertions(+), 2 deletions(-)
> >
>
>
>
- [Qemu-devel] [PATCH 10/14] hw/s390x/Kconfig: s390x machines require virtio-net-ccw device, (continued)
[Qemu-devel] [PATCH 14/14] hw/alpha/Kconfig: DP264 hardware requires e1000 network card, Philippe Mathieu-Daudé, 2019/03/16
Re: [Qemu-devel] [PATCH 00/14] hw/Kconfig: Fixes when running ./configure --without-default-devices, Paolo Bonzini, 2019/03/19
- Re: [Qemu-devel] [PATCH 00/14] hw/Kconfig: Fixes when running ./configure --without-default-devices,
Philippe Mathieu-Daudé <=