[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 05/10] hw/arm/virt: Add ACPI support for devi
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v3 05/10] hw/arm/virt: Add ACPI support for device memory cold-plug |
Date: |
Mon, 1 Apr 2019 15:34:25 +0200 |
On Thu, 21 Mar 2019 10:47:40 +0000
Shameer Kolothum <address@hidden> wrote:
> This adds support to build the aml code so that Guest(ACPI boot)
> can see the cold-plugged device memory. Memory cold plug support
> with DT boot is not yet enabled.
>
> Signed-off-by: Shameer Kolothum <address@hidden>
> ---
> default-configs/arm-softmmu.mak | 2 ++
> hw/acpi/generic_event_device.c | 23 +++++++++++++++++++++++
> hw/arm/virt-acpi-build.c | 9 +++++++++
> hw/arm/virt.c | 23 +++++++++++++++++++++++
> include/hw/acpi/generic_event_device.h | 5 +++++
> include/hw/arm/virt.h | 2 ++
> 6 files changed, 64 insertions(+)
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 795cb89..6db444e 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -162,3 +162,5 @@ CONFIG_LSI_SCSI_PCI=y
>
> CONFIG_MEM_DEVICE=y
> CONFIG_DIMM=y
> +CONFIG_ACPI_MEMORY_HOTPLUG=y
> +CONFIG_ACPI_HW_REDUCED=y
> diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c
> index b21a551..0b32fc9 100644
> --- a/hw/acpi/generic_event_device.c
> +++ b/hw/acpi/generic_event_device.c
> @@ -16,13 +16,26 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "exec/address-spaces.h"
> #include "hw/sysbus.h"
> #include "hw/acpi/acpi.h"
> #include "hw/acpi/generic_event_device.h"
> +#include "hw/mem/pc-dimm.h"
>
> static void virt_device_plug_cb(HotplugHandler *hotplug_dev,
> DeviceState *dev, Error **errp)
> {
> + VirtAcpiState *s = VIRT_ACPI(hotplug_dev);
> +
> + if (s->memhp_state.is_enabled &&
> + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> + acpi_memory_plug_cb(hotplug_dev, &s->memhp_state,
> + dev, errp);
> + } else {
> + error_setg(errp, "virt: device plug request for unsupported device"
> + " type: %s", object_get_typename(OBJECT(dev)));
> + }
> }
>
> static void virt_send_ged(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
> @@ -31,9 +44,19 @@ static void virt_send_ged(AcpiDeviceIf *adev,
> AcpiEventStatusBits ev)
>
> static void virt_device_realize(DeviceState *dev, Error **errp)
> {
> + VirtAcpiState *s = VIRT_ACPI(dev);
> +
> + if (s->memhp_state.is_enabled) {
> + acpi_memory_hotplug_init(get_system_memory(), OBJECT(dev),
> + &s->memhp_state,
> + s->memhp_base);
> + }
> }
>
> static Property virt_acpi_properties[] = {
> + DEFINE_PROP_UINT64("memhp_base", VirtAcpiState, memhp_base, 0),
it's preferred to use '-' in property names
> + DEFINE_PROP_BOOL("memory-hotplug-support", VirtAcpiState,
> + memhp_state.is_enabled, true),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index bf9c0bc..20d3c83 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -40,6 +40,7 @@
> #include "hw/loader.h"
> #include "hw/hw.h"
> #include "hw/acpi/aml-build.h"
> +#include "hw/acpi/memory_hotplug.h"
> #include "hw/pci/pcie_host.h"
> #include "hw/pci/pci.h"
> #include "hw/arm/virt.h"
> @@ -49,6 +50,13 @@
> #define ARM_SPI_BASE 32
> #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>
> +static void acpi_dsdt_add_memory_hotplug(Aml *scope, MachineState *ms)
> +{
it's dummy wrapper that never will be reused,
I suggest to just inline contents at call site and drop wrapper.
> + uint32_t nr_mem = ms->ram_slots;
> +
> + build_memory_hotplug_aml(scope, nr_mem, "\\_SB", NULL,
> AML_SYSTEM_MEMORY);
> +}
> +
> static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus)
> {
> uint16_t i;
> @@ -740,6 +748,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> VirtMachineState *vms)
> * the RTC ACPI device at all when using UEFI.
> */
> scope = aml_scope("\\_SB");
> + acpi_dsdt_add_memory_hotplug(scope, MACHINE(vms));
> acpi_dsdt_add_cpus(scope, vms->smp_cpus);
> acpi_dsdt_add_uart(scope, &memmap[VIRT_UART],
> (irqmap[VIRT_UART] + ARM_SPI_BASE));
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index d0ff20d..13db0e9 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -133,6 +133,7 @@ static const MemMapEntry base_memmap[] = {
> [VIRT_GPIO] = { 0x09030000, 0x00001000 },
> [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 },
> [VIRT_SMMU] = { 0x09050000, 0x00020000 },
> + [VIRT_PCDIMM_ACPI] = { 0x09070000, 0x00010000 },
^^^^^^^^^^^
where from this magic number comes?
> [VIRT_MMIO] = { 0x0a000000, 0x00000200 },
> /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size
> */
> [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },
> @@ -516,6 +517,18 @@ static void fdt_add_pmu_nodes(const VirtMachineState
> *vms)
> }
> }
>
> +static DeviceState *create_virt_acpi(VirtMachineState *vms)
> +{
> + DeviceState *dev;
> +
> + dev = qdev_create(NULL, "virt-acpi");
> + qdev_prop_set_uint64(dev, "memhp_base",
> + vms->memmap[VIRT_PCDIMM_ACPI].base);
> + qdev_init_nofail(dev);
> +
> + return dev;
Probably no worth a wrapper either, since code is trivial and isn't reused
elsewhere.
> +}
> +
> static void create_its(VirtMachineState *vms, DeviceState *gicdev)
> {
> const char *itsclass = its_class_name();
> @@ -1644,6 +1657,8 @@ static void machvirt_init(MachineState *machine)
>
> create_platform_bus(vms, pic);
>
> + vms->acpi = create_virt_acpi(vms);
> +
> vms->bootinfo.ram_size = machine->ram_size;
> vms->bootinfo.kernel_filename = machine->kernel_filename;
> vms->bootinfo.kernel_cmdline = machine->kernel_cmdline;
> @@ -1828,11 +1843,19 @@ static void virt_memory_pre_plug(HotplugHandler
> *hotplug_dev, DeviceState *dev,
> static void virt_memory_plug(HotplugHandler *hotplug_dev,
> DeviceState *dev, Error **errp)
> {
> + HotplugHandlerClass *hhc;
> VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> Error *local_err = NULL;
>
> pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi);
> + hhc->plug(HOTPLUG_HANDLER(vms->acpi), dev, &error_abort);
>
> +out:
> error_propagate(errp, local_err);
> }
>
> diff --git a/include/hw/acpi/generic_event_device.h
> b/include/hw/acpi/generic_event_device.h
> index f314515..262ca7d 100644
> --- a/include/hw/acpi/generic_event_device.h
> +++ b/include/hw/acpi/generic_event_device.h
> @@ -18,12 +18,17 @@
> #ifndef HW_ACPI_GED_H
> #define HW_ACPI_GED_H
>
> +#include "hw/acpi/memory_hotplug.h"
> +
> #define TYPE_VIRT_ACPI "virt-acpi"
> #define VIRT_ACPI(obj) \
> OBJECT_CHECK(VirtAcpiState, (obj), TYPE_VIRT_ACPI)
>
> typedef struct VirtAcpiState {
> SysBusDevice parent_obj;
> + MemHotplugState memhp_state;
> + hwaddr memhp_base;
> } VirtAcpiState;
>
> +
> #endif
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index 507517c..c5e4c96 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -77,6 +77,7 @@ enum {
> VIRT_GPIO,
> VIRT_SECURE_UART,
> VIRT_SECURE_MEM,
> + VIRT_PCDIMM_ACPI,
> VIRT_LOWMEMMAP_LAST,
> };
>
> @@ -132,6 +133,7 @@ typedef struct {
> uint32_t iommu_phandle;
> int psci_conduit;
> hwaddr highest_gpa;
> + DeviceState *acpi;
> } VirtMachineState;
>
> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
- Re: [Qemu-devel] [PATCH v3 05/10] hw/arm/virt: Add ACPI support for device memory cold-plug,
Igor Mammedov <=